• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.6
• /
• pp.25-35
• /
• 1998

The control system architecture in switching systems have undergone numerous changes to provide various call processing capability needed in telecommunication services. During call processing in a distributed switching control environment, the delay effect due to communication among main processors or peripheral controllers is one of the limiting factors which affect the system performance. In this paper, we propose a performance model for an IPC(Inter Processor Communication) interface hardware block which is required on the ATM cell-based message processing in a distributed ATM exchange system, and analyze the primary causes which affect the processor performance through the simulation. Consequently, It can be shown that the local CPU of the several components(resources) related to the IPC scheme is a bottleneck factor in achieving the maximum system performance from the simulation results, such as the utilization of each processing component according to the change of the input message rate, and the queue length and processing delay according to input message rate. And we also give some useful results such as the maximum message processing capacity according to the change of the performance of local CPU, and the local CPU maximum throughput according to the change of average message length, which is applicable as a reference data for the improvement or expansion of the ATM control system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5C
• /
• pp.344-354
• /
• 2005

In this paper, we proposed a new lifting architecture for JPEG2000 and implemented to ASIC. We proposed a new cell to execute unit calculation of lifting using the property of lifting which is the repetitious arithmetic with same structure, and then recomposed the whole lifting by expanding it. After the operational sequence of lifting arithmetic was analyzed in detail and the causality was imposed for implementation to hardware, the unit cell was optimized. A new lifting kernel was organized by expanding simply the unit cell, and a lifting processor was implemented for Motion JPEG2000 using it. The implemented lifting kernel can accommodate the tile size of $1024{\times}1024$, and support both lossy compression using the (9,7) filter and lossless compression using (5,3) filter. Also, it has the same output rate as input rate, and can continuously output the wavelet coefficients of 4 types(LL, LH, HL, HH) at the same time. The implemented lifting processor completed a course of ASIC using $0.35{\mu}m$ CMOS library of SAMSUNG. It occupied about 90,000 gates, and stably operated in about 150MHz though difference from the used macro cell for the multiplier. Finally, the improved operated in about 150MHz though difference from the used macro cell for the multiplier. Finally, the performance can be identified in comparison with the previous researches and commercial IPs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7C
• /
• pp.647-657
• /
• 2005

In this paper, we proposed a new lifting architecture for JPEG2000 and implemented to ASIC. We proposed a new cell to execute unit calculation of lifting using the property of lifting which is the repetitious arithmetic with same structure, and then recomposed the whole lifting by expanding it. After the operational sequence of lifting arithmetic was analyzed in detail and the causality was imposed for implementation to hardware, the unit cell was optimized. A new lifting kernel was organized by expanding simply the unit cell, and a lifting processor was implemented for Motion JPEG2000 using it. The implemented lifting kernel can accommodate the tile size of 1024$\times$1024, and support both lossy compression using the (9,7) filter and lossless compression using (5,3) filter. Also, it has the same output rate as input rate, and can continuously output the wavelet coefficients of 4 types(LL, LH, HL, HH) at the same time. The implemented lifting processor completed a course of ASIC using 0.35$\mu$m CMOS library of SAMSUNG. It occupied about 90,000 gates, and stably operated in about 150MHz though difference from the used macro cell for the multiplier. Finally, the improved operated in about 150MHz though difference from the used macro cell for the multiplier. Finally, the performance can be identified in comparison with the previous researches and commercial IPs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1082-1088
• /
• 2005

Generating fast round key in AES Rijndael algorithm using three key sizes, such as 128, 192, and 256-bit keys is a critical factor to develop high throughput AES processors. In this paper, we propose on-the-fly round key generator which is applicable to the pipelined and non-pipelined AES processor in which cipher and decipher nodes must be implemented on a chip. The proposed round key generator has modular and area-and-time efficient structure implemented with simple connection of two key expander modules, such as key_exp_m and key_exp_s module. The round key generator for non-pipelined AES processor with support of three key lengths and cipher/decipher modes has about 7.8-ns delay time under 0.25um 2.5V CMOS standard cell library and consists of about 17,700 gates.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1C
• /
• pp.112-121
• /
• 2002

In this paper, we present a design of a hash processor for data security systems. Two standard hash algorithms, Sha-1(American) and HAS-1600(Korean), are implemented on a single hash engine to support real time processing of the algorithms. The hash processor can also be used as a PRNG(Pseudo-random number generator) by utilizing SHA-1 hash iterations, which is being used in the Intel software library. Because both SHA-1 and HAS-160 have the same step operation, we could reduce hardware complexity by sharing the computation unit. Due to precomputation of message variables and two-stage pipelined structure, the critical path of the processor was shortened and overall performance was increased. We estimate performance of the hash processor about 624 Mbps for SHA-1 and HAS-160, and 195 Mbps for pseudo-random number generation, both at 100 MHz clock, based on Samsung 0.5um CMOS standard cell library. To our knowledge, this gives the best performance for processing the hash algorithms.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.393-396
• /
• 2009

This paper describes a design of variable-length FFT/IFFT processor for OFDM-based communication systems. The designed FFT/IFFT processor adopts the in-place single-memory architecture, and uses a hybrid structure of radix-4 and radix-2 DIF algorithms to accommodate FFT lengths of $N=64{\times}2^k$ ($0{\leq}k{\leq}7$). To achieve both memory size reduction and the improved SQNR, a two-step conditional scaling technique is devised, which conditionally scales the intermediate results of each computational stage. The performance analysis results show that the average SQNR's of 64~8,192-point FFT's are over 60-dB. The processor synthesized with a $0.35-{\mu}m$ CMOS cell library can operate with 75-MHz@3.3-V clock, and 64-point and 8,192-point FFT's can be computed in $2.55-{\mu}s$ and $762.7-{\mu}s$, respectively, thus it satisfies the specifications of wireless LAN, DMB, and DVB systems.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.450-452
• /
• 1993

In this study, a method is suggested to design the A/D conversion system which has high resolution to convert load cell signal. First, hardware was designed to reduce the offset voltage of integrator and comparator. And then, a calibration software technique was performed to obtain the stable data from A/D converter. The optimal parameters of each elements in the circuits was selected using the SPICE simulation. The main advantage of our method is high precision A/D converter can be constructed with low cost and high confidence. Therefore proposed method is expected to be used in the industrial field where a high precision measurement is required.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5C
• /
• pp.534-539
• /
• 2006

In this paper, we propose a new frame prediction filtering technique and a hardware(H/W) architecture for scalable video coding. We try to evaluate MCTF(motion compensated temporal filtering) and hierarchical B-picture which are a technique for eliminate correlation between video frames. Since the techniques correspond to non-causal system in time, these have fundamental defects which are long latency time and large size of frame buffer. We propose a new architecture to be efficiently implemented by reconfiguring non-causal system to causal system. We use the property of a repetitive arithmetic and propose a new frame prediction filtering cell(FPFC). By expanding FPFC we reconfigure the whole arithmetic architecture. After the operational sequence of arithmetic is analyzed in detail and the causality is imposed to implement in hardware, the unit cell is optimized. A new FPFC kernel was organized as simple as possible by repeatedly arranging the unit cells and a FPFC processor is realized for scalable video coding.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.289-440
• /
• 1998

This paper describes an interconnection network structure which transports information among processors through a high speed ATM switch. To efficiently use the high speed ATM switch for the message-based multiprocessor, we implemented the cell router that performs multiplexing and demultiplexing of cells from/to processors. In this system, we use the expanded internal cell format including 3bytes for switch routing information. This interconnection network has 3 stage routing strategies: ATM switch routing using switch routing information, cell router routing using a virtual path identifier (VPI) and cell reassembly routing using a virtual channel indentifier (VCI). The interconnection network consists of the NxN folded switch and N cell routers with the M processor interface. Therefore, the maximum number of NxM processors can be interconnected for message communication. This interconnection network using the ATM switch makes a significant improvement in terms of message passing latency and scalability. Additionally, we evaluated the transmission overhead in this interconnection network using ATM switch.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1355-1362
• /
• 2007

In this paper, these setting can be useful in the microprocessor and sensor that designed to improve the efficiency of the photovoltaic system the photovoltaic position tracker device, and compared the normal photovoltaic system of fixed form with the photovoltaic system of solar position tracked form. Moreover, this is compared the catalogue of solar cell module and the simulation through a mathematics modelling with the solar cell's characteristic interpreting and that is composed an power conversion system with boost converter and voltage source inverter. This device can be used to the constant voltage control method for maximum power point tracking in boost converter control. Experiment Results is shown that using a SPWM(Sinusoidal Pulse Width Modulation) control method in inverter control.