• 한국항공우주학회지
• /
• 제34권6호
• /
• pp.59-66
• /
• 2006

액체 로켓엔진에서의 고주파 연소불안정 제어를 위한 수동 안정화 제어 기구로 음향공을 적용하여 감쇠 효과의 적합성을 검증하였다. 우선, 기본형 모델링 연소실에서 발생한 유해 공진주파수는 음향공의 동조를 통하여 효과적으로 감쇠될 수 있음을 확인 하였다. 또한, 음향공의 기하학적 형상에 따른 음향 감쇠 효과를 비교하기 위하여, 주요 설계 변수를 변화시킨 몇 가지 음향공 모델에 대해 유해 공진주파수 감쇠 효과를 정량적으로 비교, 분석하였다. 선형음향해석과 실험적 방법 모두 만족할만한 일치성을 나타내었으며, 오리피스 입구 면적이 가장 크거나 오리피스 길이가 가장 짧은 경우에서 감쇠 효과가 가장 크게 나타났다. 결론적으로 음향공을 이용한 최적의 음향공 제어를 위해서는 음향공 부피를 고려한 최적의 음향공 설계가 절대적으로 필요함을 입증한다.

• 대한조선학회지
• /
• 제27권4호
• /
• pp.15-26
• /
• 1990

본 연구는 표면 양력관 이론을 이용하여 초월 공동이 발생한 2차원 날개의 유동해석을 위한 제반 경계 조건을 검증하고 공동 뒷부분의 모형을 비교 검토한다. 해석해가 존재하는 2차원 대칭 스트럿 주위의 초월 공동 현상을 수치적으로 해석하여 그 결과를 해석해와 비교함으로써 표면 양력판 이론에 의한 프로펠러 공동 문제 해석의 가능성을 입증하였다. 특히, 공동 뒷부분의 비 선형 닫힘 모형, 타원형 닫힘 모형, 그리고 선형 닫힘 조건을 서로 비교 분석함으로써 공동 문제 해결에서 가장 중요한 공동 닫힘 조건의 영향을 보였다.

• 한국CDE학회논문집
• /
• 제15권5호
• /
• pp.354-361
• /
• 2010

The paper presents an efficient computation of optimal tool length for 5-axis mold & die machining. The implemented procedure processes an NC file as an initial input, where the NC data is generated by another commercial CAM system. A commercial CAM system generates 5-axis machining NC data which, in its own way, is optimal based on pre-defined machining condition such as tool-path pattern, tool-axis control via inclination angles, etc. The proper tool-length should also be provided. The tool-length should be as small as possible in order to enhance machinability as well as surface finish. A feasible tool-length at each NC block can be obtained by checking interference between workpiece and tool components, usually when the tool-axis is not modified at this stage for most CAM systems. Then the minimum feasible tool-length for an NC file consisting of N blocks is the maximum of N tool-length values. However, it can be noted that slight modification of tool-axis at each block may reduce the minimum feasible tool-length in mold & die machining. This approach can effectively be applied in machining feature regions such as steep wall or deep cavity. It has been implemented and is used at a molding die manufacturing company in Korea.

• 대한수의학회지
• /
• 제13권1호
• /
• pp.75-77
• /
• 1973

A large plerocercoid was found from abdominal cavity of hen slaughtered in a slaughter-chicken house at Chyung Yang market in Seoul. The worm was identified as Diphyllobothrium mansoni of Genus Spirometra and the length of whole body was approximately 50 cm.

• 한국패류학회지
• /
• 제15권1호
• /
• pp.57-62
• /
• 1999

Condition index(Cl)는 일반적으로 이매패류의 영양상태와 건강 등의 생리적인 상태를 알기 위한 중요한 지수이다. 이 연구는 제주도 추자 연안에 서식하는 홍합(M.coruscus)의 Cl를 다음과 같은 세 가지 방법으로 산출한 뒤, 이를 비교하였다: (1) Cl-vol=[tissue dry weight(g) 1000]shell cavity volume(ml). (2) Cl-wt=[tissue dry weight(g) 1000]internal shell cavith capacity(g). (3) Cl-size= tissue wet weight(g)/[shell length (mm)]$^{3}$. Cl-vol 산정을 위한 패각내 부피는 아르키메데스의 원리를 이용하였으며, 전체 부피와 육질을 제거한 패각의 부피 차를 이용하여 산출하였다. 월 별 세 가지 Ci들의 변화는 Pearson의 상관계수, 분산분석(ANOVA)과 Duncan의 다중검정법을 사용하여 세 지수의 유의성과 처리평균간의 근사 정도를 검정하였다. 실험에 이용된 홍합의 크기는 각장 50-180 mm 이었다. 세 지수의 범위는 67.48-140.61(CL-vol), 74.67-118.02(Cl-wt), 1.40$^{-5}$-1.60$^{-5}$(Cl-size)였다. Cl-vol은 Cl-wt, Cl-size와는 다르게 계절에 따른 유의차를 보였으며(p<0.05) 8월에 가장 높은 수치를 보였다. 그러므로 패각내 부피를 이용한 Cl는 홍합의 상태를 제시하는데 있어 가장 효율적인 것으로 사료된다.

• 대한수의학회지
• /
• 제36권1호
• /
• pp.247-254
• /
• 1996

Serial ultrasonographic examinations were performed on 9 pregnant Korea Jin-do dog from days 15 to 60 to determine the size of gestational structures throughout pregnancy. Gestational age was timed from the day of ovulation (Day 0), which was estimated to occur when plasma progesterone concentration was first increased above 4.0 ng/ml. Extra-fetal structures were measureable from days 17 to 49. Outer uterine diameter increased from $7.0{\pm}0.7$ ($mean{\pm}SD$)mm at day 17 to $54.0{\pm}2.2mm$ at day 49 and inner chorionic cavity diameter increased from $3.0{\pm}0.7mm$ at day 17 to $37.5{\pm}0.6mm$ at day 49. Uterine wall thickness increased from $2.8{\pm}0.4mm$ at day 17 to $8.3{\pm}0.5mm$ at day 49, placental thickness increased from $1.0{\pm}0.1mm$ at day 22 to $5.7{\pm}0.2mm$ at day 49 and length of chorionic cavity or zonary placenta increased from $5.5{\pm}1.3mm$ at day 20 to $52.3{\pm}2.2mm$ at day 49. Inner chorionic cavity diameter, outer uterine diameter and placental length each increased at a linear rate through day 37, after which time, each had a marked plateau in growth. Of the extra-fetal structures, inner chorionic cavity diameter was the most accurate for estimation of gestational age until day 37. Fetal structures were measureable from days l7 to 60. Crown-rump length, increased from $3.0{\pm}0.7mm$ at day 22 to $118.7{\pm}3.1mm$ at day 49, fetal body diameter increased from $4.0{\pm}0.7mm$ at day 25 to $55.8{\pm}1.7mm$ at day 60 and fetal head diameter increased from $4.3{\pm}0.6mm$ at day 26 to $29.8{\pm}0.8mm$ at day 60. Of the fetal structures, fetal head diameter was the most accurate for estimation of gestational age from day 37 until day 60.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.399-402
• /
• 2009

로켓엔진 연소기의 음향 불안정 억제를 위해 헬름홀츠 공명기의 음향학적 최적 설계 설계조건을 실험적, 해석적으로 연구하였다. 표준 음향시험 절차에 따라 음향파관에 공명기를 장착하여 음향파응답 신호를 측정하였다. 측정된 신호를 토대로, 흡음계수를 계산하였고, 이로부터 공명기의 음향감쇠 성능을 파악하였다. 헬름홀츠 공명기를 스프링-댐퍼 시스템으로 상사하여, 음향학적 감쇠성능을 이해하였다. 헬름홀츠 공명기의 설계변수로 목의 길이와 공동의 크기 등을 선택하였다. 공동의 크기가 커질수록 흡음성능이 증가하였고, 목 길이가 길어질수록 흡음성능이 감소하였다.

• 전자공학회논문지A
• /
• 제30A권10호
• /
• pp.27-32
• /
• 1993

Separate-confinement hetero-structure (SCH) broad area Laser Diodes (LD's) were fabricated from $Al_{0.07}$Ga$_{0.93}$/. As single-quantum-well (SQW) grown by metal organic chemical vapor deposition (MOCVD). Under pulsed operation, we obtained maximum output powers of about 0.8watt/facet and 1.83watt/facet from LD's with 60$\mu$m and 160$\mu$m channel width, respectively, without facet coatings. The differential quantum efficiency of the 60$\mu$m wide LD was about 21.7%/facet and its threshold current density was about 1k [A/cm$^{2}$]. The differential quantum efficiency of the 160$\mu$m wide LD was about 25.6%/facet and its threshold current density was about 1k[A/cm$^{2}$]. The minimum threshold current density of 60$\mu$m wide LD's was 620[A/cm$^{2}$] when the cavity length was 603$\mu$m and the minimum threshold current density of 160$\mu$m wide Ld's was 675[A/cm$^{2}$] when the cavity length was 752$\mu$m. The internal quantum efficienty and the internal loss of both LD's were 92.3% and 18.1cm$^{1}$, respectively.

• 한국전산유체공학회지
• /
• 제17권1호
• /
• pp.78-85
• /
• 2012

Cavitation causes a great deal of noise, damage to components, vibrations, and a loss of efficiency in devices, such as propellers, pump impellers, nozzles, injectors, torpedoes, etc., Thus, cavitating flow simulation is of practical importance for many engineering systems. In this study, a two-phase flow solver based on the homogeneous mixture model has been developed. The flow characteristics around an axisymmetric cylinder were calculated and then validated by comparing with the experimental results in the cavitation water tunnel at the Korea Ocean Research & Development Institute. The results show that this solver is highly suitable for simulating the cavitating flows. After the code validation, the cavity length with changes of water depth, angle of attack and velocity were obtained.. Cavitation inception was also calculated for various operational conditions.

• 한국전산유체공학회지
• /
• 제19권2호
• /
• pp.17-23
• /
• 2014

Cavitation causes a great deal of noise, damage to components, vibrations, and a loss of efficiency in devices, such as propellers, pump impellers, nozzles, injectors, torpedoes, etc. Thus, the cavitating flow simulation is of practical importance for many engineering systems. In the present work, a two-phase flow solver based on the homogeneous mixture model has been developed. The solver employs an implicit preconditioning, dual time stepping algorithm in curvilinear coordinates. The flow characteristics around Clark-Y hydrofoil were calculated and then validated by comparing with the experimental data. The lift and drag coefficients with changes of angle of attack and cavitation number were obtained. The results show that cavity length and lift, drag coefficient increase with increasing angle of attack.