• Journal of Electrochemical Science and Technology
• /
• 제8권2호
• /
• pp.133-145
• /
• 2017

Palm oil production is among the highest worldwide, and it has been mainly used in the food industry and other commodities. Currently, a lot of palm oil production has been destined for the synthesis of biodiesel; however, its use in applications other than the food industry has been questioned. Thereby for a sustainable development, in this paper the use of palm oil of low quality for corrosion inhibitors synthesis is proposed. The performance of the synthesized inhibitors was evaluated by using electrochemical techniques such as open circuit potential measurements, linear polarization resistance and electrochemical impedance spectroscopy. The results indicate that the fatty amides from palm oil are excellent corrosion inhibitors with protection efficiencies greater than 98%. Fatty amides molecules act as cathodic inhibitors decreasing the anodic dissolution of iron. When fatty amides are added, a rapid decrease in the corrosion rate occurs due to the rapid formation of a molecular film onto carbon steel surface. During the adsorption process of the inhibitor a self-organization of the hydrocarbon chains takes place forming a tightly packed hydrophobic film. These results demonstrate that the use of palm oil for the production of green inhibitors promises to be an excellent alternative for a sustainable use of the palm oil production.

• Journal of Electrochemical Science and Technology
• /
• 제8권2호
• /
• pp.155-161
• /
• 2017

Carbon felts were prepared under various thermal conditions to improve the electrochemical properties of vanadium redox flow batteries. The number of C-O and/or C-OH functional groups on the surface of the electrodes treated under airless conditions was much larger than that of the untreated and partially oxygen-treated electrodes. The carbon felt treated under airless conditions had the lowest surface area. The overall kinetic properties of the redox reaction were greatly improved for the carbon felt treated under airless conditions; i.e., the reversibility of the anodic and cathodic reactions associated with the $VO_2{^+}/VO^{2+}$ couple became more reversible. Single-cell tests indicated that the carbon felt exhibited an excellent discharge capacity of $3.1Ah{\cdot}g^{-1}$ at $40mA{\cdot}cm^{-2}$, and the corresponding Coulombic, voltage, and energy efficiencies were 89.5%, 91.8%, and 82.2%, respectively.

• 자원리싸이클링
• /
• 제10권6호
• /
• pp.9-14
• /
• 2001

폐리튬이온전지의 재활용 일환으로 양극활물질인 $LiCoO_2$로부터 Co와 Li을 회수하기 위하여 황산침출거동을 조사하였다. 황산 2M용액, $75^{\circ}C$ 조건에서 환원제를 첨가하지 않은 경우, $LiCoO_2$로부터 Li가 거의 100% 침출되는 반면에 Co는 같은 조건에서 40% 이하의 침출율을 보였다. Co의 침출율을 향상시키기 위하여 과산화수소를 환원제로 2~20 vol%범위에서 사용하였다 10 vol% 이상의 과산화수소를 첨가하였을 때, Co와 L거 침출율은 모두 95% 이상 이었다. 이는 환원제로서 과산화수소가 Co(III)를 Co(II)로 환원시켜 침출이 용이해졌기 때문으로 생각된다. 황산농도, 온도, 과산화수소 첨가량이 증가함에 따라 Co와 L리 침출율은 증가한 반면에 초기 광액농도가 증가할수록 Co와 L긴 침출율은 감소하였다. 이상의 조업변수 실험을 통하여 코발트계 리튬이온전지의 양극활물질인 $LiCoO_2$의 황산침출에서 황산농도 2 M, 침출온도 $75^{\circ}C$,초기광액농도 100 g/L, 과산화수소 첨가량 20 vol%에서 30분의반응시간이 침출 최적조건으로 생각된다.

• 한국재료학회지
• /
• 제19권5호
• /
• pp.233-239
• /
• 2009

The electrocatalytic behavior of the PtCo catalyst supported on the multi-walled carbon nanotubes (MWNTs) has been evaluated and compared with commercial Pt/C catalyst in a polymer electrolyte membrane fuel cell(PEMFC). A PtCo/MWNTs electrocatalyst with a Pt:Co atomic ratio of 79:21 was synthesized and applied to a cathode of PEMFC. The structure and morphology of the synthesized PtCo/MWNTs electrocatalysts were characterized by X-ray diffraction and transmission electron microscopy. As a result of the X-ray studies, the crystal structure of a PtCo particle was determined to be a face-centered cubic(FCC) that was the same as the platinum structure. The particle size of PtCo in PtCo/MWNTs and Pt in Pt/C were 2.0 nm and 2.7 nm, respectively, which were calculated by Scherrer's formula from X-ray diffraction data. As a result we concluded that the specific surface activity of PtCo/MWNTs is superior to Pt/C's activity because of its smaller particle size. From the electrochemical impedance measurement, the membrane electrode assembly(MEA) fabricated with PtCo/MWNTs showed smaller anodic and cathodic activation losses than the MEA with Pt/C, although ohmic loss was the same as Pt/C. Finally, from the evaluation of cyclic voltammetry(CV), the unit cell using PtCo/MWNTs as the cathode electrocatalyst showed slightly higher fuel cell performance than the cell with a commercial Pt/C electrocatalyst.

• Corrosion Science and Technology
• /
• 제7권1호
• /
• pp.16-21
• /
• 2008

A non-phosphorous program employing an alkyl epoxy carboxylate (AEC) has been successfully applied to petrochemical and other large industrial open recirculating cooling water systems. AEC is a patented non-phosphorous calcium carbonate scale inhibitor that has demonstrated better scale inhibition abilities than traditional organic phosphonates. In addition to its antiscalant properties, AEC inhibits carbon steel corrosion when used at high dosages. AEC can be combined with zinc to form a non-phosphorous program with very low levels of phosphate to provide an environmentally acceptable program. In actual applications, the total phosphate developed in the cooling system from cycling the makeup is below 1 ppm as $PO_4$. This level has complied with the highest standards of wastewater discharge limitations. The performance of two AEC/Zinc applications is reviewed. In both cases excellent corrosion and scale control were achieved with AEC/Zinc programs. One case history details the performance with a low hardness water (100 ppm calcium, as $CaCO_3$) operating at 8-10 cycles of concentration. The corrosive nature of the water and the long retention time of the system stressed both the corrosion and scale control capabilities of the program. The second case history demonstrates the performance of the program with a moderate hardness water (400-600 ppm calcium, as $CaCO_3$), but under harsh conditions of high temperature and low flow. The AEC/zinc combination has been found to be highly effective in controlling the corrosion of ferrous metals. AEC can provide good corrosion inhibition at high concentrations, while zinc is known to be an excellent cathodic inhibitor. The combination of the two inhibitors not only provides a synergistic blend that is effective over a wide range of operating conditions, but also is environmentally friendly.

• 한국재료학회지
• /
• 제15권8호
• /
• pp.528-535
• /
• 2005

It is inclined to increase that use of hazardous substances such as lead(Pb), mercury (Hg), cadmium(Cd) etc. are prohibited in the electronics according to environmental friendly policies of an advanced nation for protecting environment of earth. As this reasons, many researches for ensuring the reliability were proceeding in Pb free soldering process. n the flux remains on the PCB(printed circuit board) in the soldering process or the electronics exposed to corrosive environment, it becomes the reasons of breakdown or malfunction of the electronics caused by corrosion. Therefore in this studies we researched the polarization and Tafel properties of Sn40Pb and SnCu system solders based on the electrochemical theory. The experimental polarization curves were measured in distilled ionized water and 1 mole $3.5 wt\%$ NaCl electrolyte of $40^{\circ}C$, pH 7.5. Ag/AgCl and graphite were utilized by reference and counter electrodes, respectively. To observe the electrochemical reaction, polarization test was conducted from -250mV to +250mV. From the polarization curves composed of anodic and cathodic curves, we obtained Tafel slop, reversible electrode potential(Ecorr) and exchange current density((cow). In these results, we compared the corrosion rate of SnPb and SnCu solders.

• 한국재료학회지
• /
• 제15권8호
• /
• pp.536-542
• /
• 2005

Recently European Council(EU) published the RoHS(restriction of the use of certain hazardous substances in electrical and electronic equipment) which is prohibit the use of Pb, Hg, Cd, $Cr^{+6}$, PBB or PBDE in the electrical and electronic equipments. So EU member States shall ensure that, from 1 July 2006, new electrical and electronic equipment put on the market does not contain 6 hazardous substances. The one of the most important in electronics manufacturing process is soldering. Soldering process use the chemical substances which are applied in fluxing and cleaning processes and it can generate the malfunction of electronics caused by corrosion in the fields conditions. Therefore this study researched on the polarization and Tafel properties of Sn40Pb and Sn3.0Ag0.5Cu(SAC) solder based on the electrochemical theory. We prepared SnPb specimens which was aged in $150^{\circ}C,\;180^{\circ}C$ for 15 minutes ana Sn3.0Ag0.5Cu specimens that was aged in $180^{\circ}C,\;220^{\circ}C$ for 10 minutes. Experimental polarization curves were measured in distilled ionized water and $3.5 wt\%$, 1 mole NaCl electrolyte of $40^{\circ}C$, pH 7.5. Ag/AgCl and graphite were utilized by reference and counter electrode, respectively. To observe the electrochemical reaction, polarization test was conducted from -250 mV to +250 mV. From the polarization curves that were composed of anodic and cathodic curves, we obtained Tafel slop, reversible electrode potential(Ecorr) and exchange current density(Icorr). In these results, corrosion rate for two specimen were compared Sn3.0Ag0.5Cu with SnPb solders

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.104-104
• /
• 2016

음극아크증착과 스퍼터링을 동시에 사용한 하이브리드 공정으로 제조된 TiAlSiN 코팅층의 물성을 평가하였다. TiAlSiN 코팅층은 음극아크 소스에 Ti-Al 타겟을 장착하고 스퍼터링 소스에는 Si 타겟을 장착하여 아르곤과 질소 가스의 혼합가스 분위기에서 스테인리스(SUS304)와 초경(cemented carbide; WC-15wt.%Co) 기판 위에 제조되었다. 음극아크 소스에 인가되는 전류는 고정하고 스퍼터링 소스에 인가되는 전력을 조절하여 TiAlSiN 코팅층의 Si 함량을 제어하였다. TiAlSiN 코팅층의 Si 함량이 증가하면 코팅층의 구조가 주상정에서 비정질 구조로 변화한다. 이는 Si 함량이 증가하면 코팅층에 형성되는 알갱이 구조의 크기가 줄어들기 때문이다. X-선 회절 결과와 Scherrer's equation을 이용하여 Si 함량에 따른 알갱이 구조의 크기를 계산하면 Si이 없는 코팅층은 약 14 nm의 크기를 보이며 8 at.% 이상의 함량에서 약 2.5 nm로 포화된다. TiAlSiN 코팅층의 경도를 Si 함량에 따라 측정하면 Si 함량이 증가하면 경도도 증가하는 경향을 보이며 약 9 at.%의 Si 함량에서 3200 Hv로 최대가 되고 이후에는 감소한다. TiAlSiN이 코팅된 스테인리스 시편을 대기에서 열처리하고 시편 무게증가를 측정하여 코팅층의 내열성을 평가하였다. Si 함량이 증가하면 내열성도 향상되는데 14.4 at.%의 Si 함량에서 $700^{\circ}C$까지 무게 증가가 없으며 $900^{\circ}C$까지 0.43 mg의 증가를 보인다. 본 실험을 통해서 얻어진 TiAlSiN 코팅층은 비교적 높은 경도와 내열성을 확보하여 절상공구 보호막 코팅 소재 등으로 활용이 가능할 것으로 판단된다.

• 한국표면공학회지
• /
• 제18권4호
• /
• pp.153-163
• /
• 1985

In the electroless nickel plating bath which contained nickel sulfate, sodium hypophosphite, boric acid and triethanolamine, effect of their concentration on the rate of deposition was tested by gravimetric method and polarization method. The polarization method that polarize small range of voltage anodicaly and cathodicaly at the mixed potential in the electroless plating bath can calculate mixed current (depositing rate) from $i_{mp}=\frac {i}{\eta}\;\frac{RT}{nF}\;or\;i_{mp}=\frac{i}{\eta}\;\frac{1}{2.3}(\frac{b_a\;\;b_c}{b_c+b_a})$ Where $i_{mp}$ is the depositing current, i is the polarized current, ${\eta}$ is the polarized voltage, $b_a\;and\;b_c$ are the Tafel slop of anodic and cathodic polarization curves respectively. The calculated mixed current ($i_{mp}$) is proportional to the depositing rate obtained by gravimetric method and corresponded mostly to the real depositing rate by multifying supplementary constant. The polarization method can be used for founding inclination of reaction on various concentration of each composition. Decreasing or increasing concentration of triethanolaminc as a complexing agent , the depositing rate is decreased and when the bath contained 25-50mL/L of triethanoloamine, the depositing rate is increased. The depositing rate is increased with increasing the concentration of boric acid, and when the bath contained 0.5M of boric acid, the depositing rate is increased abruptly. The optimum composition of the electroless nickel bath was estimated 0.1M of nickel sulfate, 0.25M of sodium hypophosphite, 0.5M of boric acid, and 25-50mL/L of triethanalamine.

• 대한화학회지
• /
• 제37권1호
• /
• pp.83-91
• /
• 1993

염기성 용액에서 가벼운 란탄족 원소 착물의 전기화학적 거동을 직류(DC), 펄스차이 폴라로그래피(DPP), 순환전압전류법(CV) 및 정전위 전기분해법으로 조사하였다. 란탄이온들은 NaCl 지지전해질에서 o-cresolphthalexon(OCP)과 1:1로 배위하였으며, 전극반응은 2단계 1전자 환원반응이었다. 착물의 반파전위는 pH에 따라 변화하였으며 환원전류는 흡착성을 나타냈다. DC 및 CV에서 첫번째 1전자 환원반응은 유사가역적 거동을 나타냈으며, 환원 뒤에 형성된 음이온 라디칼은 이합체와 반응을 하였다. 두번째 환원파는 전자전이 반응에 이어 생성된 카르보 음이온의 빠른 양성자 첨가반응으로 비가역적 거동을 나타냈다. -1.80V에서 정전위 전해시간이 증가함에 따라 착물의 질은 청색은 점점 옅어져서 무색이 되었으며, 최종생성물은 전기적으로 비활성이었다. 따라서 Ln-OCP 착물의 단계적인 전극반응은 ECEC 메카니즘으로 제안되었다.