• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.193-194
• /
• 2009

마그네트론 스퍼터링법을 이용하여 투명 Polyimide 기판과 ITO 박막 사이에 다양한 두께의 $CeO_2$ 버퍼층을 증착 후 기계적, 전기적, 광학적 특성을 조사하였다. $CeO_2$ 버퍼층의 두께가 증가함에 따라서 degassing 현상의 감소로 인해 전기적 특성의 개선 및 부착력의 증가를 확인할 수 있었으며, 5nm 두께의 $CeO_2$ 버퍼층이 삽입된 ITO/$CeO_2$ 박막에서 가장 우수한 기계적 특성을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2461-2465
• /
• 2013

Pd-$Ce/{\gamma}-Al_2O_3-TiO_2$ catalysts were prepared by combined sol-gel and impregnation methods. Transmission electron microscopy, X-ray diffraction, $H_2$-temperature-programmed reduction, $O_2$-temperature-programmed desorption, and ethanol oxidation experiments were conducted to determine the properties of the catalysts. Addition of an optimal amount of Ce improved the performance of the $Pd/{\gamma}-Al_2O_3-TiO_2$ catalyst in promoting the complete oxidation of ethanol. The catalyst with 1% Ce exhibited the highest activity, and catalyzed complete oxidation of ethanol at $175^{\circ}C$; its selectivity to $CO_2$ reached 87%. Characterization results show that addition of appropriate amount of Ce could enrich the PdO species, and weaken the Pd-O bonds, thus enhancing oxidation ability of the catalyst. Meanwhile, the introduction of $CeO_2$ could make PdO better dispersed on ${\gamma}-Al_2O_3-TiO_2$, which is beneficial for the improvement of the catalytic oxidation activity.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.3
• /
• pp.21-26
• /
• 2004

Deposition condition of YBa$_2$Cu$_3$$O_{7-x}$ (YBCO) films on moving IBAD templates (CeO$_2$/IBAD-YSZ/SS) was studied in a hot-wall type metal organic chemical vapor deposition (MOCVD) process using single liquid source. The reel velocity was 40 cm/hr and the source mole ratios of Y(tmhd)$_3$:Ba(tmhd)$_2$:Cu(tmhd)$_2$ were 1:2.3:3.1 and 1:2.1:2,9, Two different types of IBAD templates with thin CeO$_2$ and thick CeO$_2$ layers were used, The YBCO films were successfully deposited at the deposition temperatures of 780~89$0^{\circ}C$ ; the a-axis growth was observed together with the c-axis growth up to 83$0^{\circ}C$. while the c-axis growth became dominant above 83$0^{\circ}C$. The top surface of the c-axis film was fairly dense and included a small amount of the a-axis growth, although the peaks of the a-axis grains were not observed in XRD pattern, The YBCO film deposited on IBAD template with thin CeO$_2$ layer showed low critical current of 2.5 A/cm-width. while the YBCO film deposited on IBAD template with thick CeO$_2$ layer showed higher critical current of 50 A/cm-width. This result indicates that thick CeO$_2$ layer is thermally more stable than thin CeO$_2$ layer at the high deposition temperature of the MOCVD process.s.

• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.95-105
• /
• 1995

Ceria(CeO2) stabilized zirconia(CeSZ) sol was synthesized with zirconium n-butoxide Zr(OC4H9)4 and cerium nitrate hexahydrate Ce(NO3)3.6H2O as precursors and ethylacetoacetate(EAcAc) as a chelating agent under atmosphere. CeSZ films were deposited on AISI 304 stainless steel using the prepared polymeric sol by dipcoating and the coating characteristics were investigated by XRD, ellipsometry, scratch test and SEM. The CeSZ film began to crystallize from amorphous to tetragonal phase at 40$0^{\circ}C$ and it was not converted into monoclinic phase up to 100$0^{\circ}C$ by the addition of 16mol% CeO2 as a stabilizer which could suppress phase transformation of zirconia. The CeSZ films were prepared by varying the EAcAc contents and the cncentration of CeSZ sol and measured the thickness and refractive index. From these results, it was found that the EAcAc contents and concentration of CeSZ coating sol evidently affect the densification of CeSZ film. The CeSZ film coated with 0.4M CeSZ sol and heat-treated at $600^{\circ}C$ for 10min had thickness of 50nm and 17% porosity. The CeSZ film on 304 stainless steel effectively acted as a protective layer against oxidation up to 80$0^{\circ}C$ and had superior corrosion resistance in 25% H2SO4 solution for 4.5 hrs.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.48-52
• /
• 2019

The blue emitting fluorescence of $SrAl_{12}O_{19}:Ce_{0.09}{^{3+}}$, $Eu_{0.01}{^{2+}}$ phosphor includes two kinds of independent energy transfer mechanism through electric multipole interactions between donor and acceptor ions. The first energy transfer takes place between the $Ce^{3+}$ ion and the $Eu^{2+}$ion which strongly depends on the concentration $Eu^{2+}$ions. The second energy transfer occurs between the $Ce^{3+}$ ion and the $O_{Me}-Ce^{3+}$ complexes. Both energy transfer mechanisms of blue emitting peak at 410 nm were investigated by fitting of Gaussian functions. The result shows that the peak at 410 nm is two overlapping emissions originated by $Eu^{2+}$ions and $O_{Me}-Ce^{3+}$ complexes and as time elapses $Eu^{2+}$peak remains whereas $O_{Me}-Ce^{3+}$ related peak disappears.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.229.2-229.2
• /
• 2010

한 단계 수성가스전이반응(Single stage water gas shift reaction)을 위해 높은 산소저장능(OSC: Oxygen Storage Capacity)을 가진 $CeO_2$를 담체로 사용하여 $Pt/CeO_2$ 촉매를 설계하였다. 촉매의 제조 조건은 촉매 활성과 매우 밀접한 관계가 있다. 따라서 $Pt/CeO_2$ 촉매에 제조변수를 다양하게 변화하여 성능을 평가하였다. 촉매 반응 실험은 공간속도(GHSV: Gas Hourly Space Velocity) $45,515h^{-1}$에서 수행하였다. 본 연구에서는 $Pt/CeO_2$ 촉매를 최적화하기 위해 촉매 제조 조건 중 소성온도, 배치 당 제조질량, 전구체 그리고 pH 와 같은 다양한 제조 조건으로 촉매의 성능을 평가하였다.

• Journal of the Korean Ceramic Society
• /
• v.30 no.9
• /
• pp.761-767
• /
• 1993

Electrical and mechanical properties of Pb(Mg, Te, Mn, Nb)O3-PZT ceramics are investigated as a function of CeO2 addition (0 to 0.3wt%), and the output characteristics of piezoelectric transformer are also presented. The grain size decreased and the shapes of particles were more uniform with the addition of CeO2. The coercive electric field(9500V/cm), mechanical quality factor (2500) and bend strength (1065kg/$\textrm{cm}^2$) were improved by addition of CeO2 0.2wt%. After repetition of a number of stress cycles, the degradation of k33 was not found in this sample. The voltage step-up ratio (Vdc/Vrms) of piezoelectric ceramic transformer (half wavevoltage doubler, load resistor 100M.ohm) was about 950 in a linear region, its value was relatively higher than other materials.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.208-208
• /
• 2009

메탄의 수증기-이산화탄소 복합개질반응에서 니켈 촉매의 탄소 침적 저항성에대한 Ce 증진 효과를 살펴보기 위해, Ni-Ce/${\alpha}-Al_2O_3$ 촉매를 제조하였다. Ce/Ni 비율 변화에 따른 촉매 비표면적, Ni 입자 분산도 및 촉매 활성 변화를 살펴보았고, Ce 첨가량을 최적화 할 수 있었다. Ce/Ni 비율 증가에 따라 NiO 결정크기가 감소하고 표면적과 Ni 분산도는 증가하였다. 특히, Ce/Ni=0.5 첨가 시, 촉매는 가장 넓은 비표면적과 Ni 분산도를 가졌으며, 우수한 촉매 활성 및 높은 탄소 침적 저항성을 보였다. 또한, 본 연구에서는 Ni과 Ce 담지 방법에 따른 Ni 분산도 향상과 Ni과 Ce간의 접촉 면적 극대화를 통한 활성산소 공급 향상에 대한 영향을 함께 살펴보았다. Ni과 Ce를 동시 함침법과 연속 함침법으로 담지하여 비교한 결과, 동시 함침법으로 제조한 Ni-Ce/${\alpha}-Al_2O_3$ (Ce/Ni=0.5) 촉매가 가장 우수한 촉매 성능 및 높은 탄소 침적 저항성을 보였다. 이는 동시 함침법으로 고분산된 Ni 입자와 담체간의 강한 상호작용 형성과 원활한 활성 산소 공급에 기인한 것이다.

• Journal of Hydrogen and New Energy
• /
• v.14 no.2
• /
• pp.155-170
• /
• 2003

$Cu-Ce/{\gamma}-Al_2O_3$ based catalysts were prepared and tested for selective oxidation of CO in a $H_2$-rich stream(1% CO, 1% $O_2$, 60% $H_2$, $N_2$ as balance). The effects of Cu loading and weight ratio(=Cu/(Cu+Ce)) upon both activity and selectivity were investigated upon the change in temperatures, It was also examined how the activity and selectivity of catalysts were varied with the presence of $CO_2$ and $H_2O$ in the reactant feed. Among the various Cu-Ce catalysts with different catalytic metal composition, Cu-Ce(4 : 16 wf%) /${\gamma}-Al_2O_3$ catalyst showed the highest activity(>$T_{99}$) and selectivities(50-80%) under wide range of temperatures($175-220^{\circ}C$). However, in the Cu-Ce(4 : 16 wt%)/ ${\gamma}-Al_2O_3$, the presence of $CO_2$ and $H_2O$ in the reactant feed decreased the activity and the maximum activity(>$T_{99}$) in terms of reaction temperature moved by about $25^{\circ}C$ toward higher temperature, the $T_{>99}$ window was seen between $210-230^{\circ}C$ (selectivity 50-75%). From $CO_2-/H_2O-TPD$, it can be concluded that the main cause for the decrease in catalytic activity may be attributed to the blockage of the active sites by competitive adsorption of water vapor and $CO_2$ with the reactant at low temperatures.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.873-875
• /
• 1999

We have fabricated good quality superconducting $YBa_{2}Cu_{3}O_{7-\delta}$ thin films on Hastelloy(Ni-Cr-Mo alloys) metallic substrate with $CeO_2$ and $BaTiO_3$ buffer layers in-situ by pulsed laser deposition in a multi-target processing chamber. We have chosen $CeO_2$ as a buffer layer which has cubic structure of $5.41{\AA}$ lattice parameter and only 0.2% of lattice mismatch with YBCO. $CeO_2$ layer may be helpful for power transmission due to its conducting property. In order to enhance the crystallization of YBCO films on metallic substrates. we deposited $CeO_2$ and $BaTiO_3$ buffer layers at various temperatures. The YBCO superconducting tape fabricated with $BaTiO_3$ and $CeO_2$ buffer layers shows 85K of transition temperature and about $8.4{\times}10^4A/cm^2$ of critical current density at 77K.