• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.85-94
• /
• 2013

PURPOSES: The performance of tack coat, commonly used for layer interface bonding, is affected by application rate and curing time. In this study, bonding strength tests were performed according to the application rate and curing time of asphalt emulsion. Based on finding from this study, optimum application rates and curing times are proposed. METHODS: In order to investigate bonding characteristic of asphalt emulsion, tests were performed on both asphalt concrete pavement and portland concrete pavement. Also, asphalt emulsions were tested at the application rate of 0, 0.2, 0.4, 0.6, and $0.8{\ell}/m^2$ and at the curing time of 0, 0.5, 1, 2, and 24 hours. Pull-off test and shear bonding strength test, which commonly used for bonding strength measurement of asphalt emulsion, were adopted for this study. To assess field performance under different testing condition, asphalt emulsions were applied to in-service pavement. Throughout coefficient of determination analysis between material index properties from asphalt emulsion and mechanical response from bonding strength tests, performance correlativity was analyzed. RESULTS: Test results show that optimum application rate for asphalt overlay on asphalt concrete pavement (AOA) and asphalt overlay on concrete pavement (AOC) was $0.4{\sim}0.5{\ell}/m^2$ and $0.3{\sim}0.5{\ell}/m^2$, respectively. According to the curing time increment, tensile strength and shear strength of AOC were increased to 22~44% and 20~39%, respectively. AOA case also show strength increment in tensile strength (42%) and shear strength (9%). We tested the applicability of tack coat materials at the field sites, and our findings demonstrated that the bonding (for D and E) and rapid curing (for B, C, and D, E) performances were superior than others. Among material index properties, there was a high correlation between penetration ratio and bonding strength test result. CONCLUSIONS : Result show that interlayer bonding strength was affected by asphalt emulsion type, application rate and curing time. AOC required slightly higher application ($0.1{\ell}/m^2$) than AOA. Both AOA and AOC cases show higher strength at longer curing time. Up to 2hours of curing, rapid strength increments were observed, but strength increment ratio was decreased after 2hours of curing. From the observed correlation between penetration ratio and bonding strength, it is expected that penetration ratio can be used as one of important factors affecting bonding strength analysis.

• Analytical Science and Technology
• /
• v.31 no.1
• /
• pp.47-56
• /
• 2018

Finding the blood left at a crime scene is very important to reconstruct or solve a criminal case. Although numerous reagents have been developed for use at crime scenes, luminol is the most representative. Bluestar Forensic has been used in recent years, but is expensive and cannot be stored after preparation. This study aims to develop a new luminol reagent that can be stored for a long period of time while maintaining the chemiluminescence intensity at the level of Bluestar Forensic. Because luminol dissolves well in aqueous alkaline solutions, the use of sodium hydroxide in the preparation of luminol reagents can promote the decomposition of hydrogen peroxide. Magnesium sulfate, sodium silicate, and potassium triphosphate have been used as hydrogen peroxide stabilizers. The effects of the addition of these substances on the chemiluminescence emission intensity and the storage period of the luminol reagents were confirmed. The addition of a hydrogen peroxide stabilizer was shown to have no significant affect on the chemiluminescence emissions intensity or stabilized pH of the luminol reagent during storage. It also greatly increases the shelf life of the reagents. The use of magnesium sulfate as a hydrogen peroxide stabilizer is the most appropriate. When sodium perborate is used instead of hydrogen peroxide as an oxidizing agent, there is no significant change in the sensitivity and chemiluminescence emissions intensity, but the storage period is shortened. However, after the reaction with blood, the pH of the mixed solution does not increase significantly, and is judged to be more suitable than a reagent made of hydrogen peroxide.

• Journal of Conservation Science
• /
• v.26 no.2
• /
• pp.149-156
• /
• 2010

One of resins, V-Flon is useful as a coating material because YK-D80, which is a solvent for V-Flon, is not highly volatile. However, it can not completely harden and can flow out when metal artifacts are joined and restored in the process of the treatment. Therefore, after the impregnation process in order to accelerate the hardening speed of a coating material, usually a dry oven was adopted. This study focused on finding the problems on the dry oven which is employed to increase the speed and investigating the most effective solvent and its composition by checking any change occurred depending on the concentration of solvents. Six different types of solvents were selected and samples were prepared in a manner that they were impregnated with solvents in three concentrations respectively (10%, 20%, 30%). To determine the condition of the samples, the stability evaluation was performed by measuring the change of color and the gloss, the thickness of coated layers, the corrosion after coating, the water resistance by contact angles. Through the comparative experiments between the natural drying and the artificial drying using a dry oven, it was found that when the dry oven is used, some problems are identified on the point of forming a uniform and stable layer because of the unstable data collected from the forced artificial dry. The experiments performed using 3 different concentration rates (10%, 20%, 30%) presented that in the case of 10% V-Flon in Xylene (using as a solvent), its layer was thin as well as it showed the high water-barrier property, which allows it to form the stably coated layer with the lower gloss and color change.

• Journal of the Korean Society for Library and Information Science
• /
• v.29
• /
• pp.281-304
• /
• 1995

The purpose of this study is to identify the degree to which the card catalog in a university library serves its users and to provide useful information for the design of conversion from card catalog to online catalog. From August 19th to September 16th 1995, 278 users of Duksung Women's University Library were randomley selected and surveyed in terms of card catalog use, success rate of card searching, and catalog use training received. Major findings are as follows: 1. Taking into considerations the fact that Library users tended to use more heavily oriental card catalog$(61.8\%)$ than western card catalog$(8.3\%)$ or classification card catalog$(26.3\%)$, oriental card catalog should be designed to improve its search function of the catalog. 2. It was found that the university library card catalog was not easy to use by $49.3\%$ of the users of Duksung University Library. 3. One of main reasons why the card catalog is hard to use is that there is no subject card to which users can access for subject searching. Besides, users have difficulties in locating appropriate classification numbers for subjects which users are interested in. 4. When success rate is defined as finding appropriate cards in catalog boxes, the success rate was reported to be $87.0\%$. 5. The major access points of known items which library users utilized mostly were author$(18.3\%)$ and title$(74.5\%)$. 6. In case of translated versions of foreign materials, original author name cards instead of pronounced original name card written in Korean were given to them as access points. $79.9\%$ of library users of Duksung Women's University insisted that both original and pronounced author name writ':en in Korean should be given as access points to foreign authors for the sake of user's convenience. 7. Formal training programs for card catalog use were found not to be sufficient. Small group informal training courses should be offered to users who need to get information for catalog use by library staffs. 8. Considering the trend that orders of access points have been changed from title, author and subject in card catalog to title, keyword, and author in online catalog, the existing card catalog of Duksung Women's University is expected not to meet future users' needs for subject searching unless the funcions of subject searching of catalog is improved.

• Health Policy and Management
• /
• v.26 no.4
• /
• pp.359-372
• /
• 2016

Background: The purpose of this study was to develop risk-adjustment models for acute stroke mortality that were based on data from Health Insurance Review and Assessment Service (HIRA) dataset and to evaluate the validity of these models for comparing hospital performance. Methods: We identified prognostic factors of acute stroke mortality through literature review. On the basis of the avaliable data, the following factors was included in risk adjustment models: age, sex, stroke subtype, stroke severity, and comorbid conditions. Survey data in 2014 was used for development and 2012 dataset was analysed for validation. Prediction models of acute stroke mortality by stroke type were developed using logistic regression. Model performance was evaluated using C-statistics, $R^2$ values, and Hosmer-Lemeshow goodness-of-fit statistics. Results: We excluded some of the clinical factors such as mental status, vital sign, and lab finding from risk adjustment model because there is no avaliable data. The ischemic stroke model with age, sex, and stroke severity (categorical) showed good performance (C-statistic=0.881, Hosmer-Lemeshow test p=0.371). The hemorrhagic stroke model with age, sex, stroke subtype, and stroke severity (categorical) also showed good performance (C-statistic=0.867, Hosmer-Lemeshow test p=0.850). Conclusion: Among risk adjustment models we recommend the model including age, sex, stroke severity, and stroke subtype for HIRA assessment. However, this model may be inappropriate for comparing hospital performance due to several methodological weaknesses such as lack of clinical information, variations across hospitals in the coding of comorbidities, inability to discriminate between comorbidity and complication, missing of stroke severity, and small case number of hospitals. Therefore, further studies are needed to enhance the validity of the risk adjustment model of acute stroke mortality.

• Journal of Broadcast Engineering
• /
• v.15 no.4
• /
• pp.474-486
• /
• 2010

In this paper, we propose a new method for detection moving object contour using spatial and temporal edge. In general, contour pixels of the moving object are likely present around pixels with high gradient value along the time axis and the spatial axis. Therefore, we can detect the contour of the moving objects by finding pixels which have high gradient value in the time axis and spatial axis. In this paper, we introduce a new computation method, termed as temporal edge, to compute an gradient value along the time axis for any pixel on an image. The temporal edge can be computed using two input gray images at time t and t-2 using the Sobel operator. Temporal edge is utilized to detect a candidate region of the moving object contour and then the detected candidate region is used to extract spatial edge information. The final contour of the moving object is detected using the combination of these two edge information, which are temporal edge and spatial edge, and then the post processing such as a morphological operation and a background edge removing procedure are applied to remove noise regions. The complexity of the proposed method is very low because it dose not use any background scene and high complex operation, therefore it can be applied to real-time applications. Experimental results show that the proposed method outperforms the conventional contour extraction methods in term of processing effort and a ghost effect which is occurred in the case of entropy method.

• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.89-96
• /
• 2015

Recently, much research has been put into finding the causes and solutions of slagging/fouling problems that occur at the end of the boiler. This slagging/fouling, caused by low-rank coal's ash, disturbs the thermal power and greatly reduces efficiency. In environmental aspects, such as NOx pollution, governments have been implementing restrictions on the quantity of emission gases that can be released into the atmosphere. To solve these problems, research on Ash Free Coal (AFC), which eliminates ash from low-rank coal, is in progress. AFC has advantages over similar high-rank coals because it increases the heating value of the low grade coal, reduces the contaminants that are emitted, and decreases slagging/fouling problems. In this study, using a DTF, the changes of NOx emissions, unburned carbon, and the characteristics of ash deposition were identified. KCH raw coal, AFC extracted from KCH, residue coal, Glencore, and Mixed Coal (Glencore 85wt% and residue coal 15wt%) were studied. Results showed that AFC had a significantly lower emission of NOx compared to that of the raw coal and residue coal. Also, the residue coal showed a higher reactivity compared to raw coal. And finally, In the case of the residue coal and mixed coal, they showed a lower ash deposition than that of low-rank coal.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.4
• /
• pp.176-182
• /
• 2014

This paper introduces the development of global fringe search (GFS) software for preprocessing of Daejeon Correlator. In case of the VLBI observation, a observer conducts the observation for the reference sources with strong and point-like radio stars on schedule in order to confirm the well-observedness of the radio source by the radio telescope. The correlator performs the correlation for the reference sources to detect the fringe completely. We developed the GFS software by calculating the precise delay time between each observatory based on specific observatory. Then, this software calculates the precise delay time by using the delay model (correlator model) of reference source and information of time offset between the Hydrogen Maser frequency standard and GPS (Global Positioning System) clock located in each observatory through the correlation preprocessing. In order to confirm the performance of the developed software, experiments were carried out for the reference sources and target sources observed by the KaVA (KVN and VERA Array). Experimental results show that the GFS software has effectively good performance by finding the precise delay time offset according to the comparison between the compensated delay time offset and one without compensation.

• The Korean Journal of Nuclear Medicine
• /
• v.29 no.3
• /
• pp.307-312
• /
• 1995

The present study has been carried out to assess the diagnostic usefulness of radioaerosol lung scan in complete bronchial obstruction (n=7) and bronchial narrowing (n=1) of varying causes. $^{99m}Tc$-phytate lung scan was performed using the aerosol generated by a BARC nebulizer. Scan alterations were correlated with those of chest radiography, bronchography, lung CT and/or brochoscopy. In every case scan showed characteristic intense deposition of radioaerosol in a short slightly dilated, bronchial segment immediately proximal to obstruction or stenosis. Characteristically it was accompanied by an airspace aerosol deposition defect distally. The finding of a short, clubbed, bronchial radioaerosol deposition with distal airspace defect is a sensitive, specific indicator of bronchial obstruction or stenosis. It was especially useful in the detection of the obstruction of a small bronchus at the lobar and sublobar levels. We propose to name it the prestenotic aerosol deposition sign.

• Korean Journal of Agricultural Science
• /
• v.13 no.2
• /
• pp.311-317
• /
• 1986

On 11-year-old female mixed-breed dog with chief complaints of existence of abdominal enlargement and anorexia was referred to the veterynary teaching hospital of Chungnam National University. The dog was diagnosed into cholangiocarcinoma by the result of the histopathological observation. The results observed are summarized as follows: The clinical signs were abdominal enlargement, anorexia, dyspnea and depression. There were marked increase in serum glutamic pyruvic transaminase(GPT), serum glutamic oxaloacetic transaminase(GOT), lactic dehydrogenase(LDH) and blood urea nitrogen(BUN). Serum total protein and albumin were slightly below normal. In gross finding, the liver was enlarged and friable with numerous white, cauliflower-like nodules over the surface and composed on cysts from 3 to 4 cm in diameter. The cystic lesions contained a yellow gelatinous material. Anatomically, this neoplasm was classified as intrahepatic bile duct carcinoma. Histologically, this neoplasm was combined tubular carcinoma with bile duct cystadenocarcinoma. The former were characterized by tubular structures lined by anaplastic cuboidal or columnar cells with diffuse fibrous stroma, and the latter by multiple cystic structures lined by simple and stratified cuboidal or columnar cells.