• 대한치과기공학회지
• /
• 제30권2호
• /
• pp.79-86
• /
• 2008

The purpose of this study was to investigate the effect retention element formed by metal surface treatment method on the bond strength of indirect composite resin and metal. The metal specimens were cast from Ni-Cr alloy($Rexillium^{(R)}$ III). They were divided into 5 groups by applied retention element: $50{\mu}m$ aluminium oxide sandblasting group, $250{\mu}m$ aluminium oxide sandblasting group, 0.2mm retention crystal group, 10% $H_{2}SO_{4}$ solution etching group, $110{\mu}m$ $Rocatec^{TM}$ Plus system group. Total 50 metal specimens were veneered with Sinfony indirect composite resin system. Specimens were tested for shear bond strength on an Instron universal testing machine and fracture mode of fractured specimens were analyzed by SEM and EDS. 1. 0.2 mm retention crystals were most effective in improving the resin-metal shear bond strength (p<0.05). 2. Sandblasting by $250{\mu}m$ aluminium oxide were more effective than sandblasting by $50{\mu}m$ aluminium oxide in improving the resin-metal shear bond strength(p<0.05). 3. Fracture mode of resin-metal fractured surface were cohesive failure mode in 0.2mm retention crystal, mixed failure mode in sandblasted specimens, etched specimens and the specimens sandblasted with $110{\mu}m$ $Rocatec^{TM}$ Plus system.

• Steel and Composite Structures
• /
• 제26권3호
• /
• pp.375-386
• /
• 2018

Existing design codes for steel-concrete composite structures give only general information about the shear connection provided by headed studs in group arrangement. Grouting of the openings in prefabricated concrete slabs, where the grouped headed studs are placed in the deck pockets is alternative to cast-in-place decks to accomplish fast execution of composite structures. This paper considers the possibility to reduce the distance between the studs within the group, bellow the Eurocode limitations. This may lead to increased competitiveness of the prefabricated construction because more studs are placed in the group if negative effectives of smaller distances between studs are limited. The main purpose of this work is to investigate these limits and propose an analytical calculation model for prediction of the shear resistance of grouped stud arrangements in the deck pockets. An advanced FEA model, validated by results of push-out experiments, is used to analyze the shear behavior of the grouped stud with smaller distance between them than recommended by EN 1994-1. Calculation model for shear resistance, which is consistent with the existing Eurocode rules, is proposed based on a newly introduced equivalent diameter of the stud group, $d_G$. The new calculation model is validated by comparison to the results of FE parametric study. The distance between the studs in the longitudinal direction and the number of stud rows and columns in the group are considered as the main variables.

• Composites Research
• /
• 제28권5호
• /
• pp.270-276
• /
• 2015

Polyvinylidene fluoride (PVDF)-based nanocomposites are fabricated by incorporation of boron nitride (BN) nanosheets with anisotropic orientation for a potential high thermal conducting ferroelectric materials. The PVDF is dissolved in dimethylformamide (DMF) and homogeneously mixed with exfoliated BN nanosheets, which is then cast into a polyimide film under application of high magnetic fields (0.45~10 T), where the direction of the filler alignment was controlled. The BN nanosheets are exfoliated by a mixed way of solvothermal method and ultrasonication prior to incorporation into the PVDF-based polymer suspension. X-ray diffraction, scanning electron microscope and thermal diffusivity are measured for the characterization of the polymer nanocomposites. Analysis shows that BN nanosheets are exfoliated into the fewer layers, whose basal planes are oriented either perpendicular or parallel to the composite surfaces without necessitating the surface modification induced by high magnetic fields. Moreover, the nanocomposites show a dramatic thermal diffusivity enhancement of 1056% by BN nanosheets with perpendicular orientation in comparison with the pristine PVDF at 10 vol % of BN, which relies on the degree of filler orientation. The mechanism for the magnetic field-induced orientation of BN and enhancement of thermal property of PVDF-based composites by the BN assembly are elucidated.

• 대한치과보철학회지
• /
• 제43권4호
• /
• pp.478-486
• /
• 2005

Statement of problem : Fracture and dimensional change of an acrylic resin denture are a rather common occurrence. Purpose : The purpose of this study was to compare differences in dimensional changes and flexural strength of separate maxillary complete dentures after immediate deflasking by injection molding and conventional compression processing. Material and method: To evaluate dimensional stability, the maxillary dentures were fabricated by using different materials and methods. Lucitone 199(Dentsply Trubyte. york, pennsylvania, USA) and Vertex(Dentimex, zeist, Netherlands) were used as materials. Compression and injection packing methods were used as processing methods. The impression surface of the dentures was measured by 3D Scann-ing System(PERCEPTRON USA) and overlapped original impression surface of the master cast. To evaluate flexural strength, resin specimens were made according to the different materials, powder/liquid ratio and processing methods. Flexural strength of the complete resin specimens (64mm$\times$10mm$\times$3.3mm) were measured by INSTRON 4467. (INSTRON, England) The data was analyzed by ANOVA, t-test and Tukey test. (p<.05 level of significance) Result: The results were as follows 1. There was no significant differences between master model and denture base for each group in overall dimensional changes. 2. Palatal area was more stable than flange or alveolar area in dimensional stability. but. there was no significant differences among each area. 3. Materials and power/liquid ratio had an effect on flexural strength. (P<.05) Especially materials was most effective. (P<.05) 4. Lucitone 199(powder/liquid ratio followed by manufacturer's direction) showed higher flexural strength than Vertex. Conclusion : Dimensional stability or flexural strength are affected by materials rather than packing techniques.

• 복식
• /
• 제33권
• /
• pp.5-25
• /
• 1997

The purpose of this study was to analyze the characteristics of the Junk Art represented in the second half 20the century fashion. The highly developed material civilization resulted in human alienations environmental distruption. By this fact human being of the 20the century was to overcome social com-plexity. In this respect this research was focused that how the characteristics of the junk Art was expressed in the second half 20th century fashion. The concepts of the Junk Art lied in the creation of art work in the 2-dimentional plane of 3-dimentional space through the application of all junks (wood pieces industrial debris trash ready-made goods etc) cast by the mod-ern industrial society and the mass production system. Juck Art had been further envigorated in the footstep of the development of the collage method based on the creation of object aes-thetics. And junk artists have untitled social environments with art by assembling junks as a way of exploring the material world of cur-rent society and provided infinite possibilities of expressional medium and technique. Above all junk Art has been reflected in the fashion as well as other art. Especially a lot of the fashion design by the use of junks and the expressive image of junks is produced in the 20th century. That is many of fashion designers have always been aware of what is happening in the arts and have always been able to use the dis-coveries and ideas of the artist to help them solve design problems and creat fashion which are new inventive and reflective of their time. The fashion designers of the junk fashion design could be said to have presented much more possibilities and new development for-mulas to modern fashion design and provided a new order of other formative arts. Unlike the negative and destructive punk cyberpunk fashion junk fashion was a positive and optimistic aesthetics. junk fashion that keeps pace with science and the development of technology is devoted to trying to grasp the real form of ultimate re-ality.

• 박물관보존과학
• /
• 제16권
• /
• pp.32-45
• /
• 2015

청동현향로(靑銅懸香爐)는 1971년 경기도 하남시 춘궁동에서 발견된 고려시대의 향로이다. 유물의 표면에는 점토가 두껍게 고착되어 있으며, 부식으로 인해 청동병과 다수의 균열이 존재하고 일부분이 결손되어 취약한 상태였다. 청동현향로의 안정한 보존과 전시를 위해 표면에 고착된 이물질을 제거하고 취약한 재질을 강화하였고, 균열부위와 결손부위는 직조유리섬유로 보강하고 에폭시 수지로 복원하였다. 제작기술을 규명하기 위해 성분 분석과 미세조직을 관찰하였다. 성분분석 결과, 몸체, 귀, 고리, 뚜껑, 꼭지부위는 주성분이 Cu-Sn-Pb인 3원계 청동합금으로 주조하였고, 몸체와 귀는 구리의 함량이 높은 구리못으로 고정하였음을 확인하였다. 미세조직은 α상이 대부분이며 Cu와 S이 주성분인 비금속개재물이 존재한다.

• 한국통신학회논문지
• /
• 제27권1C호
• /
• pp.69-77
• /
• 2002

오늘날 통신 기술이 나날이 발전하고 있지만 디지털 영상신호가 방대한 데이터를 가지고 있기 때문에 데이터의 저장, 처리 및 전송을 위해서는 보다 많은 데이터 압축이 필요하게 되었다. 이에 따라 ITU-T에서는 디지털 영상신호의 압축 표준을 위해서 H.26x 등을 제정하였다. 일반적으로 영상처리에서는 픽쳐간 상관 관계를 이용하여, 픽쳐간의 움직임 예측을 통한 시간적 중복성을 제거하여 데이터를 크게 압축하는 것이 많이 사용되고 있다. 대부분의 비디오 코팅 시스템에서 움직임 예측/보상(Motion Estimation/Compensation)방법으로 블록 정합 알고리즘을 사용하는데 이는 특정한 비용 함수의 최소 값을 기반으로 사용되고 있다. 그러나 이 방법은 많은 수의 계산을 필요로 하여 탐색 시간이 오래 걸리는 단점이 있다. 따라서 H.26x에서와 같은 실시간 저비트율 부호화를 위해서는 전역 탐색법 보다는 효율적인 고속 탐색 알고리즘이 효과적이다. 본 논문에서는 움직임 예측에 소요되는 탐색 시간을 줄이기 위해서 고속 탐색 알고리즘 중에서 Nearest-Neighbors 탐색 알고리즘을 이용하여 움직임 예측기를 FPGA로 설계하였으며, VHDL로 코딩(Coding)하고, Xilinx Foundation을 이용하여 설계 및 검증하였다.

• 한국해양환경ㆍ에너지학회지
• /
• 제4권3호
• /
• pp.74-80
• /
• 2001

최근 연안 해역에서의 대규모 어업 활동과 경제개발로 인한 전반적인 산업화 현장의 확대, 그리고 생활 수준의 향상에 따른 여가 활동의 증가 등 다양한 요인에 의해 해저면의 침적폐기물, 폐각류, 오염 퇴적물 등 각종 오염 물질의 배출이 해양 자체의 정화 능력을 넘어서는 심각한 상태에 처해 있는 실정이다 이러한 해저면 폐기물을 그대로 방치해 두게 되면 시간이 경과함에 따라 저서 생태계의 교란을 초래하게 된다. 따라서, 해저면 폐기물에 의한 해양 생태계의 교란을 예방하고, 오염된 해양 환경을 복원하기 위해서는 해저면에 대한 수중침적 폐기물 실태조사를 실시하여 오염실태를 파악하고, 이들 관련자료를 체계적으로 관리 운영함으로서 효율적인 폐기물 수거 방안의 수립을 지원할 수 있는 체계를 갖추어야 한다. 이의 일환으로 본 연구에서는 항 내 수중침적 폐기물의 실태를 파악하기 위한 조사 방법을 확립하고, 이를 토대로 국내 연안의 주요 항만 및 어항에 대한 항 내 수중침적 폐기물 분포 현황을 조사하였다.

• 대한족부족관절학회지
• /
• 제7권1호
• /
• pp.119-125
• /
• 2003

Purpose: The purpose of this study fracture. Materials and Methods: The clinical and radiological analysis were performed on 19 cases of the talus neck fractures who had been treated with conservative treatment or variable methods of operative treatment. Each cases followed up more than 1 year and 6 months from May 1989 to June 2001. The clinical results were analyzed according to the age, cause of injury, fracture type of Hawkins classification, associated soft tissue injury, method of treatments, complications, and Hawkins scoring system. Results: According to Hawkins classification, type I was 6 cases(32%), type II was 5 cases(26%), typeIII was 7 cases(37%), and typeIV was 1 case(5%). In all cases, complete bony union was obtained. According to the Hawkins scoring system, 8 cases(42%) were excellent and good. Avascular necrosis was 4 cases(25%). Traumatic arthritis was 10 cases which were occurred in type II, III and IV. An ankle fusion was 1 case. Conclusion: In talar neck fractures, non-displaced fracture treated by the cast immobilization and displaced fracture treated by early open reduction and internal fixation were expected good results. The complications were 77% of traumatic arthritis and 31% of avascular necrosis in type II, III and IV. We should preoperatively explain to the patient for high complication rates of traumatic osteoarthritis and avascular necrosis in the talus neck fractures.

• 열처리공학회지
• /
• 제7권1호
• /
• pp.61-71
• /
• 1994

This study is to investigate the stress distributions, crystal orientations and magnetic properties during die-upsetting according to working temperature of Nd-Fe-B-Cu alloys. The stress distributions in the specimens during compressing process were calculated by a finite element method program(SPID). The calculated stresses were effective stress (${\sigma}_{eff}$), compression stress(${\sigma}_z$), radial direction stress(${\sigma}_r$) rotational direction stress(${\sigma}_e$) and shear stress(${\tau}_{rz}$). The stress distributions of ${\sigma}_z$, obtained by a computer simulation showed that the stress components causing the magnetic alignment during die-upsetting of the cast magnets were very high at the center-part of a specimen, and decreased toward the periphery-part of a specimen. In view of the above results the magnetic properties should be better at the center-part of a specimen than any other parts. But the measured magnetic properties were better at the mid-part. These results should be due to the fact that the specimens were casted. Normally the magnetic properties are affected by the casting process as well as by the stress levels. ${\sigma}_r$, ${\sigma}_e$ are thought to affect the liquid phase flowing and domain patterns, respectively. The influence of ${\tau}_{rz}$ was trivial, ${\sigma}_{eff}$ distributed similar throughout the specimen. The Nd-rich phase appeared at the peripheral of the specimen where the stress level of ${\sigma}_r$, ${\sigma}_z$, was low or the stress level of ${\sigma}_e$ was high. The Nd-rich phase was squeezed out during die-upsetting. This phase had an effect on the crystal orientation and grain growth. The stress distributions of alloy were irregular at the parts of the specimen where the die contacted with specimen.