• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.383-390
• /
• 2008

Flow pattern of cavitation around a plano-convex foil, whose shape is similar to the inducer impeller of the turbo-pumps in the liquid fuel rocket engine, was observed by using a cryogenic cavitation tunnel of blowdown type for visualization. Working fluids were liquid nitrogen and hot water. The parameter range to be varied was between 20 and 60mm for channel width, 20 and 60mm for foil chord, -1.8 and 13.2 for cavitation number, 3.7 and 19.5m/sec for averaged inlet velocity, $8.5{\times}10^4$ and $1.5{\times}10^6$ for Reynolds number, -8 and $8^{\circ}$ for angle of attack, respectively. Especially at positive angle of attack, namely, convex surface being downstream, the whole cavity or a part of the cavity on the foil surface departs periodically. Periodic cavitation occurs only in case of smaller cavitation size than twice foil chord. Cavitation thickness and length in 20mm wide channel are larger than those in 60mm due to the wall confinement effect. Therefore, periodic cavitation in 60mm wide channel easily occurs than that in 20mm. These results suggest that the periodic cavitation is controlled by not only the hydrodynamic effect of vortex shedding but also the channel wall confinement effect.

• Journal of Species Research
• /
• 제12권1호
• /
• pp.55-67
• /
• 2023

Two new records of marine nematodes, belonging to the family Ironidae de Man, 1876, are reported based on the specimens collected from intertidal sediments from the west coast of Korea. Conilia sinensis is characterized by a relatively long body length, a well-developed buccal cavity with three claw-like teeth, the presence of a single spicule with transverse striations, the presence of rib-shaped telamons, and single precloacal supplement. Pheronous donghaiensis is distinguished from other species of the genus by a well-developed buccal cavity with four claw-like solid teeth and minute denticles, relatively short and thick spicules with the central septum, the presence of 8-9 curved tubular-shaped precloacal supplements, and a sharp pointed tail with three small tubular supplements arranged into two rows in males. In this report, we provide a taxonomic description and illustrations of two unrecorded species of the family Ironidae by differential interference contrast microscopy. This is the first taxonomic report on the species of the family Ironidae from Korea.

• 대한조선학회논문집
• /
• 제60권4호
• /
• pp.240-247
• /
• 2023

In this study, morphological and hydrodynamic characteristics of the non-axisymmetric supercavity generated behind a disk-shaped cavitator were examined. By extending the previous study on axisymmetric supercavitating flow based on a boundary element method, hydrodynamic forces acting under the angle of attack condition of 0 to 30 ° and shape characteristics of the supercavity were analyzed. The results revealed that increasing the angle of attack by 30 ° reduced the length and width of the cavity by about 15% and the volume by about 40 %. An empirical formula that can quantitatively estimate the geometrical characteristics and change of the cavity was derived. It is expected that this method can be used to evaluate the shape information and force characteristics of the supercavity for the control of the vehicle in a very short time compared to the viscous analysis in the initial design stage of the supercavity underwater vehicle.

• 한국음향학회지
• /
• 제26권1호
• /
• pp.8-15
• /
• 2007

음향 공동-유리창 연성계를 대상으로 도청음의 음성 명료도를 검토한다. MLS신호를 음원으로 유리창의 가속도와 속도 응답을 가속도계와 레이저 도플러 진동계를 사용하여 측정한다. 변조전송함수 (MTF)를 사용하여 공동-유리창 진동계의 음성전달특성을 규명한다. 변조전송함수에 근거하여 음성전송지수 (STI)를 구하고, 유리창 진동음의 음성명료도를 평가한다. 가속도음과 속도음의 음성명료도를 비교하고, 최종적으로 대화음의 명료도를 주관적 평가로 확인한다.

• Journal of Magnetics
• /
• 제19권2호
• /
• pp.185-191
• /
• 2014

In this study we evaluated that flow rate changes affect the (time of flight) TOF image and contrast-enhanced (CE) in a three-dimensional TOF angiography. We used a 3.0T MR System, a nonpulsatile flow rate model. Saline was used as a fluid injected at a flow rate of 11.4 cm/sec by auto injector. The fluid signal strength, phantom body signal strength and background signal strength were measured at 1, 5, 10, 15, 20 and 25-th cross-section in the experienced images and then they were used to determine signal-to-noise ratio and contrast-to-noise ratio. The inlet, middle and outlet length were measured using coronal images obtained through the maximum intensity projection method. As a result, the length of inner cavity was 2.66 mm with no difference among the inlet, middle and outlet length. We also could know that the magnification rate is 49-55.6% in inlet part, 49-59% in middle part and 49-59% in outlet part, and so the image is generally larger than in the actual measurement. Signal-to-noise ratio and contrast-to-noise ratio were negatively correlated with the fluid velocity and so we could see that signal-to-noise ratio and contrast-to-noise ratio are reduced by faster fluid velocity. Signal-to-noise ratio was 42.2-52.5 in 5-25th section and contrast-to-noise ratio was from 34.0-46.1 also not different, but there was a difference in the 1st section. The smallest 3D TOF MRA measure was $2.51{\pm}0.12mm$ with a flow velocity of 40 cm/s. Consequently, 3D TOF MRA tests show that the faster fluid velocity decreases the signal-to-noise ratio and contrast-to-noise ratio, and basically it can be determined that 3D TOF MRA and 3D CE MRA are displayed larger than in the actual measurement.

• 한국광학회지
• /
• 제16권1호
• /
• pp.85-98
• /
• 2005

두 개의 DFB 영역과 위상 조정 영역으로 구성된 다중 전극 index-coupled DFB 레이저에서 self-pulsation 동작 특성을 수치 해석으로 분석하였다. 금지 대역폭 내에 존재하는 전체 공진기 모드 수가 감소할수록 두 DFB 영역의 브래그 파장 차이인 $\Delta$λ$_{B}$가 변화할 때 발진 모드의 호핑이 발생하는 경우의 수가 적어져 pulsation 주파수가 불연속적으로 변화하는 경우의 수가 감소한다. 또한 고정된 $\Delta$λ$_{B}$에 대하여 위상 조정 영역의 위상이 변화할 때 pulsation 주파수가 연속적으로 변화한다. 결합 세기와 위상 조정 영역의 길이가 고정되어 있을 때 금지 대역폭 내에 존재하는 전체 공진기 모드의 수는 DFB 영역의 길이가 길수록 감소한다. 반면에 DFB 영역의 결합 세기와 길이가 고정되어 있을 때 금지 대역폭 내에 존재하는 전체 공진기 모드의 수는 위상 조정 영역의 길이가 작을수록 감소한다. 따라서 결합 세기 및 각 영역의 길이를 적절히 조정하면 $\Delta$λ$_{B}$ 또는 위상조정 영역의 위상이 변화하여도 모드 호핑이 발생하지 않아 안정된 pulsation 동작을 얻을 수 있음을 보였다.을 보였다.

• 대한의생명과학회지
• /
• 제16권1호
• /
• pp.1-9
• /
• 2010

In order to understand the effects of all-trans-RA on palate development, RA was injected into the abdominal cavity of pregnant mice and then the embryos were taken in the following days and analyzed morphologically as well as molecular biologically. When RA was administered at the stage of E11 or E15, the overall craniofacial development was retarded. The length from jaw to eye was shortened, compared to that of normal group. When the E11 embryos were exposed to RA, cleft lip was also found along with the cleft palate. In vitro palate culture experiment also revealed that RA caused cleft palate. When RT-PCR was performed, early stage administration of RA at E11 inhibited the upregulation of Hoxa7 expression at E15 through E17. Whereas in control group, high level of Hoxa7 expression was detected in the palate of E15 to E17. In the case of Bax, the expression was decreased from E16, while remaining constant in control group. When TUNEL analysis was performed following the RA treatment at E15, TUNEL positive cells were detected in the mesenchymal cells as well as epithelial cells of palatal shelves of E16 and in E17 embryos. Whereas in normal control, TUNEL positive cells were observed mostly at the epithelium around the nasal cavity and oral cavity where rugae is made. These results altogether indicate that exposure to RA during palate development causes facial deformity including cleft palate and cleft lip by modulating the expression of homeotic genes such as Hoxa7 as well as an apoptosis-related gene, Bax, and thus malregulating the apoptosis.

• 전자공학회논문지SC
• /
• 제46권2호
• /
• pp.36-40
• /
• 2009

본 연구에서는 비분산 적외선 방식을 이용한 일산화탄소, 이산화탄소 듀얼 센서 모듈을 실현한다. 비분산 적외선 방식은 가스분자가 특정 파장의 적외선을 흡수하는 특성을 이용하여 가스의 적외선 흡수도를 측정하여 농도로 환산하는 방식이다. 비분산 적외선 방식은 수명이 길고 정밀도가 높아 기존의 접촉식(화학식) 센서에 비해 우수한 특성을 가지고 있다. 중요한 기술은 NDIR의 핵심 부분인 광공동의 설계 기술과 센서의 성능을 최종 결정짓는 농도-온도 교정 기술이다. 현재까지 개발된 광 공동 기술은 CO2센서의 단일 센서 방식이었다. 본 연구에서는 이 기술을 접목한 일산화탄소까지 동시에 측정할 수 있는 광공동기술과 교정기술을 연구 개발하여 하나의 광 공동으로 이산화탄소와 일산화탄소를 동시에 측정 할 수 있는 고기능 센서를 실현하는 것이다.

• International Journal of Fluid Machinery and Systems
• /
• 제2권4호
• /
• pp.269-277
• /
• 2009

The current paper focuses on the analysis of transient cavitating flow in pressurised polyethylene pipes, which are characterized by viscoelastic rheological behaviour. A hydraulic transient solver that describes fluid transients in plastic pipes has been developed. This solver incorporates the description of dynamic effects related to the energy dissipation (unsteady friction), the rheological mechanical behaviour of the viscoelastic pipe and the cavitating pipe flow. The Discrete Vapour Cavity Model (DVCM) and the Discrete Gas Cavity Model (DGCM) have been used to describe transient cavitating flow. Such models assume that discrete air cavities are formed in fixed sections of the pipeline and consider a constant wave speed in pipe reaches between these cavities. The cavity dimension (and pressure) is allowed to grow and collapse according to the mass conservation principle. An extensive experimental programme has been carried out in an experimental set-up composed of high-density polyethylene (HDPE) pipes, assembled at Instituto Superior T$\acute{e}$cnico of Lisbon, Portugal. The experimental facility is composed of a single pipeline with a total length of 203 m and inner diameter of 44 mm. The creep function of HDPE pipes was determined by using an inverse model based on transient pressure data collected during experimental runs without cavitating flow. Transient tests were carried out by the fast closure of the ball valves located at downstream end of the pipeline for the non-cavitating flow and at upstream for the cavitating flow. Once the rheological behaviour of HDPE pipes were known, computational simulations have been run in order to describe the hydraulic behaviour of the system for the cavitating pipe flow. The calibrated transient solver is capable of accurately describing the attenuation, dispersion and shape of observed transient pressures. The effects related to the viscoelasticity of HDPE pipes and to the occurrence of vapour pressures during the transient event are discussed.

• Fisheries and Aquatic Sciences
• /
• 제19권5호
• /
• pp.26.1-26.8
• /
• 2016

Background: The nematode species belonging to genus Anisakis occur at their third larval stage in numerous marine teleost fish species worldwide and known to cause accidental human infection through the ingestion of raw or undercooked fish or squids. They may also draw the attention of consumers because of the visual impact of both alive and dead worms. Therefore, the information on their geographical distribution and clear species identification is important for epidemiological survey and further prevention of human infection. Results: For identification of anisakid nematodes species isolated from largehead hairtail (Trichiurus japonicus), polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) analysis of internal transcribed spacers of ribosomal DNA were conducted. Mitochondrial cytochrome c oxidase subunit 2 gene was also sequenced, and phylogenetic analysis was conducted. From the largehead hairtail (n = 9), 1259 nematodes were isolated in total. Most of the nematodes were found encapsulated throughout the viscera (56.2 %, 708/1259) or moving freely in the body cavity (41.5 %, 523/1259), and only 0.3 % (4/1259) was found in the muscles. By PCR-RFLP, three different nematode species were identified. Anisakis pegreffii was the most dominantly found (98.7 %, 1243/1259) from the largehead hairtail, occupying 98.7 % (699/708) of the nematodes in the mesenteries and 98.1 % (513/523) in the body cavity. Hybrid genotype (Anisakis simplex ${\times}$ A. pegreffii) occupied 0.5 %, and Hysterothylacium sp. occupied 0.2 % of the nematodes isolated in this study. Conclusions: The largehead hairtail may not significantly contribute accidental human infection of anisakid nematode third stage larvae because most of the nematodes were found from the viscera or body cavity, which are not consumed raw. But, a high prevalence of anisakid nematode larvae in the largehead hairtail is still in concern because they may raise food safety problems to consumers. Immediate evisceration or freezing of fish after catch will be necessary before consumption.