• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.2
• /
• pp.67-72
• /
• 2012

In recent days, the wire width of IC is narrowed and the degree of integration of IC is increased to obtain the higher capacity of the devices in electronic industry. And then the surface quality of FCCL(Flexible Copper Clad Laminate) became increasingly important. Surface defects on FCCL are bump, scratch, dent and so on. In particular, bumps cause low reliability of the products. Even though there are bumps on the surface, if leveling characteristic of plating solution is good, it does not develop significant bump. In this study, the leveling characteristics of additives are investigated. The objective of study is to improve the leveling characteristic and reduce the surface step through additives and plating conditions. The additives in the electrodeposition bath are critical to obtain flat surface and free of defects. In order to form flat copper surface, accelerator, suppressor and leveler are added to the stock solution. The reason for the addition of leveler is planarization surface and inhibition of the formation of micro-bump. Levelers (SO(Safranin O), MV(Methylene Violet), AB(Alcian Blue), JGB(Janus Green B), DB(Diazine Black) and PVP(Polyvinyl Pyrrolidone) are used in copper plating solution to enhance the morphology of electroplated copper. In this study, the nucleation and growth behavior of copper with variation of additives are studied. The leveling characteristics are analyzed on artificially fabricated Ni bumps.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.6
• /
• pp.149-159
• /
• 2017

There are many studies on the health and protection of Old-growth and Giant Trees, concentrating on empirical judgment and basic protection measures. The problem this study addresses is the relative importance and priority of the health evaluation indicators of Old-growth and Giant Trees. Firstly, this study exports the evaluation indicators of Old-growth and Giant Trees. The evaluation system for the degree of danger of Old-growth and Giant Trees are composed of two layers: 5 fields and 46 indicators. Secondly, using the AHP and PCA method can determine the weight of each field and each index factor. The process of AHP establishes the relative importance judgment matrix of each field and fully proves that the main cause of danger is individual aging. The PCA method suggested that trunk rot status, light conditions, tree surgeries, bacterial diseases, and soil moisture level are the most important factors in each field. These aspects should be given priority in the management and protection of Old-growth and Giant Trees. Weight values obtained in this study seemed to be useful in the evaluation of Old-growth and Giant Trees.

• The Journal of Engineering Geology
• /
• v.27 no.2
• /
• pp.125-132
• /
• 2017

Approximately 64 percent of Korean territory is covered with mountains, and there is occurred a continuous mountain disaster such as landslide, debris flow and slope failure around mountain slopes due to heavy rainfall and typhoon in the summer season. Even in such a reality, the development of mountain areas is being carried out through the development and expansion of social infrastructures centered on mountain areas, but systematic management is insufficient. Constructions of a forest road facility for mountain slopes can be a cause of mountain disasters intensively in the summer season due to artificially changing the mountain area. In this unstable mountain environment, efforts to build a disaster-resistant environment are urgently needed. This research is to analyze the stability of mountain slopes according to soil depth (1~5 m) and mountain slope ($20{\sim}60^{\circ}$) considering the characteristics of rainfall infiltration under extreme rainfall conditions. As a result, the stability of the mountain slope was found to be different according to the depth of soils and the saturation area of the soil layer. As well as the stability of the mountain area was found to be lower than that of the natural mountain area. Specially, rainfall infiltration occurs at the upper slope of the forest road. For this reason, the runoff phenomenon of rainfall infiltration water occurs clearly when the depth of soil layer is low.

• Ecology and Resilient Infrastructure
• /
• v.2 no.2
• /
• pp.167-176
• /
• 2015

The water quality of the Gulpo Stream flowing through Incheon, Bucheon, Seoul, and Kimpo is getting worse due to a slow flow rate and bank constructions by stream channelization as well as an inflow of pollutants from living-sewages and factory-sewages. Besides, a dry stream phenomenon caused by a lack of maintenance water upstream makes a self-purification system worse, and the water quality of the Gulpo Stream is currently at its lowest level. The accumulated sludge of the streambed is mostly formed by the deposition of particle pollutants due to the slow flow rate and an artificially straightened stream channel. This accumulated sludge adsorbs a great quantity of organic materials and heavy metals. Because of the internal contamination possibility by a re-gushing, even after the pollution source is removed, it can cause future water pollution. Without a total examination as previously recommended, it is considered difficult to accomplish practical efficiency. In conclusion, the management of periodic sediment management such as dredging would be necessary in the Gulpo Stream because sediment could be an internal pollution source of stream water under anaerobic conditions.

• Journal of Sensor Science and Technology
• /
• v.10 no.1
• /
• pp.1-8
• /
• 2001

Conventional microgyroscopes of vibrating type require resonant frequency tuning of the driving and sensing modes to achieve high sensitivity. These tuning conditions depend on each fabricated microgyroscopes, even though the microgyroscopes are identically designed. A new micromachined resonator, which is applicable to microgyroscopes with self-toning characteristics, is presented. Since the laterally driven two degrees of freedom (2DOF) resonator was designed as a symmetric structure with identical stiffness in two orthogonal axes, the resonator is applicable to vibrating microgyroscopes, which do not need mode tuning. A dynamic model of the resonator was derived considering gyroscopic application. The dynamic model was evaluated by experimental comparison with fabricated resonators. The microgyroscopes were fabricated using a simple 2-mask-process of a single polysilicon layer deposited on an insulator layer. The feasibility of the resonator as a vibrating microgyroscopes with self-tuning capability is discussed. The fabricated resonators of a particular design have process-induced non-uniformities that cause different resonant frequencies. For several resonators, the standard deviations of the driving and sensing frequencies were as high as 1232Hz and 1214Hz, whereas the experimental average detuning frequency was 91.75Hz. The minimum detuned frequency was 68Hz with $0.034mVsec/^{\circ}$ sensitivity. The sensitivity of the microgyroscopes was low due to process-induced non-uniformity; the angular rate bandwidth, however, was wide. This resonator could be successfully applicable to a vibrating microgyroscopes with high sensitivity, if improvements in uniformity of the fabrication process are achieved. Further developments in improved integrated circuits are expected to lower the noise level even more.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.1
• /
• pp.30-37
• /
• 2015

BACKGROUND: During the winter, the use of deicers was rapidly increased for reduction of traffic accidents as well as injuries in Korea, whose components are largely comprised of calcium chloride and sodium chloride. Recently, to reduce the adverse effects of chloride-deciers such as pollution of water and soil, and decrease of agricultural productivity, the attention of eco-friendly deciers have been increased. This study aimed to investigate biological effects of magnesium chloride deicer (PC-10) and organic acid deicer (EFD-1) against wheat, barley, and spinach. METHODS AND RESULTS: We examined the effect of two deciers, PC-10 and EFD-1 on the seed germination and growth of wheat, barley and spinach. EFD-1 showed higher suppression of the germination than PC-10 among tested crop seeds. In demage index of the seedlings of the crops, there was no symptoms in spinach such as spotting and color change of leaves. EFD-1 showed much stronger inhibitory effect on the germination of tested crop seeds than PC-10 when crops were exposed continuously to tested deciers in soils. The growth and shoot and root in examined crops was relatively higher in PC-10 treatment than in EFD-1 treatment when compared to the control. The biomass decrease was found in all examined conditions of deciers. PC-10 showed 23-35% reduction of biomass whereas EFD-1 exhibited 39-84% loss in all examined crops at over 2% concentration. CONCLUSION: These results suggest that the effects of deicers used in this study by inputting into soil against growing tested crops cause the reduction of germination of seeds, growth, and biomass compared to the control.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.459-468
• /
• 2019

Purpose: The cavity exploration of the lower part of the road is carried out to prevent ground-sinking. However, the detected communities cannot be identified by the cavity location and history information, such as repackaging the pavement. Therefore, the field applicability of RFID systems was evaluated in this study to enable anyone to accurately identify information. Method: During temporary recovery, tag recognition distance and recognition rate were measured according to underground burial materials and telecommunication tubes using RFID systems with electronic tag chips attached to the bottom of the rubber cap. Result: The perceived distance and perceived rate of depth for each position of the electron tag did not significantly affect the depth up to 15cm, but it did have some effect if the depth was 20cm. In addition, water effects from nearby underground facilities and rainfall are relatively small, and the effects of wind will need to be considered during the weather conditions of the road. Conclusion: The RFID tags for field application of the pavement management system store various information such as location and size of cavity, identification date, cause of occurrence, and surrounding underground facilities to maximize cavity management effect with a system that can be computerized and mobile utilization.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.67-76
• /
• 1969

The reduced pressure storage of apple, American Summer Pairman, was investigated comparing with the other storage methods and the following results were obtained. 1. The reduced pressure storage was better to extend the storage life and freshness of apples than the controlled atomoshere storage. 2. Decreasing the pressure of chamber atmosphere to about 20 cmHg showed the best result among several pressure conditions. 3. As for the surface treatment of the apples, poly-ethylene film wrapping showed to be the most favorable method in a short-term experiment. In a long-term experiment, however, poly-ethylene film wrapping seemed to cause apples rot. Poly-vinyl acetate coating seemed to keep the apples from color changing, but it caused an unpleasant odor and a peculiar taste. No significant effect was observed in Gibberellin. 4. Total sugar and reduced sugar of apples were decreased after a certain period of increasing. Acid and Vitamin C, however, gradually decreased from the beginning of storage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.346-353
• /
• 2016

In the design conditions of some research reactors, the siphon phenomenon can cause continuous efflux of water during pipe rupture. A siphon breaker is a safety device that can prevent water efflux effectively. However, the analysis of the siphon breaking is complicated because many variables must be included in the calculation process. For this reason, a simulation program was developed with a user-friendly GUI to analyze the siphon breaking easily. The program was developed by MFC programming using Visual Studio 2012 in Windows 8. After saving the input parameters from a user, the program proceeds with three steps of calculation using fluid mechanics formulas. Bernoulli's equation is used to calculate the velocity, quantity, water level, undershooting, pressure, loss coefficient, and factors related to the two-phase flow. The Chisholm model is used to predict the results from a real-scale experiment. The simulation results are shown in a graph, through which a user can examine the total breaking situation. It is also possible to save all of the resulting data. The program allows a user to easily confirm the status of the siphon breaking and would be helpful in the design of siphon breakers.

• Tunnel and Underground Space
• /
• v.8 no.4
• /
• pp.307-320
• /
• 1998

Tunnel lining is the final support of a tunnel and reflects the results of the interaction between ground and support system. Recently it is very difficult to support and manage the tunnel because the cracks on tunnel lining cause many problems in supporting and managing tunnels. Therefore the analysis of the cracks is quite strongly required. In this study, mechanical behaviour of a tunnel lining was examined by model tests and by numerical analyses. Especially the model test was examined for double linings including shotcrete and concrete lining. The model tests were carried out under various conditions taking different loading shapes, horizontal stresses, thicknesses of linings and double lining, vault opening behind the concrete lining and rock-like medium surrounding the lining. Due to horizontal stress, compressive stress prevailed on the lining. Thus the bearing capacity of the lining increased. The existence of a vault opening behind the concrete lining reduced the bearing capacity by the similar amount of reduction of concrete lining thickness. Rock-like medium cast around the side wall of the lining restrained the deflection of the lining, and the bearing capacity for cracking and failure increased vary much. In numerical analyses a algorithm which can analysis the double lining by introduction of interface element was developed. And the results of the numerical analyses were compared with the results of the model tests.