• Applied Chemistry for Engineering
• /
• v.21 no.4
• /
• pp.391-395
• /
• 2010

This study presents the effect of CO in flue gas on the $H_2$ SCR by Pt/$TiO_2$ catalyst. Coexisting CO which has characteristics of competitive adsorption with $H_2$ as a reductant on the active sites showed the decrease of catalytic activity. Competitive adsorption with NO, CO and $H_2$ also caused the reduction of activity and $H_2$, CO slip simultaneously. With increasing the inlet CO concentration, such phenomenon became more pronounced. Adding $PdO_2$ and $CeO_2$ on the catalyst to avoid the inhibition by coexisting CO, $CeO_2$ added catalyst exhibited the durability against CO which fed 100 ppm under.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.58-62
• /
• 1999

We fabricated a new hairpin type HTS 2-pole microstrip Bandpass filter to operate at 5.8GHz. The fabrication method was pulsed laser deposition and YBCO films were deposited on ${\alpha}$-A1$_2O_3$ substrates with a CeO$_2$ thin layer as a buffer layer. We developed a new style hairpin type filter by using interdigitide innerpole. Compared to the saute size regular hairpin type filters, our filter had a lower center frequency, bandwidth and loss by an amount of 14.5%, 29.6%, 0.5488dB, respectively. The size of the filters were 13.7${\times}$3.3mm. We did simulations on the several types of band pass filters by using HFSS and serenade. We measured growth rate and Tc of YBCO films grown on CeO$_2$/ ${\alpha}$-A1$_2O_3$ substrates which were rotated while growing films.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.287-290
• /
• 2003

For microwave device applications, c-axis oriented high temperature superconducting YBa$_2$Cu$_3$O$_{7-{\delta}}$ (HTS-YBCO) epitaxial thin films on the r-cut sapphire substrate(Al$_2$O$_3$) were prepared. In order to reduce the lattice mismatch with a substrate and to enhance the crystallity of HTS thin films, CeO$_2$ buffer layer on the r-cut sapphire substrate was grown by the RF-magnetron sputtering. The YBCO films on the CeO$_2$ buffer layer were deposited using the pulsed-laser deposition (PLD) method. These HTS YBCO /CeO$_2$/Al$_2$O$_3$ multilayer thin films(30 $\times$ 30 mm$^2$) routinely exhibited a critical temperature(T$_{c}$) of 89 K from the R-T measurement. Using HTS YBCO/CeO$_2$ /Al$_2$O$_3$ multilayer thin film. We fabricated and characterized the microwave passive devices (planar type filters) with cryopack-age such as the coupled -line type low-pass filter (LPF) and the open-loop meander type bandpass filter (BPF).filter (BPF).).

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.620-626
• /
• 2019

In this study, the effects of the structural properties of the catalyst on CO oxidation reaction by controlling the $Cu/CeO_2$ catalyst amount and calcination temperature were studied, and also the CO conversion rate of the catalyst at the temperature range of $100{\sim}300^{\circ}C$ was evaluated. XRD, Raman, BET, $H_2-TPR$, and XPS analyses were performed to confirm the effect of changes in the structural properties on the chemical properties of the catalyst. The result confirmed that a substitution bond between Cu and Ce was formed and a lot of Cu and Ce bonds were formed when the catalyst carrying 5 wt.%. Of Cu was calcined at $400^{\circ}C$. The Cu-Ce binding was confirmed by peak shifts in Raman analysis and also peaks appeared in $H_2-TPR$. In addition, the balance state analysis demonstrated that a lot of surface labile oxygen molecules are formed, which can be more easily contributed to the reaction with $Ce^{3+}$ species known to form a substitution bond easily. It was found that CO conversion rate of the catalyst used in this study was close to 100% at $150^{\circ}C$.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.181-185
• /
• 1998

모의 혼합산화물인 (U,Ce)O$_2$ 에 dopant 인 Li$_2$O 와 SiO$_2$ 를 첨가한 소결체의 압축크립변형거동을 수소분위기, 온도 1773K 에서 응력(10-120MPa)을 변화시켜 조사하였다. Dopant 를 첨가할 경우 정상상태 크립변형속도는 첨가하지 않은 경우보다 크게 증가하는 것으로 나타났다. 증가한 원인으로는 Li$_2$O 를 첨가한 경우 우라늄 확산계수의 증가에 기인되며, SiO$_2$ 를 첨가한 경우에는 SiO$_2$ 가 glassy phase 로 입계에 위치하여 입계이동이 용이하게 되어 정상상태 크립변형속도가 증가한 것으로 사료된다. 또한 저응력구간에서 (U,Ce)O$_2$ 의 크립활성화에너지는 109.6 kcal/mol 로 $UO_2$ 의 크립활성화에너지(94.2kca1/mol)보다 더 크게 나타났다.

• Journal of Hydrogen and New Energy
• /
• v.18 no.2
• /
• pp.116-123
• /
• 2007

[ $La_{0.5}Ce_{0.5}Co_{1-x}Cu_xO_{3-{\alpha}}$ ](X=0, 0.1, 0.3, 0.5) perovskites were prepared by coprecipitation method at pH 7 or pH 11 and its catalytic activity of selective CO oxidation was investigated. The characteristics of these catalysts were analyzed by $N_2$ adsorption, X-ray diffraction(XRD), SEM, $O_2$-temperature programmed desorption(TPD). The pH value at a preparation step made effect on particle morphology. The smaller particle was obtained with a condition of pH 7. The better catalytic activity was observed using catalysts prepared at pH 7 than pH 11. The maximum CO conversion of 98% was observed over $La_{0.5}Ce_{0.5}Co_{0.7}Cu_{0.3}O_{3-{\alpha}}$ at $320^{\circ}C$. Below $200^{\circ}C$, the most active catalyst was $La_{0.5}Ce_{0.5}Co_{0.9}Cu_{0.1}O_{3-{\alpha}}$, of which conversion was 92% at $200^{\circ}C$. By the substitution of Cu, the evolution of ${\alpha}$-oxygen was remarkably enhanced regardless of pH value at preparation step according to $O_2$-TPD. Among the different ${\alpha}$-oxygen species, the oxygen species evolved between $400^{\circ}C$ and $500^{\circ}C$, gave the better catalytic performance for selective CO oxidation including $La_{0.5}Ce_{0.5}CoO_3$ in which Cu was absent.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.442-445
• /
• 2001

In this study, microstructural and dielectric properties of $Pb_{0.83}(La_{0.2}Ce_{0.8})_{0.08}TiO_3$(PCT) ceramics as a function of $MnO_2$ addition were investigated for 30MHz ceramic resonator application. Grain size was gradually increased according to the increase of $MnO_2$ addition amount and showed the highest value of $1.502{\mu}m$ at the 0.9wt% $MnO_2$. Moreover, density showed the highest value of $7.582 g/cm^3$ at the 0.7wt% $MnO_2$.All the composition ceramics,curie temperature was nearly constant around $330^{\circ}C$

• Journal of Hydrogen and New Energy
• /
• v.17 no.1
• /
• pp.21-30
• /
• 2006

[ $M/Fe_2O_3$ ] (M=Rh, Ce and Zr) mixed oxides were prepared using urea method to develop a medium for chemical hydrogen storage by their redox cycles. And their redox behaviors by repeated cycles were studied using temperature programmed reaction(TPR) technique. Additives such as Rh, Ce and Zr were added to iron oxides in order to lower the reaction temperature for reduction by hydrogen and re-oxidation by water-splitting. From the results, concentration of urea used as a precipitant had little effect on particle size and reduction property of iron oxide. TPR patterns of iron oxide consisted of two reduction peaks due to the course of $Fe_2O_3\;{\rightarrow}\;Fe_3O_4\;{\rightarrow}\;Fe$. The results of repeated redox tests showed that Rh added to iron oxide have an effect on lowering the re-oxidation temperature by water-splitting. Meanwhile, Ce and Zr additives played an important role in prevention of deactivation by repeated cycles. Finally, Fe-oxide(Rh, Ce, Zr) sample added with Rh, Ce and Zr showed the lowest re-oxidation temperature by water-splitting and maintained high $H_2$ recovery in spite of the repeated redox cycles. Consequently, it is expected that Fe-oxide(Rh, Ce, Zr) sample can be a feasible medium for chemical hydrogen storage using redox cycle of iron oxide.

• Korean Journal of Optics and Photonics
• /
• v.17 no.5
• /
• pp.480-486
• /
• 2006

Generally, IR cut-off filters for mobile phone is coated on the glass substrate at high temperature(above $300^{\circ}C$). In this work, we prepared IR cut-off filters on the poly(methyl methacrylate)(PMMA) substrates at low temperature(about $70^{\circ}C$ ). using the $CeO_2\;and\;SiO_2$ coatings by physical vapor deposition. The surface energies of coated and uncoated PMMA, and adhesive properties of IR cut-off filters coatings were examined using contact angle measurements. We demonstrate the improve of mobile phone optical system using these results.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.230.1-230.1
• /
• 2010

조촉매(Promotor)인 Na은 수성가스전이(Water Gas Shift, WGS) 반응 시 생성된 포름산염의 C-H결합을 쉽게 분해하는 역할을 한다. 본 연구에서는 $Pt/CeO_2$ 촉매의 성능 향상을 위해 Na의 담지량을 변화시켜 촉매적 활성을 비교하여 보았다. 제조된 담체는 침전법(Precipitation)을 사용하여 제조하였으며 $500^{\circ}C$에서 6시간 소성하였다. Pt 담지량은 1wt%로 고정하였고 Na 담지량은 1 wt%~5 wt%로 변화를 주어 동시(공)-함침법(Co-incipient wetness method)으로 담지 시켰다. 반응 실험은 공간속도(Gas Hourly Space Velocity, GHSV) $45,385h^{-1}$에서 수행하였다. WGS 반응 결과 3 wt%의 Na이 담지된 $Pt/CeO_2$ 촉매의 경우를 제외하고 나머지 Na이 담지된 촉매들은 비교적 높은 CO의 전환율을 나타내었다. 특히 2 wt%의 Na이 담지된 $Pt/CeO_2$ 촉매는 가장 높은 CO의 전환율을 나타내었다. 따라서 Na 담지량의 변화가 포름산염의 C-H결합 분해에 영향을 미친다는 것을 알 수 있다.