• Smart Structures and Systems
• /
• v.2 no.4
• /
• pp.305-312
• /
• 2006

In the case of hospital buildings, where seismic design requirements are very high, existing structuresand especially those attacked by past earthquakes, appear, often, unable to fulfil the necessary safety prerequisites. In this paper, the retrofitting of hospital buildings is investigated, using alternative methods of repair and strengthening. Analysis of an existing hospital building in Patras, Greece, is performed. The load-bearing system is a reinforced concrete system. Two solutions are proposed: strengthening using concrete jackets around column and beam elements and application of viscoelastic dampers for the increase of the stability of the structure. Adequate finite element models are constructed for each case and conclusions are drawn on the efficiency of each rehabilitation method.

• Journal of Drive and Control
• /
• v.16 no.2
• /
• pp.43-50
• /
• 2019

The objective of this study was to reverse engineer a swash plate type piston pump mounted on a wheeled armored vehicle and to analyze the structure of the pump case. From the analysis, the weak parts were identified and corrected in the final design. Each element corresponding to the piston pump case was analyzed. The analytical method was given static boundary conditions, load conditions and confirmed displacement, strain, stress, and safety factor. Plastic deformation and damage were also confirmed and the component elements redesigned through structural analysis Structural analysis and vibration analysis were carried out for the components of the piston pump case. The piston pump model was finally modified by structural analysis and vibration analysis results for each component assembly, and a prototype was designed. Durability test and environmental test were carried out and the test results satisfied all of the requirements. Therefore, the analytical method presented in this study can be utilized as a methodology for element component design in the development of various piston pumps.

• Korean Journal of Health Education and Promotion
• /
• v.16 no.1
• /
• pp.31-43
• /
• 1999

Increase of automobiles become today's environmental problem decreasing space for our children's playground. The traffic situation around us shows automobiles over filled the public roads and started to intrude even on the side walks. Children's traffic safety education for the awareness of the danger from traffic mishaps, and for the behavior to cope with preventives measure by continual learning programs in systematized method is very important need in current health education. For this research, the subject was represented by 243 students from 4th grade in D Elementary School located at Daechi-dong, Seoul. During total of 5 weeks (September 4, 1997 to September 30, 1997), lessons were taught to the subject. Lessons consist of traffic safety education and customized education program that were designed and developed specificially for the subject level. In this research, Case group of 3 classes and control group of 3classes were predetermined before subject's degree of knowledge, attitude, and practice was analized. The difference before and after the training of this education was observed to verify the effectively and to find the influential factors of this education program. On September 2-3, survey study was performed after the training. the results of this study were as follows: 1. The knowledge analysis from the comparison between before and after of the training shows case group and control group scored(8.36, 8.86) before the traning, but scored(10.36, 8.52) after the traning. the difference from the result of the case group is statistically significant(p〈0.001). 2. The attitude analysis from the comparison between before and after of the training shows case group and control group scored(48.23, 49.87) before the training, but scored (51.05, 48.45) after the traning. the difference from the result of the case group is statistically significant(p〈0.001) 3. The practice analysis from the comparison between before and after of the training shows case group and control group scored (27.42, 28.08) before the training, but scored(30.49, 28.25) after the training. The differece from the result of the case group is statistically significant (p〈0.001). 4. The correlation analysis of traffic safety education's influence on traffic safety knowledge, attitude, and practice before training shows the relationship between attitude and practice was satistically significant(p〈0.05). The result after the training shows the relationship between knowledge and attitude, attitude and practice, and knowledge and practice was all statistically significant(p〈0.001).

• Parasites, Hosts and Diseases
• /
• v.51 no.5
• /
• pp.557-562
• /
• 2013

In contrast to the gradual reduction in the number of locally transmitted malaria cases in China, the number of imported malaria cases has been increasing since 2008. Here, we report a case of a 39-year-old Chinese man who acquired Plasmodium ovale wallikeri infection while staying in Ghana, West Africa for 6 months in 2012. Microscopic examinations of Giemsa-stained thin and thick blood smears indicated Plasmodium vivax infection. However, the results of rapid diagnostic tests, which were conducted 3 times, were not in agreement with P. vivax. To further check the diagnosis, standard PCR analysis of the small-subunit rRNA gene was conducted, based on which a phylogeny tree was constructed. The results of gene sequencing indicated that this malaria is a variant of P. ovale (P. ovale wallikeri). The infection in this patient was not a new infection, but a relapse of the infection from the one that he had contracted in West Africa.

• Journal of the Korean Society of Food Culture
• /
• v.11 no.4
• /
• pp.465-473
• /
• 1996

The purpose of this study was to evaluate microbiological hazards in the steps of production, transportation and selling of hamburger and sandwich that were marketed in CVS, then to identify methods of control. The reasults are as follows: As the reasult of operation surroundings of manufacturerand reserch of circulation, $4{\sim}6$ hours are needed from manufacturer to CVS. Also transportation car mean temperature was $10^{\circ}C$ which exceeds the standard of $7^{\circ}C$ or below. Hamburger: Critical control points identified were purchasing, cooking, post-preparation, transportation and holding at CVS. As the reasult of microbial analysis following the case of holding methods and reheating at CVS, microbes of cold holding and reheat after cold holding was within standard value. But in the case of room temperature microbes exceeded standard value. Sandwich: Critical control points identified were purchasing, cooking, post-preparation, transportation and holding at CVS. As the reasult of microbial analysis following the case of holding methods and reheating at CVS, total plate counts of cold holding and reheat after cold holding was within standard value. But in the case of room temperature holding after 24 hours total plate counts exceeded standard value. In the case of room temperature holding the number of microbes increased according to the passage of time. As a reasult of food poisoning bacteria, it was negative in every test in sample against V. parahaemolyticus, Salmonella, S. aureus.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.23
• /
• pp.10175-10179
• /
• 2015

Background: The association between the RTEL1 rs6010620 single nucleotide polymorphism (SNP) and glioma risk has been extensively studied. However, the results remain inconclusive. To further examine this association, we performed a meta-analysis. Materials and Methods: A computerized search of the PubMed and Embase databases for publications regarding the RTEL1 rs6010620 polymorphism and glioma cancer risk was performed. Genotype data were analyzed in a meta-analysis. Odds ratios (ORs) with 95% confidence intervals (CIs) were estimated to assess the association. Sensitivity analyses, tests of heterogeneity, cumulative meta-analyses, and assessments of bias were performed in our meta-analysis. Results: Our meta-analysis confirmed that risk with allele A is lower than with allele G for glioma. The A allele of rs6010620 in RTEL1 decreased the risk of developing glioma in the 12 case-control studies for all genetic models: the allele model (OR=0.752, 95%CI: 0.715-0.792), the dominant model (OR=0.729, 95%CI: 0.685-0.776), the recessive model (OR=0.647, 95%CI: 0.569-0.734), the homozygote comparison (OR=0.528, 95%CI: 0.456-0.612), and the heterozygote comparison (OR=0.761, 95%CI: 0.713-0.812). Conclusions: In all genetic models, the association between the RTEL1 rs6010620 polymorphism and glioma risk was significant. This meta-analysis suggests that the RTEL1 rs6010620 polymorphism may be a risk factor for glioma. Further functional studies evaluating this polymorphism and glioma risk are warranted.

• Journal of Korean Academy of Nursing
• /
• v.24 no.4
• /
• pp.616-622
• /
• 1994

Precise concept analysis has been neglected be-cause of a lack of understanding of its necessity and a lack of conceptual analytic knowledge. Concept analysis is the mental work of examining parts, phenomenon and the interrelated whole of a thing. Focus in this article is to extract the critical attributes of hardiness and make an operational delinition. The process of concept analysis is illustrated and documented using the analytic approach described by Walker and Avant (1983). To explore the explicit or implicit meanings of hardiness, existing literature was reviewed. The evolution of hardiness and the dictionary definitions were also added. Hardiness can be defined as follows : A condition of being inured to fatigue or hardship which has three subcomponents-challenge, control and commitment. Critical attributes of hardiness were extracted that may be used in naming the occurrence of the phenomenon. Model case, contrary case, borderline case and related case were described. Antecedents and consequences were explored. The defining critical attributes of hardiness are : 1. Resistance-hardiness involves resistance of stress or hardship. 2. Hardiness involves appraisal of change as a chance. 3. Hardiness implies interpretation of events and self as influential,. 4. Hardiness requires active involving reaction Implications for nursing and for further study are added.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.272-278
• /
• 2002

At present most mechanical design engineers use the techniques that perform shape modeling, force analysis and DMU(Digital Mok-Up). This kind of design methods shorten the time of manufacturing prototypes and have a merit that decreases development cost. But a hydrauric system has inconvenience that engineers have to modify, and complement whenever needed, because simulation-based approaches are not ubiquitous compared to the case of general mechanical parts. This paper presents a case study of efficient application to hydrauric system for designing VRCS(Valve Remote Control System) using a Hycdraulic system design and analysis software.

• Journal of Welding and Joining
• /
• v.20 no.4
• /
• pp.544-550
• /
• 2002

Arc-spot welding is generally used in joining of precise parts such as case and core in electronic compressor. It is important to control joining deformation in electronic compressor because clearance control in micrometer order is needed for excellent airtightness and anti-nose. The countermeasures far this deformation in field have mainly been dependent on the rule of try and error by operator's experience because of productivities. For control this deformation problem without influence on productivities, development of exact simulation model should be needed. In this study, to solve this deformation problem in arc-spot welded structure with case and core, we intend to make a simulation model that is able to predict deformation in precise order by tuning and feedback between sensing data and simulation results. This paper include development of heat input model for arc-spot welding, temperature monitoring and make a heat transfer model using sensing data in product.

• Journal of Nutrition and Health
• /
• v.27 no.1
• /
• pp.71-78
• /
• 1994

Recently the incidence of hemorrhoids has been increased. There were various factors related to hemorrhoids, the amount of fiber intake was known as one of them. And so we performed this case-control study to investigate the association of hemorrhoids and fiber intake. The data was obtained by the combination of self-administered questionnaire and personal interview. The study population was consisted of matched 156 pairs, the cases were selected from S-hospital in Seoul, the age and sex matched control from the general population. The statistical analysis was performed by matched-analysis. The results summarized as follow : 1) As socio-economic status were low, the odds ratio of hemorrhoids were high. 2) There was significant association between hemorrhoids and regularity of eating time rather than regularity of defecation. 3) The odds ratio of hemorrhoids was 3 times higher in the presence of constipation. 4) The incidence of hemorrhoids was influenced by psychological characteristics such as somatization, obsessive-compulsive, depression, and anxiety. 5) Fiber intake was significantly lower in the cases compared to the controls. When the constipation was controlled, the fiber intake was still lower in the cases. These data provide additional evidence that the fiber intake was related to hemorrhoids.