• 청정기술
• /
• 제15권3호
• /
• pp.147-153
• /
• 2009

폐삼원촉매를 초음파세척 후 활성성분을 재함침하여 촉매를 재제조 하였으며 여러가지 조건에서 재제조한 촉매의 활성과 표면특성을 분석하였다. 초음파세척을 통해 재제조한 경우, 폐촉매 표면의 오염물질을 제거하는 데에 필요한 최적시간은 약 5분임을 알 수 있었다. 활성성분의 적절한 재함침량에 대하여 검토하였으며 탄화수소화합물(THC), 일산화탄소(CO), 및 질소산화물(NOx)의 전환활성을 확인하기 위하여 다양한 온도범위에서 촉매의 성능실험을 수행하였다. 실험결과로부터 NOx 전환활성을 제외한 THC 및 CO의 전환환성은 신촉매의 전환활성과 거의 같은 수준까지 회복되는 것을 알 수 있었다.

• 분석과학
• /
• 제18권5호
• /
• pp.436-443
• /
• 2005

활성탄 미분을 용액계에 분산하므로 수반 되는 결과를 고찰하기 위하여 칼륨처리 미분 활성탄의 물리적 성질과 그들에 응용에 대한 연구를 수행하였다. 오염수로부터 오염물질의 촉매적 제거 효율을 연구하기 위하여 분산매로써 두 종류의 칼륨 미분 활성탄을 사용하였다. 칼륨염을 포함하는 수용액내에서 처리된 활성탄 시료로부터 얻어진 표면 특성화를 위하여, 흡착 등온곡선 형태, SEM, EDX 및 표면 기능기 변화 등을 주된 연구 대상으로 하였다. pH 변화에 따른 칼륨 미분 활성탄을 오염수에 분산하여 색도, COD, T-N 및 T-P 등에 대하여 제거 효율을 연구하였다. 칼륨 미분 활성탄을 처리한 오염수에 대한 네 가지 요소 제거 결과로부터, pH 6~8의 범위에서 만족할 만한 제거 효율이 얻어 졌다. 본 연구로부터 칼륨 처리 미분 활성탄의 분산에 의한 오염물질의 제거 효율이 흡착 특성 및 촉매적 효율에 의하여 입증되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.403.2-403.2
• /
• 2016

Porous materials play a significant role in energy storage and conversion applications such as catalyst support for polymer electrolyte membrane fuel cell. In particular, hierarchical porous materials with both micropores (poresize, ${\delta}$ < 2 nm) and regularly arranged mesopores (2 nm < ${\delta}$ < 50 nm) are known to greatly enhance the efficiency of catalytic reactions by providing enormous surface area as well as fast mass transport channels for both reactants and products from/to active sites. Although it is generally agreed that the microscopic structure of the porous materials directly affects the performance of these catalytic reactions, neither detailed mechanisms nor fundamental understanding are available at hand. In this study, we propose an atomistic model of hierarchical nanostructured porous carbons (HNPCs) in molecular dynamics simulations. By performing a systematic study, we found that structural features of the HNPC can be independently altered by tuning specific synthesis parameters, while remaining other structures unchanged. In addition, we show some structure-property relations including mechanical and gas transport properties.

• Bulletin of the Korean Chemical Society
• /
• 제23권5호
• /
• pp.721-726
• /
• 2002

Two new C2-symmetric chiral $\alpha-$ and w-Diimines incorporating bulky ferrocenylethylamine and their copper(I)complexes have been synthesized and characterized by analytical and various spectroscopic techniques. The catalytic activities of these complexes have been tested in the asymmetric cyclopropanation of a series of olefins with some diazoacetates to achieve varying degree of dia- and enantio-selectivities depending on the nature of the ligand, the substrates, and the reagents. Some mechanistic implication has been made with regard to the interactions among all these chemical species.

• 대한기계학회논문집A
• /
• 제26권3호
• /
• pp.445-451
• /
• 2002

The refractory-lined pipe is used to protect the system from high-temperature of the internal flow. The property of the refractory has an effect upon the stress analysis for fluid catalytic cracking(FCC) unit piping design. The equivalent elastic modulus and density considering steel and refractory must be applied in the stress analysis of the system. In the research, the theoretical method to obtain the value of the equivalent property is introduced and then the parametric analysis is carried out to understand the characteristic of the material properties, and the stress analysis is performed with reactor, the part of FCC unit.

• Carbon letters
• /
• 제5권4호
• /
• pp.186-190
• /
• 2004

In this work, a nickel metal (Ni) electroplating on the activated carbon fiber (Ni/ACFs) surfaces was carried out to remove the toxic hydrogen chloride (HCl) gas. The surface properties of the treated ACFs were determined by using nitrogen adsorption isotherms at 77 K, SEM, and X-ray diffraction (XRD) measurements. HCl removal efficiency was confirmed by a gas-detecting tube technique. As a result, the nickel metal contents on the ACF surfaces were increased with increasing the plating time. And, it was found that the specific surface area or the micropore volume of the ACFs studied was slightly decreased as increasing the plating time. Whereas, it was revealed that the HCl removal efficiency containing nickel metal showed higher efficiency values than that of untreated ACFs. These results indicated that the presence of nickel metal on the ACF surfaces played an important role in improving the HCl removal over the Ni/ACFs, due to the catalytic reactions between nickel and chlorine.

• Journal of Electrochemical Science and Technology
• /
• 제4권3호
• /
• pp.89-92
• /
• 2013

Poly (3,4-ethylenedioxythiophene) (PEDOT) polymers with different electric conductivities were synthesized directly on a FTO substrate via a chemical polymerization method and applied as a platinum (Pt)-free counter electrode for dye-sensitized solar cells (DSSCs). The catalytic properties of the PEDOT as a function of electrical conductivity were studied using cyclic voltammograms, J-V measurements and impedance spectroscopy. The PEDOT counter electrode with around 340 S/cm conductivity exhibited the best performance as a counter electrode for tri-iodide reduction. The ability to modulate catalytic activity of PEDOT with changes in conductivity shows one of promising routes for developing new counter electrode of Pt-free DSSCs.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.176.1-176.1
• /
• 2014

Graphene has attracted an increasing attention due to its extraordinary electronic, mechanical, and thermal properties. Especially, the two dimensional (2D) sheet of graphene with an extremely high surface to volume ratio has a great potential in the preparation of multifunctional nanomaterials, as 2D supports to host metal nanoparticles (NPs). Copper oxide is widely used in various areas as antifouling paint, p-type semiconductor, dry cell batteries, and catalysts. Although the copper oxide(II) has been well known for efficient catalyst in C-N cross-coupling reaction, copper oxide(I) has not been highlighted. In this research, CuO and Cu2O nanoparticles (NPs) dispersed on the surface of grapehene oxide (GO) have been synthesized by impregnation method and their morphological and electronic structures have been systemically investigated using TEM, XRD, and XAFS. We demonstrate that both CuO and Cu2O on graphene presents efficient catalytic performance toward C-N cross coupling reaction. The detailed structural difference between CuO and Cu2O NPs and their effect on catalytic performance are discussed.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.93-93
• /
• 2011

Nanostructures consisting of $TiO_2$ particles as a core and carbon as a shell ($TiO_2$@C) were prepared by heat treatment of $TiO_2$ nanoparticles at high temperature in a methane atmosphere. X-ray diffraction and transmission electron microscopy showed that a carbon shell layer was formed well. These structures were used as supports for platinum nanoparticles and the hybrid particles exhibit improved catalytic activity and stability toward ORR compared to Pt on a carbon black (Vulcan XC-72R). It is likely that enhanced catalytic properties of the Pt on $TiO_2$@C could be due to the stability of the core-shell support in comparison with carbon black support.

• Bulletin of the Korean Chemical Society
• /
• 제35권4호
• /
• pp.1091-1097
• /
• 2014

Tageteserecta flower like zinc oxide nanostructures composed of hexagonal nanorods were synthesized via sonochemical method at room temperature. The synthesized nanomaterials exhibited wurtzite hexagonal phase structure with the single crystalline nature. The diameter of the individual nanorods that constitute the flower shaped zinc oxide structures is in the range of 120-160 nm. The sonication time effectively determined the morphological properties of the prepared materials. The catalytic activity of prepared zinc oxide nanostructures towards N-formylation reactions were evaluated without any surface modification and the nanostructures exhibited good reaction yield with the prompt recyclability behavior.