• Microbiology and Biotechnology Letters
• /
• v.9 no.2
• /
• pp.59-64
• /
• 1981

The cultural conditions and the intra cellular accumulation of cadmium was studied using a cadmium tolerant yeast strain B-7 which had been isolated from activated sludge collected from a zinc mining area. The organism was able to grow in a medium containing 3,000 $\mu\textrm{g}$/$m\ell$ of cadmium-ion. (C $d^{++}$) Optimum conditions for the growth of the organisms were 20~22$^{\circ}C$ and pH 5.0~8.0 under aerobic condition. The maximum cadmium accumulation was observed when the organism was grown at pH 6.0. The growth of B-7 was not affected by the addition of a silicone-based antifoamer, which stimulated the intra cellular accumulation of cadmium. The intra cellular cadmium accumulation started after the cell ceased to grow. One gram of cells accumulated 34.17mg of cadmium when the organism was grown in a medium containing 500 $\mu\textrm{g}$/$m\ell$ of cadmium and 0.2%, v/v silicone-based antifoamer at 28$^{\circ}C$ for 48 hours with shaking. About 73 % of the accumulated heavy metal by the organism was found in the cytoplasm.m.

• Microbiology and Biotechnology Letters
• /
• v.29 no.3
• /
• pp.142-148
• /
• 2001

An indigenous antagonistic bacterium Bacillus sp. 7079 was isolated from a local soil sampled at Kyongju area in Korea . The strain has strong antagonistic ability which was originated from multifunctional mechanisms of chitinase and antibiotic and is a powerful antagonistic biocontrol agent against red-pepper rotting fungus Phytophthora capsici and Wilt fungus Fusarium oxysporum. The chitinase might degrade the cell wasll for Fusarium species. The selected Bacilus sp. 7079 was identified as a Bacillus amyloliquefaciens 7079. The maximal production of the chitinase from B, amyloliquefaciens 7079 were obtained in chitin-yeast extract medium containing 0.7%, $K_2$$HPO_4$, $0.2KH_2$$PO_4$, 0.1% ($NH_4$)$_2$$SO_4$, 0.05% sodium cirate, 0.01% $MgSO_4$$7H_2$O, 0.1% yeast extract and 0.1% colloidal chitin after cultivation of 3 days at pH 7.0 and $30^{\circ}C$. The best carbon and nitrogen sources for the production of the chitinase from B amyloliquefaciens 7079 were determined to be 0.1% colloi- dal chitin and 0.15% proteose peptone NO 3 respectively, The antagonistic activity of B amyloliquefaciens 7079 was confirmed using P. capsici by in vivo pot test with red-pepper plant.

• Ocean and Polar Research
• /
• v.27 no.3
• /
• pp.265-276
• /
• 2005

In order to grasp the structure and dynamics of phytoplankton communities, chlorophyll-a (Chl-a) and cell abundance were measured at 20 stations during the period from August 9 to August 21, 2003 in the southeastern Barents Sea on surface and subsurface chlorophyll maximum depth (SCM). Surface temperatures were varied from minimum $-0.7^{\circ}C(st. 18)$ to maximum $10.4^{\circ}C(st.1)$. Salinities were varied from minimum 29.9 psu(st. 18) to maximum 35.8 psu(st.2). The maximum nutrient(phosphate, nitrate, silicate) concentrations were $0.12{\mu}M,\;0.11{\mu}M,\;7.53{\mu}M$ and minimum concentrations were $0.01{\mu}M,\;0.03{\mu}M,\;1.43{\mu}M$, respectively. On SCM physical environmental factor were almost similar. Chl-a concentrations ranged from 0.23 to $2.13{\mu}g\;chi-a\;l^{-1}$ at SCM. Nano- and pico phytoplankton were the important contributors for increase of the Chl-a. It was about seven times difference between highest concentration to lowest. Phytoplankton communities were composed of diatoms, dinoflagellates, cryptophyceae, silicoflagellate, and prymnesiophyceae showing 37 taxa at surface and 38 taxa at SCM. Picophytoplankton was the most dominant in all stations and all layers, but the second groups were 2 and/or 3 taxa. Phytoplankton abundance ranged from minimum $4.3{\times}10^5\;cells\;l^{-1}$ (st. 20) to maximum $2.4{\times}10^6\;cells\;l^{\-1}$. (st. 17) at surface water. As a result, phytoplankton might be controlled by physical factors such as North Atlantic ocean currents and northern melt water among environmental factors in Barents Set h addition the dominant species were nano- and pico phytoplankton such as Phaeocystis, Cryptomonas and Dinobryon in the study area.

• Korean Journal of Microbiology
• /
• v.31 no.2
• /
• pp.105-112
• /
• 1993

Plesiomonas shigelloides distributed in the aquatic systems was isolated and identified in this study and compared with the c1inica] isolates in view of their physiological characteristics, Biochemica] charactristics of the isolates of P. shigelloides one sample taken from Gupo and two samples taken from Mu]gum, were studied. However, none was isolated in Haeundae, Dadaepo, Kangdong and Nakdong estuary. The isolated bacteria had an optimum growth condition in peptone water of $25~35^{\circ}C$, pH 7.5-8.0 and 1% NaCI concentration. The cell grew most properly on the selective enrichment media which were made from adding inositol to peptone water. DNase was s]owly produced and the results were different from those of other studies. The components of the fatty acid were 3% of 3-hydroxy]ated fatty acid containing $C_{12}~C_{18}$. 0-10% cyclopropane ($C_{17:0}$), 25~30% hexadecanoic acid ($C_{16:0}$), 32~43% hexadecenoic acid ($C_{16:1}$), 1~2% octadecanoic acid ($C_{16:0}$), and 9~14% octadecenoic acid ($C_{18:1}$). Bacterio]ogica] characteristics, susceptibility of antibiotics, and the components of fatty acid of the c1inica] isolates were similar to those of the strains isolated from the aquatic systems. The strains isolated from c1inica] sources degraded lactose more fast than those isolated from the aquatic systems. There existed resistant bacteria to chlorampenicol in the strains from patients, but there were no resistant bacteria in the strains from the aquatic systems. The components of fatty acid of the clinical isolates were 0~2% $C_{17:0 cyclo}$ and 2~3% $C_{18:0}$, but those of the strains from the aquatic systems were 2~10% and 1~2%, respectvely, which showed the quantitative difference between both components.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.1
• /
• pp.47-55
• /
• 2017

The technology for hydrothermal reaction of organic waste is one of the promising process to improve energy efficiency of biomass waste recycling system since moisture contents of treated biomass could be reduced at 40% or less than by dehydration processes. For these reasons, many parts of the world are interested in hydrothermal reaction of organic waste. In this paper, drying performances were evaluated with and without hydrothermal reaction of organic wastes which are sewage sludge and food wastes. For the hydrothermal reaction, organic wastes were treated at $200^{\circ}C$ for 1hr. Drying time of treated organic waste by hydrothermal reaction was reduced. In case of food waste drying at $100^{\circ}C$, drying time of treated wasted was reduced more 52.9% than non-treated. Hence, drying performances of sewage sludge and food wastes should be improved by hydrothermal reaction. Drying rates of treated wastes were considerably increased at preheat period of drying characteristic curve as followings; at $80^{\circ}C$ sludge as 148%, $100^{\circ}C$ sewage sludge as 151%, $80^{\circ}C$ food waste as 209%, $100^{\circ}C$ food waste as 366%. It means the surface area of treated wastes could be increased with destruction of cell membrane by hydrothermal reaction. However, the designer and operator of drying process should be careful, since enhanced drying rate cause the extension the decreasing drying period.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1C
• /
• pp.29-38
• /
• 2011

The smaller diameter cone penetrometer has been widely used to estimate the characteristics of local area due to high vertical resolution. The half-bridge cirucits have been adopted to measure the mechnical strength of soil through the smaller diameter cone penetrometer due to the limitation of the areas for configuring the full-bridge circuit. The half-bridge circuit, however, is known as being easily affected to the temperature variation. The objective of this study suggests the temperature-compensated method in mini-cones. The diameter and length of the mini-cone is designed to 15mm and 56mm. The load cell of the mini-cone is extended about 54mm on the behind of the mini-cone to reflect the only temperature variation. The full-bridge circuit is installed to measure the temperature-compensated values in the mini-cone and the half-bridge circuit is also organized to compare the temperature compensated values with uncompensated values. The seasonal variation tests are performed to define the effect of temperature variation under summer and winter temperature condition. The densification tests are also carried out to investigate temperature effects during penetration. The measured mechanical resistances with temperature-compensated method show more reliable and reasonable values than those measured by thermal uncompensated system. This study suggests that the temperature-compensated method of the mini-cone may be a useful technique to obtain the more reliable resistances with minimizing the temperature effect.

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.552-560
• /
• 2010

$GA_{4+7}$+BA, a plant growth regulator for induction of feathering in young apple tree and increasing fruit size, was applied by various methods on 'Gala'/M.9 apple trees in high density orchard for 4 years to investigate its effect on fruit and shoot growth. $GA_{4+7}$+BA($80-300mg{\cdot}L^{-1}$) increased fruit length, fruit weight, and L/D ratio regardless of application methods, but it did not affect soluble solid content, acidity, leaf area, and chlorophyll. Seed number was not affected by $GA_{4+7}$+BA application, however, more immature seeds was observed in treated 'Gala' fruit. Shoot growth was increased when spraying $GA_{4+7}$+BA at tree crown but not affected when spraying at fruit directly. More significant fruit growth was observed when $GA_{4+7}$+BA was applied on the fruits between late of May and early of June when fruit cell division ended; however, high concentration of $GA_{4+7}$+BA resulted in lower fruit storability because of lower firmness. Hence, more attention should be paid when applying high concentration of $GA_{4+7}$+BA to small sized fruit cultivars like 'Gala'.

• Journal of Chest Surgery
• /
• v.49 no.sup1
• /
• pp.37-43
• /
• 2016

Background: While demand for cardiovascular surgery is expected to increase gradually along with the rapid increase in cardiovascular diseases with respect to the aging population, the supply of thoracic and cardiovascular surgeons has been continuously decreasing over the past 10 years. Consequently, this study aims to achieve guidance in establishing health care policy by analyzing the supply and demand for cardiovascular surgeries in the medical service area of Korea. Methods: After investigating the actual number of cardiovascular surgeries performed using the National Health Insurance claim data of the Health Insurance Review and Assessment Service, as well as drawing from national statistics concerning the elderly population aged 65 and over, this study estimated the number of future cardiovascular surgeries by using a cell-based model. To be able to analyze the supply and demand of surgeons, the recent status of new surgeons specializing in thoracic and cardiovascular surgeries and the ratio of their subspecialties in cardiovascular surgeries were investigated. Then, while taking three different scenarios into account, the number of cardiovascular surgeons expected be working in 5-year periods was projected. Results: The number of cardiovascular surgeries, which was recorded at 10,581 cases in 2014, is predicted to increase consistently to reach a demand of 15,501 cases in 2040-an increase of 46.5%. There was a total of 245 cardiovascular surgeons at work in 2014. Looking at 5 year spans in the future, the number of surgeons expected to be supplied in 2040 is 184, to retire is 249, and expected to be working is 309-an increase of -24.9%, 1.6%, and 26.1%, respectively compared to those in 2014. This forecasts a demand-supply imbalance in every scenario. Conclusion: Cardiovascular surgeons are the most central resource in the medical service of highly specialized cardiovascular surgeries, and fostering the surgeons requires much time, effort, and resources; therefore, by analyzing the various factors affecting the supply of cardiovascular surgeons, an active intervention of policies can be prescribed for the areas that have failed to meet the appropriate market distributions.

• Microbiology and Biotechnology Letters
• /
• v.43 no.2
• /
• pp.150-157
• /
• 2015

This study was intended to evaluate the anti-atopic effect of Sargassum fulvellum water extract (SFWE). Atopic dermatitis (AD) was induced in BALB/c mice by spreading 2,4-dinitrochlorobenzene (DNCB) to the dorsal skin area. The production of IL-4 and total IgE of the SFWE treated group was significantly less than the DNCB only group. On the other hand, the production of the IFN-γ of SFWE treated group was greater than that of the DNCB only group. In addition, SFWE alleviated the AD symptoms when compared to the DNCB only group and reduced the epidermal thickness and the number of mast cells in histological analysis. In conclusion, these results suggest that the application of SFWE has an anti-atopic activity through the modulation of IL-4 and IFN-γ cytokines, and the total IgE in DNCB-induced BALB/c mice. Therefore, SFWE can be utilized with atopic disease therapies.

• Journal of the Korean association of regional geographers
• /
• v.12 no.5
• /
• pp.614-630
• /
• 2006

Improved estimates of populations at risk for quick and effective response to natural and man-made disasters require spatial disaggregation of zonal population data because of the spatial mismatch problem in areal units between census and impact zones. This paper implements a dasymetric surface model to facilitate spatial disaggregation of the population of a census block group into populations associated with each constituent pixel and evaluates the performance of the surface-based spatial disaggregation model visually and statistically. The surface-based spatial disaggregation model employed geographic information systems (GIS) to enable dasymetric interpolation to be guided by satellite-derived land use and land cover data as additional information about the geographic distributor of population. In the spatial disaggregation, percent cover based empirical sampling and areal weighting techniques were used to objectively determine dasymetric weights for each grid cell. The dasymetric population surface for the Atlanta metropolitan area was generated by the surface-based spatial disaggregation model. The accuracy of the dasymetric population surface was tested on census counts using the root mean square error (RMSE) and an adjusted RMSE. The errors related to each census track and block group were also visualized by percent error maps. Results indicate that the dasymetric population surface provides high-precision estimates of populations as well as the detailed spatial distribution of population within census block groups. The results also demonstrate that the population surface largely tends to overestimate or underestimate population for both the rural and forested and the urban core areas.