• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.167-171
• /
• 2003

Acoustic characteristics of baffled combustion chamber to elucidate suppressing effect of baffle on combustion instability are numerically investigated by linear acoustic analysis. A hub-blade baffle of 5 blades is selected as a candidate one and five variants of baffles with various configuration are designed. Resonant-frequency shift and damping factor are analyzed quantitatively as damping parameters. When the hub is located radially at the pressure node, the decrease of resonant frequency and increase of damping factor in 1R mode are dominant. But sub-1T mode is formed within hub, therefore, there would be a possibility of initiating 1T mode in unbaffled region, which would occur another problem. For smaller hub size, four kinds of axial baffle length is selected. As the axial baffle length increases, resonant frequency shift and increase of damping factor of transverse acoustic modes is obtained. Especially, two close acoustic modes such as 1L and 1T could be overlapped for a certain axial length, resulting in extreme increase of damping factor. The present study based on linear acoustic analysis is expected to be a useful confirming tool to predict acoustic field and design a passive control devices such as baffle and acoustic cavity.

• 한국소음진동공학회논문집
• /
• 제22권12호
• /
• pp.1199-1205
• /
• 2012

An empirical acoustic impedance model of acoustic resonators with extended neck at a high sound pressure environment is proposed. The acoustic resonator with extended neck into its cavity is appropriate for the launcher fairing application because the length of neck does not increase the total height of the resonator. This enables one to design slim and light acoustic resonators for launch vehicles. The suggested acoustic impedance model considers the incident pressure and geometric variables(the neck length, the perforation ratio and the hole diameter) in terms of non-dimensional variables. Several acoustic resonators with extended neck are manufactured and their wall impedances are measured according to the pre-defined incident pressure levels. Effects of non-dimensional variables on the non-linear acoustic impedance are investigated so that a simple non-linear impedance model for the launcher fairing application can be proposed. It is demonstrated that the estimated acoustic resistance and acoustic length correction show reasonable agreement with the measured ones within the range of design parameters for launcher fairings.

• Journal of the Optical Society of Korea
• /
• 제16권1호
• /
• pp.22-28
• /
• 2012

We report a focal-length tunable liquid lens based on thermopneumatically driven fluidic pressure. The fluidic pressure is generated by deformation of an elastomeric diaphragm induced by thermopneumaticity from a laterally integrated microheater sealed within an air chamber. The pressure is transmitted by a confined liquid to a lens diaphragm through an internal fluid channel. The liquid filling under the lens diaphragm functions as a liquid lens for dynamic focusing with properties depending on the curvature of the deformed diaphragm. The diaphragm area of the air chamber is designed five times larger than that of the lens cavity to yield high focal-length tunability by amplified deflection of the lens diaphragm. With our method, we achieved excellent focal-length tunability from infinity (without an input current) to 4 mm (with an input current of 12 mA) with a lens aperture diameter of 2 mm.

• Imaging Science in Dentistry
• /
• 제50권3호
• /
• pp.183-192
• /
• 2020

Purpose: This study was performed to assess the accuracy of preoperative cone-beam computed tomography (CBCT), when justified for other reasons, in locating the apical foramen and establishing the working length. Materials and Methods: Six electronic databases were searched for studies on this subject. All studies, of any type, were included if they compared measurements of working length with preoperative CBCT to measurements using an electronic apex locator (EAL) or histological reference standard. Due to the high levels of heterogeneity, an inverse-variance random-effects model was chosen, and weighted mean differences were obtained with 95% confidence intervals and P values. Results: Nine studies were included. Compared to a histological reference standard, CBCT indicated that the apical foramen was on average 0.40 mm coronal of its histological position, with a mean absolute difference of 0.48 mm. Comparisons were also performed to an EAL reference standard, but the conclusions could not be considered robust due to high levels of heterogeneity in the results. Conclusion: A low level of evidence is produced suggesting that preoperative CBCT shows the apical foramen to be on average 0.40 mm coronal to its histological position, with a mean absolute difference of 0.48 mm.

• 한국통신학회논문지
• /
• 제12권2호
• /
• pp.133-138
• /
• 1987

본 논문에서는 Re-enterant 공동 공진기의 내부 도체봉 길이 변화에 따른 공진 주파수의 가변특성을 실험정그로 고찰하였다. 실험시 제작된 공진기는 동축 케이블과 원형 도파관을 경합한 형태로서 동축 케이블의 내부 도체봉의 길이를 축방향으로 면화시킬 수 있도록 하여, 내부 도체봉의 임의의 길이에 대한 Tmonq 모드의 공진 주파수를 측정하였다. 경과의 타당성을 입증하기 위해서 실험 경과와 여러 사람들의 이론치를 비교하였다. 본 실험의 결과는 파장계, 공진기?l 증폭기의 공진 회로의 설계및 제작에 활용할 수 있으며 마이크로 웨이브 집적회로(MIC, Microwave Integrated Circuits)나 여과기에 사용되는 유전체 공진기의 공진 주파수를 가변시키는데도 사용할 수 있다.

• Animal Systematics, Evolution and Diversity
• /
• 제36권3호
• /
• pp.240-250
• /
• 2020

Member of the genus Tobrilus Andrássy, 1959, which belongs to Tobrilidae Filipjev, 1918, are known as free-living nematodes in freshwater habitat. This genus was previously unknown from Korea. Five Tobrilus species are here reported for the first time from Korea: Tobrilus aberrans (Schneider, 1925), Tobrilus diversipapillatus (Daday, 1905), Tobrilus gracilis (Bastian, 1865), Tobrilus longus (Leidy, 1851), and Tobrilus wesenbergi (Micoletzky, 1925). Specimens were collected from sediments of the Nakdong River in Korea. Morphological characters and measurements of the specimens generally agree with the original descriptions of Tobrilus species, except for some differences that can be attributed to intraspecific variation among populations(e.g., nerve ring position [% pharynx] and reproductive length). Each species can be distinguished from other members of the genus by specific characters (e.g., cephalic setae length and position, buccal cavity and pocket shape, vulva position, degree of development of reproductive system, and tail length and shape). Here, five species in the genus Tobrilus are fully redescribed and illustrated using optical microscopy images. DNA barcode sequence information (the D2-D3 region of 28S rDNA) is also provided for molecular species identification.

• 한국발생생물학회지:발생과생식
• /
• 제2권1호
• /
• pp.69-74
• /
• 1998

부화 후부터 평균전장 0.64 cm를 나타내는 부화 후 150일까지의 버들치, Rhynchocypris oxycephalus를 대상으로 초기생식소 발달과 성분화를 조사하였다. 시언생식세포는 평균전장 0.64cm 자어에서 뚜렷이 나타나\ulcorner. 평균전장 1.91 cm자어에서 시원생식세포는 복강으로돌출되었으며, 평균전장 2.29 cm 자어에서 시원생식세포는 감수분열 난모세포로 전환되었고, 난소로의 분화가 최초 확인되엇따. 평균전장 5.96 cm 자어에서 암컷 생식소는 점진적으로 발달하였으며 성숙단계로 접어드는 핵이동 난모세포를 보였다. 성분화 후 난모세포는 빠르게 증식하는 반면 정소는 평균전장 4.00cm 자어까지는 성장이 중지된 채 증가만 하는 휴지상태이었다. 평규전장 4.00cm 자어에서의 정모세포는 중간기에서 발달이 정지되었으며, 감수분열이 활발하였고, Sertoli-like cell과 정소관이 형성되었다. 본 연구 결과 버들치의 성본화 양상은 분화형 장웅이체 (differentiated gonochorism)인 것으로 나타났다.

• 수산해양기술연구
• /
• 제46권4호
• /
• pp.458-465
• /
• 2010

Hundreds of Steller sea lions, Eumetopias jubatus, migrate from Sakhalin and the northern Kuril Islands to Hokkaido every winter. During this migration, they may use their roaring sounds to navigate and to maintain their groups. We recorded the roars of wild Steller sea lions that had landed on reefs on the west coast of Hokkaido, and those of captive sea lions, while making video recordings. A total of 300 roars of wild sea lions and 870 roars of captive sea lions were sampled. The fundamental frequency ($F_0$), formant frequency ($F_1$), pulse repetition rate (PRR), and duration of syllables (T) were analyzed using a sonagraph. $F_0$, $F_1$, and PRR of the roars emitted by captive sea lions increased in the order male, female, and juvenile. By contrast, the $F_1$ of wild males was lower than that of females, while the $F_0$ and PRR of wild males and females did not differ statistically. Moreover, the $F_0$ and $F_1$ frequencies for captive sea lions were higher than those of wild sea lions, while PRR in captive sea lions was lower than in wild sea lions. Since there was a linear relationship between body length and the $F_0$ and $F_1$ frequencies in captive sea lions, the body length distribution of wild sea lions could be estimated from the $F_0$ and $F_1$ frequency distribution using a regression equation. These results roughly agree with the body length distribution derived from photographic geometry. As the volume of the oral cavity and the length of the vocal cords are generally proportional to body length, sampled roars can provide useful information about a population, such as the body length distribution and sex ratio.

• 대한수의학회지
• /
• 제36권2호
• /
• pp.289-296
• /
• 1996

A case of schistosomus reflexes in Korean native female calf was observed macroscopically and radiographically. The results were summarized as follows. 1. The abdominal visceral organs were exposed. 2. The vertebral column bent laterally to the left, and the sacrum approached to the cranium by reflected caudal lumber vertebrae, presenting S-shaped lateral twisting of the vertebrae. 3. The right ribs reflected laterally and dorso-cranially from the 7th rib to 13th rib. The left ribs bent caudally from 8th rib to 13th rib. 4. The length of rudimentary 6th right rib was one half of normal size and the 7th right rib was one third. 5. The sternum was bifid split from the fourth sternebra through the xyphoid cartilage. 6. The diaphragm was intact and thoracic cavity was reduced in size. The lung and heart severely deformed in shape and size. 7. The liver markedly deformed in shape and thickness. 8. The pelvic cavity was reduced in size by compression laterally to the left. 9. The uterus horn, ovary, urinary bladder, and urethra were severely deformed in the shape and position.

• 한국항해항만학회지
• /
• 제32권9호
• /
• pp.705-709
• /
• 2008

In the sea various methods have been conducted to capture wave energy which include the use of pendulums, pneumatic devices, etc. Floating devices, such as a cavity resonance device take advantages of both the water motion and the wave induced motions of the floating body itself. The wave energy converter is known commercially as the WAGB(Wave Activated Generator Buoy) and is used in some commercially available buoys to power navigation aids such as lights and horns. This wave energy converter consists of a circular flotation body which contains a vertical water column that has free communication with the sea. A theoretical analysis of this power generated by a pneumatic type wave energy converter is performed and the results obtained from the analysis are used for a real wave energy converter buoy. This paper is shown to have an optimum value for which maximum power is obtained at a given resonant wave period Also, the length of the internal water column corresponds to that of the water mass in the water column. If designed properly, wave energy converter can take advantage not only of the cavity resonance, but also qf the heaving motion of the buoy. Finally, simulation is performed with a LabVIEW program and the simulation results are applied to a wave energy simulator for modifying design data for a wave energy converter.