• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.568-570
• /
• 2009

Octadecyltrichlorosilane (OTS) self-assembled monolayer was selectively patterned by deep ultraviolet exposure, resulting in differential surface state, hydrophilic area with OTS hydrophobic surroundings. High-resolution (<10 ${\mu}m$) nanoparticulate Ag electrodes and organic semiconductors were patterned from simple dip-casting and ink-jetting on the pre-patterned hydrophilic surface, forming all solution-processed organic thin film transistors. The devices typically have shown a mobility of 0.065 $cm^2/V{\cdot}s$ and on-off current ratio of $8{\times}10^5$.

• 산업경영시스템학회지
• /
• 제28권1호
• /
• pp.24-31
• /
• 2005

The outsole mold of the shoes has been manufactured using electro-discharge machining by graphite electrode or using casting etc. The study is concerned with the pattern design for the outsole of shoes by CAD, the modeling and the generation of NC data by CAM system and the machining by CNC machining center. The ball end mill and the engraving cutter is used as cutter and the cutting conditions are adjusted according to the shapes and sizes of the cutter and part in cutting. The method showed the possibility coping with the rapid change of shoes industry and proposed the possibility for higher productivity and quality on mold-manufacturing of shoes outsole.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.217-218
• /
• 2007

Aluminum 분말과 고분자를 혼합하여 고분자-금속 복합재료(polymer-metal composite)를 만들어 copper foil과 기판의 접착력을 평가하였다. Tape casting 방법을 이용하여 sheet 만들고 vacuum lamination으로 PCB(Printed Circuit Board)기판을 제조한 후 포토공정으로 peel strength pattern을 형성하였으며, 본 연구에서는 최적의 aluminum 조건을 찾기 위하여 압력, 온도, copper foil의 표면 상태와 silane 표면 코팅에 따른 aluminum-polymer복합재료의 peel strength의 변화를 확인하였다. 최적의 조건은 silane 표면 코팅 처리를 한 aluminum 분말로 $210^{\circ}C$에서 $9.7kg/cm^2$ 압력으로 matte면의 돌기 크기가 크며, 응집이 잘 되어있는 copper foil을 사용하여 13.89N의 우수한 peel strength를 구현 할 수 있었다.

• 한국정밀공학회지
• /
• 제21권9호
• /
• pp.196-203
• /
• 2004

SL(Stereolithography) part is made by piling up thin layers which causes the stair stepping effect at the surface of SL parts. The effect brings about excessive surface roughness and cuts down the merits of using SL part. Hence, additional post-machining finishing such as traditional grinding is required. But the traditional post-machining is detrimental to part geometry and time consuming. In this study, therefore, a paraffin coating and grinding post-machining is newly proposed to improve the surface quality of SL fart. The paraffin which has suitable properties for the proposed post-machining is coated all over the part surface. By grinding the only over-coated paraffin based on boundary of the SL part surface, the surface roughness can be improved without any damage on the part. Also, it is verified that SL part finished by the proposed post-machining process can be applied for rapid tooling as pattern through manufacturing silicon rubber molding and casting test.

• 한국산학기술학회논문지
• /
• 제7권3호
• /
• pp.506-511
• /
• 2006

은은 주조성과 가공성이 뛰어나 장신구 제작에 주된 소재로 채택되어 왔다. 이런 은 소재 자체의 장점을 이용한 전통적인 방법 중 하나인 모꾸메가네는 나뭇결무늬와 같은 자연스러운 금속의 혼합문양을 표현할 수 있어서 부가가치가 높지만 제작 공정이 복잡하고 힘들어서 경제적으로 장신구를 제작하는데 어려움이 있었다. 기존의 모꾸메가네 공정 대신 은과 구리의 융점차를 이용한 변형 주조 방법과 냉간압연으로 구리와 은 두 금속간의 우수한 결합을 유지하면서도 기존의 모꾸메가네와 유사한 표면 장식 효과를 얻을 수 있는 새로운 공정을 제안해 보았다. 직경 3 mm의 구리 그래뉼과 0.5 mm, 1.5 mm 두께의 구리 판재에 순은 용탕을 부어 두 금속간의 확산 접합이 완성된 괴를 만들고, 이후 롤러 압연을 실시하여 두께 1.5 mm의 판재를 만들어서 이를 이용하여 반지 시제품을 제작한 결과, 제안된 공정으로 이종 금속 접합도가 우수하면서 모꾸메가네와 유사한 효과를 성공적으로 낼 수 있었다. 제안된 공정은 기존의 반복된 열간 가공에 의한 복잡한 모꾸메가네 공정에 비해 보다 간단하고 경제적으로 모꾸메가네 효과를 갖는 은 장신구 디자인을 가능하게 함을 확인하였다.

• 한국철도학회논문집
• /
• 제10권6호
• /
• pp.758-765
• /
• 2007

본 논문에서는 철도차량의 이동성을 기반으로 MR의 핸드오프 때 발생할 수 있는 패킷손실량을 최소화하는 방안을 제안하고자 한다. 철도차량에 탑재된 MR은 기본적으로 고정된 AR 영역을 따라 이동한다. MR이 NAR로 이동하면. PAR은 MR의 HA로부터 전송받은 패킷을 자신의 HML에 따라 NAR로 전송시킨다. 그 후 NAR은 MR의 L3 핸드 오프과정이 마칠 때 까지 PAR로부터 전송받은 패킷을 버퍼링하게 된다. 이와 같은 절차에 따라 MR의 핸드오프 소요시간 동안에는 패킷의 손실을 최소화하게 되고, 아울러 인터넷 상에 불필요한 패킷이 발생하지 않게 된다. 성능분석 결과 제안한 방안은 NEMO Basic 방안과 Bi-casting 방안보다 효율적인 방안임을 확인할 수 있었다.

• 대한치과보철학회지
• /
• 제37권6호
• /
• pp.825-834
• /
• 1999

Recently, various implant cylinders were supplied. especially received gold cylinders, cast cylinders produced from premade gold and plastic cylinders and plastic cylinders. This study measured and compared precise fit produced when using conventional gold and plastic cylinders. The comparative fit of lapped and non-lapped castings made from plastic pattern was examined. The implant/abutment interface fit was evaluated by scanning electron microscopy(SEM) for each of four cylinders. The following results were obtained: 1. The case of plastic cylinder showed $9.67{\pm}1.50{\mu}m$ gap when Steri-Oss fixture was connected. 2. The case of lapped casting made from plastic cylinder showed $3.01{\pm}2.81{\mu}m$ gap when Steri-Oss fixture was connected. 3 The case of gold/plastic cylinder showed $9.80{\pm}1.68{\mu}m$ gap when Steri-Oss fixture was connected. 4. The case of gold cylinder showed ${5.47{\pm}2.43\mu}m$ gap when Steri-Oss fixture was connected. 5. In case of each cylinder which was connected with Steri-Oss fixture, the size of gap was showed less in the order of the case of gold/plastic cylinder, the case of plastic cylinder, the case of gold cylinder and the case of lapped casting made from plastic cylinder As results of this study, the use of premade gold cylinder offers an advantage over plastic pat-terns in precise fit. When plastic patterns are used, polishing of implant cylinder components should provide precise fit.

• 한국임상수의학회지
• /
• 제39권4호
• /
• pp.156-161
• /
• 2022

The objective of the present study was to assess the prevalence, occurrence pattern, and clinical outcomes of transfixation pinning and casting (TPC) for fractures in Korean native calves, and to identify the advantages of the procedure. The study investigated 52 cases of bone fractures documented from January 2017 to December 2020. Hindlimb fractures (72%) were the most common in bone fractures (n = 50). The distribution of fractures was highest in the tibia (n = 15), followed by the metatarsal (n = 12), femur (n = 9), radius/ulna (n = 8), metacarpal (n = 3), humerus (n = 3), mandible (n = 1), and caudal vertebrae (n = 1). All cases were diagnosed via radiographic evaluation. Closed fractures (86%) were the most common, followed by open fractures (14%). Surgery was performed on 34 calves using intramedullary pin (IM pin), TPC, cross pin, flexible wire (F-wire), and/or plate fixation. The rest of the calves were treated with external coaptation (n = 12) or were not treated (n = 6). Subsequently, 24 calves with follow-up records were evaluated in the bone fracture cases (n = 50). Bone union was observed in 15 (62%) calves; 3 (12%) calves showed non-union; 4 (16%) calves were dead after surgery; and 2 (8%) calves were euthanized at the owner's request. Among the 24 follow-up surgery cases, the most successful cases were tibia fractures (75%) surgically treated using TPC and/or IM pin. These findings suggest that TPC surgery is effective in the management of fractures in Korean native calves.

• 한국주조공학회지
• /
• 제10권1호
• /
• pp.31-42
• /
• 1990

The full mould casting process in one of the newly developed techniques which has many advantages. Unbonded sand mould has been prepared for the major mould and $CO^2$ gas mould has been used occasionally for comparison. Patterns were built up with expanded polystyrene and coated with three different materials. Silica, graphite and zircon were used for the coating layer. The effects on fluidity and temperature loss of molten metals were investigated. The molten metals were Al-5% Si alloy, Cu-30% Zn alloy and gray iron of approximately 4.0% of carbon equivalent. Experimental variables were runner section area, superheat, sprue height, coating materials, coating thickness and apparent density of EPS pattern. The effects of coating materials on fluidity and temperature loss of the molten metals during transient pouring are summarized as follows : As runner section area, superheat and sprue height increased, fluidity increased. Temperature loss decreased as runner section area and sprue height increased. However, reversed effects were observed in the case of superheat increment. The coating materials decreased the fluidity of each alloy in the order of silica, graphite and zircon. Zircon brought to the highest temperature loss among the coating materials used. The fluidity increased in the order gray iron, Cu-30% Zn and Al-5% Si alloy while temperature loss in the reverse order. Especially in case of reduced pressure process, the fluidity was increased apparently. Al-5% Si alloy showed the lowest temperature loss among the alloys. The increment of the apparent density of EPS pattern resulted in the fluidity decrease and temperature loss increase. The relation between fluidity and temperature loss of each alloy can be expressed by the following equation within the coating thickness limit of 0.5-1.5㎜. F^*={\frac{a}{T^*-b}}-c$ where, $F^*$ : fluidity in the Full mould, $T^*$ : temperature loss in the mould. a : parameter for full mould. b, c : constants.

• Steel and Composite Structures
• /
• 제21권2호
• /
• pp.289-302
• /
• 2016

A new kind of partially precast or prefabricated castellated steel reinforced concrete beam, which is abbreviated here as CPSRC beam, was presented and introduced in this paper. This kind of CPSRC beam is composed of a precast outer-part and a cast-in-place inner-part. The precast outer-part is composed of an encased castellated steel shape, reinforcement bars and high performance concrete. The cast-in-place inner-part is made of common strength concrete, and is casted with the floor slabs simultaneously. In order to investigate the shear performance of the CPSRC beam, experiments of six CPSRC T-beam specimens, together with experiments of one cast-in-place SRC control T-beam specimen were conducted. All the specimens were subjected to sagging bending moment (or positive moment). In the tests, the influence of casting different strength of concrete in the cross section on the shear performance of the PPSRC beam was firstly emphasized, and the effect of the shear span-to-depth ratio on that were also especially taken into account too. During the tests, the shear force-deflection curves were recorded, while the strains of concrete, the steel shapes as well as the reinforcement stirrups at the shear zone of the specimens were also measured, and the crack propagation pattern together with the failure pattern was as well observed in detail. Based on the test results, the shear failure mechanism was clearly revealed, and the effect of the concrete strength and shear span-to-depth ratios were investigated. The shear capacity of such kind of CPSRC was furthermore discussed, and the influences of the holes on the steel shape on the shear performance were particularly analyzed.