• 한국지열·수열에너지학회논문집
• /
• 제17권2호
• /
• pp.11-19
• /
• 2021

In this study, combined heat source heat pump system was implemented with 4 single heat source heat pumps each applied with a geothermal source and a water source. Five cases (Case1~Case5) were configured to conduct a performance comparison and analysis of the combined heat source heat pump system. First of all, as a result of analyzing the heat source, the case when 4 ground heat sources were applied (Case1) showed a uniform EST(Entering Source Temperature) distribution throughout the year since it is less affected by outside air compared to the case when 4 water heat sources were applied (Case5). In both winter and summer, the ground heat source maintained higher EST than the water heat source. Therefore, the system with high ratio of geothermal sources is advantageous for heating, and with high ratio of water heat sources is advantageous for cooling.

• 열처리공학회지
• /
• 제34권1호
• /
• pp.25-30
• /
• 2021

The differential gear system is a device designed to distribute the driving force of both vehicle wheels and control the rotational speed when the vehicle turns on a curve. The differential device consists of a differential gear case, a ring gear, and a pressure ring. A differential pinion gear and side gear are mounted on the differential pinion shaft inside the differential gear case. In this study, a pin press-fitting device that mounts the pinier gear and side gear to the differential pinion shaft in the differential gear case was designed, and a jig device for pin press-fitting using servo press was developed. In addition, by precisely measuring the pin press-in load and press-in distance according to the pin hole diameter of the differential gear shaft, the optimization of the pin pressin process was established.

• 한국지열·수열에너지학회논문집
• /
• 제17권4호
• /
• pp.59-67
• /
• 2021

In this study, the performance of the single heat source system and the hybrid system was comparatively analyzed. Case 1 is a ground heat source system, and Case 2 is a water heat source system. Case 3, a hybrid system, reduced the capacity of the ground heat source and applied a water heat source as an auxiliary heat source, and Case 4 was composed of a system that applied a water heat source as an auxiliary heat source to the ground heat source system. As a result of the simulation, in case 3, energy consumption was reduced by up to 2.67% compared to ground sources for cooling. In Case 4, COP was improved by up to 10.02% compared to ground sources during cooling, and EST was calculated to be 2.42℃ lower. During heating, 0.83% was improved compared to the water heat source. At this time, the EST was calculated to be 2.25℃ higher than the water heat source.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.38.1-38.7
• /
• 2020

Background: Lipomas are benign soft tissue neoplasms of mature adipose tissue commonly occurring in the trunk or extremities. But, intraoral lipomas are rare entities which may be only noticed during routine dental examinations. Especially intramuscular lipomas on the tongue have been reported very rarely. In this study, we report a case of intramuscular lipoma on tongue, with a review of the literature from 1978 to 2019, providing data on age, gender, location, presenting symptoms, size, surgical methods, and recurrence. Case presentation: A case of intramuscular lipoma occurring in tongue region in a 65-year-old male is reported. Surgical excision is the mainstay of treatment for the lesion. In order to decrease the deformity and discomfort after the excision, we tried to modify surgical technique using enveloped mucosal flap. This technique provided more comfortable healing procedure on the operative site without recurrence. Conclusion: This is a rare case of large intramuscular lipoma on tongue. Surgical excision with enveloped mucosal flap design was performed to diminish postoperative raw surface and discomfort and a 24-month follow-up showed excellent healing without any recurrence. A case of intramuscular lipoma on tongue and relevant literature reviews are presented in this study.

• 한국환경과학회지
• /
• 제30권7호
• /
• pp.519-527
• /
• 2021

Moving average precipitation provides periodic precipitation patterns by solving precipitation irregularities. However, due to uncertain moving average periods, excessive data smoothing occurs, which limit the possibility to analyze groundwater levels in the short term. Nonetheless, groundwater level fluctuation can compensate these limitations as it can calculate appropriately for unit time and verify the effect of precipitation penetrated into groundwater in a short time period. In this study, the characteristics of groundwater level were evaluated using groundwater level fluctuation to compensate for limitations of groundwater level analysis using moving average precipitation. In addition, the groundwater quality was investigated using the electrical conductivity fluctuation. The study site was Hyogyo-ri, Yesan-si, Chungcheongnam-do. Four observation wells and an automated weather system were used. The correlation between groundwater level fluctuation and precipitation (Case 1) and the correlation between groundwater level and moving average precipitation (Case 3) were compared. In the analysis for 1 hour data, the correlation coefficient of Case 1 was higher than that of Case 3, and in the analysis for 1 day data, the correlation coefficient of Case 3 was higher than that of Case 1.

• 대한본초학회지
• /
• 제37권6호
• /
• pp.53-59
• /
• 2022

Objectives : Cleanser is the most basic tools used in daily skin care. I made a cold process soap using Castanea crenata inner shell (CCIS). I'd like to study the effect of face wash using CCIS cold process (CP) soap on the skin. Methods : The same water and towel were used at the same place in order to examine the skin change state immediately before and after washing face. The skin test was performed before and after 10 minutes washing the face in order to remove these external environmental factors, such as lifestyle, alcohol, tobacco, and stress etc. As a control group, the cases of washing with water and foam cleanser (F/C), which is a popular commercial product, were set. Three cases were compared and analyzed. Results : In the case of water washing, there was a significant decrease in oil (U-zone) but that was not good effect. In the case of F/C and CCIS washing, there were significant decrease in oil (T-zone), pores and pigmentation, but the significance was bigger in CCIS washing. In the case of pores, there was a significant decrease in all three cases. Conclusion : In the case of F/C and CCIS washing, it showed the effect of reducing T-zone oil, pores and pigmentation. But the significance was greater in CCIS case than in F/C case. CCIS cp soap is considered as a form of face wash that is suitable for skin care.

• 한국수소및신에너지학회논문집
• /
• 제35권1호
• /
• pp.105-113
• /
• 2024

The natural gas dehydration process plays a central role in liquefying LNG. This study proposes two natural gas dehydration process systems applicable to liquefied natural gas (LNG) liquefaction plants, and compares and analyzes energy optimization measures through simulation. The fuel gas from feed stream (FFF) case, which requires additional equipment for gas circulation, disadvantages are design capacity and increased energy. On the other hand, the end flash gas (EFG) case has advantages such as low initial investment costs and no need for compressors, but has downsides such as increased power energy and the use of gas with different components. According to the process simulation results, the required energy is 33.22 MW for the FFF case and 32.86 MW for the EFG case, confirming 1.1% energy savings per unit time in the EFG case. Therefore, in terms of design pressure, capacity, device configuration, and required energy, the EFG case is relatively advantageous. However, further research is needed on the impact of changes in the composition of regenerated gas on the liquefaction process and the fuel gas system.

• 대한영양사협회학술지
• /
• 제4권1호
• /
• pp.53-64
• /
• 1998

This study was performed to investigate the cost of nutrition counseling service at present and to suggest the guideline for the payment. Data were collected using questionnaires and the cost of counseling was expected by analyzing the time consumed and needed for nutrition counseling. The results were as follows; In the case of diabetes, mean time of nutrition counseling was 69.7$\pm$35.3min/case, but the dietitian asked 82.7$\pm$44.6min/case for counseling and in the cases of renal diseases, mean time of counseling was 64.3$\pm$24.1min/case and the time asked was 84.8$\pm$34.5min/case (P<001) It was found that time was not enough to educate or counsel the clients. The cost of counseling was not counted in 20.3% of the respondants and the mean nutrition counseling fee was 5,460.6$\pm$3,547.7won/case in in-patient. The group education fee was 6,168$\pm$2,813won/case. The estimations of the cost for nutrition counseling services using labor cost were 18,463.5won in case of diabetes and 18,463.5won/case for patients of renal disease and in group education 8,111.5won and 7,404.3won respectively.

• 한국안전학회지
• /
• 제32권4호
• /
• pp.129-136
• /
• 2017

This study investigated the probability of possible accident through qualitative and quantitative analysis of the pressure safety valve types installed in facilities using high pressure gas to compare the installation domestic and foreign pressure safety valve standards sought the safety characteristics and safety improvement direction accordingly. The three types are the case where the shut-off valve is not installed at the front of the PSV (Case A), If a shut-off valve is installed at the front of the PSV for inspection (Case B) and If a shut-off valve is installed in front of PSV (C.S.O), PSV is installed in parallel (Case C). Three types of cases were compared with FTA and HAZOP. The results of study of the possible accidents due to over-pressure safety valve installation type, used in a high-pressure gas facilities was shows in the following order Case B > Case A > Case C. The results of analysis through FTA was in order to protect the reservoir for the possible occurring of accident the safety valve installation is depend on its type. In the FTA analysis, defects in the device itself which attached to the storage tank as a substitute for analysis of the probability of operator mistakes was Case B with as high as $2.01{\times}10^{-6}$. Depending on the type of installation analysis of Case B in order to ensure safety is prohibited to install shut-off valve and believes that mandatory regulations are needed. Rationally installing of pressure safety valve in the high pressure using facilities will be expected to improve the industrial safety from severe accidents such as high-pressure gas fire explosion.

• 한국환경과학회지
• /
• 제25권1호
• /
• pp.99-105
• /
• 2016

In this paper, a groundwater hydrological study of the Gyeongju well during the Silla period is conducted to investigate how sufficiently the Gyeongju well supplied water demand at the time. It is assumed that the current geology and soil condition in Gyeongju remain similar to the Silla period. Also, the land use and land coverage during the Silla period is estimated based on the current land condition in Gyeongju. Precipitation during the Silla period is analyzed using precipitation data from 1984 to 2014 provided by Gyeonju weather station. Precipitation analysis is applied based on 3 different scenarios; precipitation intensity during the Silla period was Case (1) the same as, Case (2) 30% more, and Case (3) 30% less than the precipitation intensity of the last decade (2005~2014). Furthermore, to observe the use of the well in Gyeongju during droughts, the following condition(Case (4)) is also considered; ten year drought during the Silla period was the same as the ten year drought from 1984 to 2014. Available amount of groundwater development is analyzed using NRCS-CN method. The results show that the potential amount of groundwater in Gyeongju during Silla era was for Case (1) $62,825,272m^3/year$, Case (2) $93,606,567m^3/year$, Case (3) $32,277,298m^3/year$, and Case (4)$32,870,896m^3/year$. Also, it has been shown that $45,260,000m^3$ of groundwater were required to supply to all households in Gyeongju during Silla era. Therefore, if the precipitation intensity during Silla era was similar with the last decade, the groundwater would provide enough supply to all households in Gyeongju. However, in the case that the precipitation intensity during Silla era was 30% less than the last decade or a ten year drought happened, it is predicted that the water use in Gyeongju would have been limited.