• Korean Chemical Engineering Research
• /
• 제44권4호
• /
• pp.363-368
• /
• 2006

$C_9$-알데히드를 수소화하여 $C_9$-알콜을 제조하는 공정에 사용하기 위한 최적의 촉매를 선정하고, $C_9$-알콜의 수율을 극대화하기 위한 운전 조건을 확립하기 위한 실험을 수행하였다. 구리 전구체로 acetate를 사용하고 침전제로 $Na_2CO_3$를 사용하여 제조한 $CuO/ZnO/Al_2O_3$(60:30:10 wt％) 촉매의 표면적 및 구리 비표면적이 가장 우수하였으며 $C_9$-알데히드 수소화 반응에서도 가장 우수한 성능을 보였다. 최적화된 촉매를 장착한 trickle bed 반응기를 사용하여 $175^{\circ}C$, 800 psi, $WHSV=3hr^{-1}$의 조건에서 94.1 wt％의 $C_9$-알콜 수율을 얻었다. 알데히드의 수소화 반응에 사용되는 다른 촉매들과 비교한 결과 Ni/kieselghur 촉매와 유사한 성능을 보였으며 $Cu-Ni-Cr-Na/Al_2O_3$ 촉매 및 $Ni-Mo/Al_2O_3$ 촉매의 경우보다 우수한 성능을 보이는 것을 확인하였다. 장기 촉매 테스트를 통해서 촉매의 안정성을 확인한 결과 약 72시간 이후에는 고비점 부산물의 생성량 증가로 인하여 $C_9$-알콜의 수율이 약간씩 감소하였다.

• 한국추진공학회지
• /
• 제11권4호
• /
• pp.67-73
• /
• 2007

최근에 친환경 로켓 추진제로 과산화수소가 새로운 관심을 받게 됨에 따라 이에 대한 연구를 수행하기 위해 은을 촉매로 사용한 과산화수소 단일추진제 추력기와 시험설비를 개발하였다. 본 논문에서는 설계 제작된 추력기와 시험설비를 소개하고, 점화시험을 통해 연소실 압력 및 온도, 점화지연 시간, 특성 배기속도 등의 추력기 성능을 분석하였다. 점화시험 결과 정상상태 운전조건에서 95%까지의 높은 특성배기속도 효율을 확인하였다.

• 에너지공학
• /
• 제20권4호
• /
• pp.298-302
• /
• 2011

In this study, Catalytic reforming with vapor and biomass gasification was simultaneously performed in a same fixed bed reactor at $600-800^{\circ}C$. Light gases were produced from reformation of the tar (fuel gases) in biomass gasification by using limonite and dolomite, as catalysts. Hydrogen and carbon dioxide are main components in light gases. Hydrogen yields increased with temperature increasing in the range of $650-800^{\circ}C$, because the water shift reaction was promoted by catalyst. The yield of hydrogen gas was increased about 160% under catalyst with the mixture of limonite and dolomite comparing to limonite only.

• 한국대기환경학회지
• /
• 제20권4호
• /
• pp.515-521
• /
• 2004

The catalytic oxidation of volatile organic compounds (methanol. acetaldehyde) has been characterized using the copper phthalocyanine catalyst in a fixed bed flow reactor under atmospheric pressure. The catalytic activity for pretreatment conditions was examined by this reaction system. The catalytic activity was ordered as follows: metal free-PC＜Cu ($\alpha$)-PC＜Cu ($\beta$)-PC The formaldehyde, carbon monoxide as a partial oxidation product of methanol and acetaldehyde over Cu ($\alpha$)-PC catalyst were detected and the conversions of methanol and acetaldehyde were accomplished above 95% over Cu ($\alpha$) -PC, Cu ($\beta$) - PC catalyst at 35$0^{\circ}C$. The pretreated metal free -PC, Cu($\alpha$)-PC, Cu($\beta$)-PC catalysts have been characterised by TGA, EA and XRD analysis. The catalytic activity pretreated with air and $CH_3$OH mixture (P-4) or air only (P-5) was very excellent. XRD and EA results showed that Cu($\alpha$)-PC, Cu($\beta$)-PC were destroyed an(1 new metal oxide such as CuO were formed.

• Environmental Engineering Research
• /
• 제10권1호
• /
• pp.31-37
• /
• 2005

The selective catalytic experiments using both sulfated/sulfur-free titania and V2O5/TiO2 catalysts have been conducted for NO reduction by NH3 in a packed-bed, down-flow reactor. The sulfated and vanadia loaded titania exhibited higher activity for NO removal than the sulfur-free catalysts, where > 90% NO removal was achieved over the sulfated V2O5/TiO2 catalyst between 280∼500 C. The surface structure of vanadia species on the catalyst surface played a critical role in the high performance of catalysts in which the existence of monomeric/polymeric vanadate is revealed by Raman spectra studies. Water vapor and SO2 were added to the reacting system for the catalyst deactivation tests. At higher temperatures (T ≥ 350 C), little deactivation was observed over the sulfated V2O5/TiO2 catalysts, showing good durability against SO2 and water vapor, which is compared with deactivation at lower temperatures.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.448-460
• /
• 2018

Copper nanoparticle-doped and graphitic carbon nanofibers-covered porous carbon beads were used as an efficient catalyst for treating synthetic phenolic water by catalytic wet air oxidation (CWAO) in a packed bed reactor over 10-30 bar and $180-230^{\circ}C$, with air and water flowing co-currently. A mathematical model based on reaction kinetics assuming degradation in both heterogeneous and homogeneous phases was developed to predict reduction in chemical oxygen demand (COD) under a continuous operation with recycle. The catalyst and process also showed complete COD reduction (>99%) without leaching of Cu against a high COD (~120,000 mg/L) containing industrial wastewater.

• 한국응용과학기술학회지
• /
• 제37권4호
• /
• pp.723-732
• /
• 2020

RHDS 촉매는 코크와 황 화합물 그리고 금속인 바나듐이 표면에 침적되어 비활성화가 된다. 이러한 오염물을 제거하기 위해서 먼저 폐 RHDS 촉매에 묻어있는 중질유분의 세정, 코크와 황 화합물을 고온 배소 처리한 후, 과량으로 침적되어 있는 바나듐의 침출량을 조절하기 위하여 0.5, 1 wt% 옥살산 수용액을 이용하여 초음파 교반기에서 50 ℃, 10 sec 동안 교반하여 NOx 저감을 위한 SCR 촉매로의 적용 가능성을 확인하고자 하였다. 재생처리 한 RHDS 촉매의 성분은 XRF 를 사용하여 분석하였고, 상압 고정층 연속 흐름 반응기 상에서 NOx 저감 성능을 측정하였다. 옥살산 수용액 0.5 wt%, 10 sec 동안 초음파 침출한 촉매가 가장 안정적인 NOx 저감 성능을 보였으며, 375 ℃ 이상의 고온에서는 상용 촉매와 동등 수준의 NOx 저감 성능을 확인할 수 있었으나 저온영역 200 ℃에서 250 ℃까지는 상용 촉매보다 낮은 NOx 저감 성능을 보였다. 따라서 폐 RHDS 촉매를 재생처리 한 후 분말로 메탈 코로게이트 지지체에 워시코팅한 촉매는 상용 SCR 촉매로서 이용 가능함을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.499-502
• /
• 2001

In this experiment, an attempt to use the sludge pellets as catalyst for NO removal from simulated gas is experimentally investigated by using cylinder type reactor and packed-bed reactor. An experimental investigation has been conducted for NO concentration of 50[ppm], 100[ppm], 200[ppm] balanced with air, a gas flow rate of 5[1/min]. Ac voltage to discharge the gases was supplied. In the result, NOx removal rate in packed bed reactor is higher than that in cylinder type reactor. it is thought that plasma density in contact point of BaTiO$_3$ is significantly higher than that in cylinder reactor.

• Korean Chemical Engineering Research
• /
• 제52권5호
• /
• pp.678-687
• /
• 2014

The catalytic performance of silicon carbide supported nickel catalysts modified with or without second metal (Co, Cu and Zn) for the methanation of CO has been investigated in a fixed-bed reactor using a feed consisting of 25% CO and 75% $H_2$ without any diluent gas. It has been found that the introduction of Co species can clearly improve the catalytic activity of Ni/SiC catalyst, whereas the addition of Cu or Zn can result in a significant decrease in the catalytic activity. The characterizations by means of XRD, TEM, XPS, CO-TPD and $H_2$-TPR indicate that the addition of Co could decrease the particle size of active metal, increase active sites on the surface of methanation catalyst, improve the chemisorption of CO and enhance the reducibility of methanation catalysts. Additionally, the special interaction between Co species and Ni species is likely favorable for the dissociation of adsorbed CO on the surface of catalyst, and this may also contribute to the high activity of 5Co-Ni/SiC catalyst for CO methanation reaction. For 5Cu-Ni/SiC catalyst and 5Zn-Ni/SiC catalyst, Cu and Zn species could cover partial nickel particles and decrease the chemisorption amount of CO. These could be responsible for the low methanation activity. In addition, a 150h stability test under 2 MPa and $300^{\circ}C$ showed that 5Co-Ni/SiC catalyst was very stable for CO methanation reaction.

• 대한화학회지
• /
• 제55권1호
• /
• pp.92-97
• /
• 2011

비닐 아세트산염 합성에 대한 1족 알칼리금속 아세트산염의 촉진 효과를 조사하였다. Pd-Au/$SiO_2$ 촉매를 사용한 경우와 사용하지 않은 경우에 대해 에틸렌과 아세트산 간의 기체상 반응에 대해 생성물 선택성과 에틸렌 전환을 비교하였다. 촉진제가 촉매 표면을 안정화시켰으며, 생성물 선택성과 에틸렌 전환을 촉진하였다. 이 촉매 효과는 1족에서 위에서 아래로 내려갈수록 증가하였다. 이것은 아세트산염의 공통이온효과 때문이다.