• 제목/요약/키워드: Cell Area

검색결과 3,125건 처리시간 0.035초

다중 안테나 통신 시스템을 위한 저복잡도 채널 전처리 프로세서 (Low Complexity Channel Preprocessor for Multiple Antenna Communication Systems)

  • 황유선;장수현;한철희;최성남;정윤호
    • 한국항행학회논문지
    • /
    • 제15권2호
    • /
    • pp.213-220
    • /
    • 2011
  • 본 논문에서는 최대 4개의 송 수신 안테나를 지원 가능한 $4{\times}4$ 다중 안테나 (MIMO) 시스템에서 채널의 dimension을 축소함으로써 복잡도를 줄일 수 있는 저복잡도 채널 전처리 프로세서를 제안하고 구현한다. 제안된 채널 전처리 프로세서는 채널의 일부분을 간섭신호라 간주하고 제거하는 GIS 행렬을 구하는 데 있어서 행렬의 역행렬과 행렬간의 승산 연산을 줄이기 위해, QR 분해 기법을 이용하여 $4{\times}4$ MIMO 채널 전처리 프로세서의 복잡도를 최소화한다. 또한, 로그 수체계를 이용하여 행렬간의 복소수 승산을 가산으로, QR 분해 기법의 사용으로 인해 생기는 나눗셈 연산을 감산 연산으로 대체함으로써 연산기의 단순화를 진행하고, 이를 통해 하드웨어 복잡도를 크게 감소시킨다. 제안된 채널 전처리 프로세서는 하드웨어 설계 언어 (HDL)을 이용하여 설계되었고, $0.13{\mu}m$ CMOS 규격 셀 라이브러리를 사용하여 합성되었다. 그 결과 기존의 2의 보수 수체계를 이용한 채널 전처리 프로세서의 설계 구조 대비 로그 수체계를 이용한 제안된 채널 전처리 프로세서의 하드웨어 복잡도가 20.2% 가량 감소됨을 확인하였다.

무요소법의 수치적 안정성 개선을 위한 적분기법 연구 (A Study on Integraion Method for Improvement of Numerical Stability of Meshfree Method)

  • 강재원;강다훈;조진연;김정호
    • 한국항공우주학회지
    • /
    • 제46권3호
    • /
    • pp.210-218
    • /
    • 2018
  • 항공기와 같은 복잡한 구조물의 유한요소해석을 위해 자동요소망을 생성하면 일반적으로 삼각형 요소가 많이 생성되게 된다. 하지만 삼각형 요소는 사각형 요소에 비해 정확도가 떨어지므로 신뢰성 있는 해를 도출하기 어렵다. 이와 같은 문제는 배경셀 적분을 이용한 무요소법(Meshfree Method)을 통해 개선할 수 있으나 이 또한 적분점의 과다사용, 적분영역의 비효율성 등의 문제가 발생하게 된다. 이를 개선하기 위해 절점 기준으로 적분영역을 설정하여 적분을 수행하는 방법이 제안되었지만 비압축성 문제의 경우 해의 진동현상이 일어나는 등 수치 정확도가 떨어지게 된다. 따라서 본 연구에서는 적분영역을 절점영역이 아닌 요소영역으로 설정하는 수정된 무요소법을 통해 요소의 형태에 따른 정확도 저하가 발생되지 않고 기존의 무요소법에서 발생되는 수치 불안정성 등을 개선하였다. 2차원 예제를 통해 수정된 무요소법의 효용성을 검증하였다.

An Investigation on Gridline Edges in Screen-Printed Crystalline Silicon Solar Cells

  • Kim, Seongtak;Park, Sungeun;Kim, Young Do;Kim, Hyunho;Bae, Soohyun;Park, Hyomin;Lee, Hae-Seok;Kim, Donghwan
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.490.2-490.2
    • /
    • 2014
  • Since the general solar cells accept sun light at the front side, excluding the electrode area, electrons move from the emitter to the front electrode and start to collect at the grid edge. Thus the edge of gridline can be important for electrical properties of screen-printed silicon solar cells. In this study, the improvement of electrical properties in screen-printed crystalline silicon solar cells by contact treatment of grid edge was investigated. The samples with $60{\Omega}/{\square}$ and $70{\Omega}/{\square}$ emitter were prepared. After front side of samples was deposited by SiNx commercial Ag paste and Al paste were printed at front side and rear side respectively. Each sample was co-fired between $670^{\circ}C$ and $780^{\circ}C$ in the rapid thermal processing (RTP). After the firing process, the cells were dipped in 2.5% hydrofluoric acid (HF) at room temperature for various times under 60 seconds and then rinsed in deionized water. (This is called "contact treatment") After dipping in HF for a certain period, the samples from each firing condition were compared by measurement. Cell performances were measured by Suns-Voc, solar simulator, the transfer length method and a field emission scanning electron microscope. According to HF treatment, once the thin glass layer at the grid edge was etched, the current transport was changed from tunneling via Ag colloids in the glass layer to direct transport via Ag colloids between the Ag bulk and the emitter. Thus, the transfer length as well as the specific contact resistance decreased. For more details a model of the current path was proposed to explain the effect of HF treatment at the edge of the Ag grid. It is expected that HF treatment may help to improve the contact of high sheet-resistance emitter as well as the contact of a high specific contact resistance.

  • PDF

생물계면활성제 생성 세균 Pseudomonas sp. HN37의 특성 (Characteristics of Biosurfactant Producing Pseudomonas sp. HN37)

  • 정다희;장동호;김영은;정미랑;한규웅;김형배;박경량
    • 미생물학회지
    • /
    • 제50권1호
    • /
    • pp.33-39
    • /
    • 2014
  • 대전일원의 유류오염 지역의 토양으로부터 원유를 단일 탄소원으로 이용하는 총 144균주를 순수분리 하였고, 이중 유화능과 성장률 그리고 표면장력활성이 가장 우수한 한 균주를 최종 선별하여 형태 및 생리 생화학적 특성을 조사하고 16S rRNA 염기서열을 분석을 통해 Pseudomonas sp. HN37이라 명명하였다. 최종 선별된 Pseudomonas sp. HN37는 여러 종류의 지방족 탄화수소와 3,5-dinitrosalicylic acid와 2,4-dichlorophooxyacetic acid를 단일 탄소원으로 이용하여 성장하였다. 그리고 이 균주는 암피실린과 클로람페니콜 항생제와 Ba, Cr, Li, Mn 중금속에 대해 강한 내성을 갖고 있었고, pH 6.0-9.0과 $30^{\circ}C$에서 성장능과 표면장력활성, 그리고 유화능이 가장 우수한 것으로 확인되었다. 또 Pseudomonas sp. HN37는 1% (v/v) 원유 농도와 1%(w/v) NaCl에서 최대 유화능과 표면장력활성을 나타내었고, LB배지에서 배양 15시간 후에 표면장력활성이 62 dyne/cm에서 27 dyne/cm까지 감소하였다.

플래시 메모리상에서 시스템 소프트웨어의 효율적인 버퍼 페이지 교체 기법 (An Efficient Buffer Page Replacement Strategy for System Software on Flash Memory)

  • 박종민;박동주
    • 한국정보과학회논문지:데이타베이스
    • /
    • 제34권2호
    • /
    • pp.133-140
    • /
    • 2007
  • 플래시 메모리는 오늘날 다양한 형태로 우리 생활의 일부를 차지하고 있다. 이동식 저장매체, 유비쿼터스 컴퓨팅 환경과 휴대전화기, MP3플레이어, 개인정보단말기(PDA) 등의 모바일 제품 등에 광범위하게 사용되고 있다. 이처럼 많은 분야에서 사용되는 주된 이유는 플래시 메모리가 저전력, 비휘발성, 고성능, 물리적 안정성, 휴대성 등의 장점을 갖기 때문이다. 더불어 최근에는 기가바이트급 플래시 메모리도 개발되어 하드디스크의 자리를 대체할 수 있는 상황에 이르렀다. 하지만, 플래시 메모리는 하드디스크와 달리 이미 데이타가 기록된 섹터에 대해 덮어쓰기가 되지 않는다는 특성을 갖고 있다. 데이타를 덮어쓰기 위해서는 해당 섹터가 포함된 블록을 지우고(소거) 쓰기 작업을 수행해야 한다. 이로 인해 플래시 메모리의 데이타 읽기/쓰기/소거에 비용이 하드 디스크와 같이 동일한 것이 아니라 각각 다르다[1][5][6]. 이러한 특성이 고려되지 않은 기존의 OS, DBMS 등과 같은 시스템 소프트웨어에서 사용되는 교체 기법은 플래시 메모리 상에서 비효율성을 가질 수 있다. 그러므로 플래시 메모리상에서는 플래시 메모리의 특성을 고려한 효율적인 버퍼 교체 기법이 필요하다. 본 논문에서는 플래시 메모리의 특성을 고려한 버퍼 페이지 교체기법을 제안하며, 제안된 기법과 기존 기법들과의 성능 평가를 수행한다. 지프분포와 실제 워크로드를 사용한 성능평가는 플래시 메모리의 특성을 고려한 버퍼 페이지 교체 기법의 필요성을 입증한다.

중소기업 M&A 의사결정 과정에 관한 연구 (Case Study on Decision-Making Process for M&A in Small and Medium Companies)

  • 정한석;문재승
    • 유통과학연구
    • /
    • 제13권10호
    • /
    • pp.65-72
    • /
    • 2015
  • Purpose - A rapidly changing business environment places great demands on small and medium-sized enterprises (SMEs). These SMEs need to find strategic alternatives for continued growth and, ultimately, survival. Thus, mergers and acquisitions (M&A) are deemed an acceptable solution. Research to date has dealt with M&A in major organizations and focused on post merger integration (PMI). Our study focuses on SMEs, as they are relatively new and unknown to the public. Therefore, this study highlights successful M&A and decision making for SMEs through a case study analysis. Research design, data, and methodology - For this study, we examined an M&A case between company S, which produces cell phone parts, and company P, which produces SSD cases. We reviewed theories and previous studies in M&A literature. We comprehensively examined the decision-making procedure at each M&A stage, describing the situation of the buying company and the selling company from the period of the M&A announcement through deal completion. In addition, we conducted interviews with both companies. The data regarding this case study were collected through interviews with managers of both companies who actively participated in the M&A process. When necessary, we asked them about additional relevant information during the interviews. Results - The result of the M&A between company S and company P was deemed acceptable with the exception of the long negotiation period. However, company S was not able to prepare for PMI after the acquisition due to a controversy over acquisition values. Moreover, the employees of the newly formed company, especially those who came from company P, complained about the M&A and attempted to leave. Thus, implications for successful M&As of SMEs are as follows: First, the procedural compliance of the M&A is needed. Second, support is needed from the CEO for the working group, rather than excessive intervention during due diligence. Third, the right, talented members of the organization should be part of the process of the M&A. Fourth, the use of various types of outside expert or business consultants is needed. Fifth, the strategic intervention by Human Resource managers is required. Last, sharing M&A information among employees is important as information dissemination will help employees be more receptive to such a change. However, this study has several limitations as a single case study; more varied SME M&A case studies are needed in order to generalize the results of the study. Conclusions - Most of the research dealing with M&As has focused on major companies and PMI and neglected SMEs. Thus, our study focuses on SMEs and the decision-making procedures for M&A. This study has significantly contributed to the literature in this area and has provided practical information around the implications of sound decision-making during M&As. Specifically, the results of the study contribute to the need for research on M&A among SMEs, which to date has often been neglected as a topic of choice.

여수연안 및 동중국해의 세균상 1. 일반 세균, Vibrio spp., 대장균군 균수에 따른 수평 분포 (Bacterial Flora of East China Sea and Yosu Coastal Sea Areas 1. Horizontal Distributions According to Number of Bacteria, Vibrio spp. and Coliform Group)

  • 정규진;신석우
    • 한국수산과학회지
    • /
    • 제29권1호
    • /
    • pp.9-16
    • /
    • 1996
  • 1992년 8월 6일부터 8월 14일까지에 걸쳐 조사한 동중국해 및 여수연안의 세균 flora, Vibrio spp., 대장균군에 대한 양적인 수평분포를 조사하여 미생물 생태계 해석을 위한 자료를 얻고자 실험한 결과를 요약하면 다음과 같다. 1. 동중국해의 염분농도는 $24.64\~33.78\%_{\circ}$였고, 외양으로 갈수록 낮아졌다. 2. 수온은 $22.53\~29.18^{\circ}C$였고, 연안에 비해 외양으로 갈수록 높게 나타났다. 3. 여수 연안 해수중의 일반세균수는 $1.0\times10^2\~3.0\times10^4/ml$, Vibrio spp.는 $0.2\times10\~9.0\times10^3/ml$, 대장균군은 $0.3\times10\~3.0\times10^3/ml$로서 연안에서 멀어질수록 균량은 감소하였다. 4. 동중국해 해수중의 일반세균수는 $0.4\times10\~2.0\times10^3/ml$, vibrio spp.는 $0.8\times10\~3.0\times10/ml$, 대장균군은 $0.9\times10\~l.3\times10/ml$였고, 외양으로 갈수록 일반세균은 적게 나타났으며, Vibrio spp.와 대장균군은 나타나지 않았다. 5. 동중국해에서 Vibrio spp.와 대장균군의 출현한 곳은 중국연안에 가까운 해역이였다.

  • PDF

멜라토닌이 생쥐 소낭 세포 재생과 아포토시스에 미치는 영향에 대한 연구 (The Effect of Melatonin on Mouse Jejunal Crypt Cell Survival and Apoptosis)

  • 강진오;하은영;백형환;조용호;홍성언
    • Radiation Oncology Journal
    • /
    • 제18권1호
    • /
    • pp.60-67
    • /
    • 2000
  • 목적 :멜라토닌의 방사선 증개 방어 효과와 기전을 밝혀 방사선 치료제로서의 기초 자료를 제공하고자 하였다. 방법 : 168 마리의 생쥐를 방사선량과 멜라토닌 투약 여부에 따라 28개 군으로 나누어 실험하였다 방사선량은 0.8, 10, 12, 14, 16, 18 Gy를 조사하고 소낭의 생존 곡선을 보기 위하여 Withers와 티kind의 방법을 이용한 microcoiony survival assay를 시행하였고 아포토시스를 보기 위하여 TUNEL assay를 시행하였다. 결과 : 멜라토닌의 방사선 장애 방어 효과는 전 선량군에서 확인되었고 특히 고선량군에서 방어 효과가 많은 차이를 보였다. Apoptosis index는 8 Gy 방사선 조사 후 대조군에서 18.4$\%$, 멜라토닌 투여군에서 16.5$\%$이었고 18 Gy 방사선 조사 후 대조군에서 17.2$\%$, 멜라토닌 투여군에서 15.4$\%$로 나타나 통계적인 차이를 보이지 않았다. 결론: 멜라토닌은 생쥐 소장의 소낭 세포에서 방사선 장애 방어 효과를 나타냈으나 이의 기전은 아포토시스 억제 효과와는 관련이 없는 것으로 판단하였다.

  • PDF

토양수분의 과, 부족이 연초의 생장과 증발산량에 미치는 영향 (EFFECT OF SOIL mOISTURE CONDITiON ON THE GROWTH AND EVAPOTRANSPIRATION OF THE TOBACCO PLANT)

  • 홍순달;이윤환;김재정;조성진
    • 한국연초학회지
    • /
    • 제7권1호
    • /
    • pp.15-23
    • /
    • 1985
  • Growth response and evapotranspiration of tobacco as to each soil moisture condition treated with different height of ground water table such as 30cm, 100cm, 170cm, and 230cm were investigated. The results obtained were as follows; 1. Soil water potential in the rhizosphere (25cm depth from surface) treated with ground water table (G.W.T) of 230 cm was less than -6.5 bar at 60 days after transplanting. 2. Dry weight of leaves per plant was the highest in the pot treated with 100 cm G.W.T and was the lowest in the pot treated with 230 cm G.W.T.. Leaves/Stem ratio of dry weight was the lowest in the pot treated with 230 cm G.W.T. This would show that extension of leaves as compared with elongation of stem was suppressed. .3. In the roster stress condition of 230 cm G.W.T., extension of leaves was continued until the latter growth stage, Relative growth rate of leaf area per plant of the pot with 30 cm G.W.T. was the highest through all growth period after fixation of G.W.7., but owing to lower density of leaf, the dry weight of leaves per plant was less rather than that of the pot with 170 cm G.W.T. at 64 days after transplanting. 4. The highest evapotranspiration per plant per day was shown at the 45th day after transplanting in the pots with 30cm and 100cm G.W.T. and at 60 days in the pots with 170cm and 230cm G.W.T respectively. 5. In the soil moisture conditions with 30cm and 100cm G.W.T., evapotranspiration per plant per hour was much higher in the daytime that at night as well as in clear day than in rain-cloudy day owing to loner relative humidity , but in the water stress condition with 230 cm G.W.T., that was much lower. 6. Total evapotranspiration per plant during the whole growing period of 64 days was in order of 30cm > 100 cm > 170 cm > 230 cm G.W.T.. Total evapotranspiration for 34 days after fixation of G.W.T was much higher at night than in the daytime in case of water stress conditions i.e 170cm and 230cm G.W.T. but in normal condition of the pots with 30cm and 100cm G.W.T. that was much higher in the daytime than at night. 7. Leaf water potential of the 3rd and 6th leaf from top at 64 days after transplanting was in order of 100cm > 30 cm > 170cm > 230cm G.W.T. The reason why leaf water potential in the pot with 30cm was less than that in the pot with 100cm G.W.T. would be the abnormal turgidity with low density of cell substrates by the excess water absorption in the pot with 30cm G.W.T..

  • PDF

마우스에서 2,4-Dinitrochlorobenzene을 이용한 아토피성 피부염 발현 관련 면역지표치 분석 (2,4-Dinitrochlorobenzene-induced Atopic Dermatitis Like Immune Alteration in Mice)

  • 이승혜;백성진;김형아;허용
    • Toxicological Research
    • /
    • 제22권4호
    • /
    • pp.357-364
    • /
    • 2006
  • This study was undertaken to develop a reliable mice model demonstrating similar immunologic phenomena as human atopic dermatitis characterized with predominance of type-2 immune response. BALB/C mice and NC/Nga mice were sensitized twice with $100{\mu}l$ of 1% 2,4-dinitrochlorobenzene (DNCB) or vehicle (acetone : olive oil=4:1 mixture) in a week and challenged twice with $100{\mu}l$ of 0.2% DNCB or the vehicle at the following week. Mice were sacrificed at 19 days following the second DNCB or vehicle challenge for NC/Nga mice and at 28 days following the second DNCB or vehicle challenge for BALB/c mice. Upregulation of plasma 1gE, a hallmark of atopic dermatitis occurrence, was evident in the plasma obtained 4 day after the second DNCB challenge from BALB/c mice (approximately 4-fold) and NC/Nga mice (approximately 6-fold) treated with DNCB in comparison with that of the vehicle treated-control mice, and remain higher $3{\sim}4$ week after the second challenge. Ratio of plasma IgG1 versus IgG2a concentration was significantly higher in the mice treated with DNCB than the control mice, which also implies the skewed type-2 reactivity in vivo. Ratio of interleukin-4 versus interferon gamma produced in the splenic T cell culture supernatants was approximately 3-fold higher in the both strains of mice treated with DNCB than their control mice, respectively. The DNCB-treated mice demonstrated atopic dermatitis-like skin legions characterized with erythma, scaling, and hemorrhage, which was not observed with the control mice. Scratching on face or dorsal area was significantly more frequent (approximately 25-fold) in the DNCB-treated mice than the control at next day of the second DNCB challenge, and scratching frequency remains higher (approximately 4-fold) in the mice treated with DNCB than the control at 14 day following the second DNCB challenge. Overall, the mice model developed through sensitization and challenge with DNCB may be useful for research on atopic dermatitis and development of treatment materials for atopic dermatitis.