• Journal of IKEEE
• /
• v.3 no.2 s.5
• /
• pp.196-203
• /
• 1999

In this paper, the DS(direct sequence)-CDMA and MC(multi-carrier)-CDMA, which are being researched recently as a synchronous IMT-2000 scheme for next-generation mobile multimedia communications, are studied in terms of BER(bit error rate) performance. The BER performance of MC-CDMA with EGB, MRC, and improved MMSEC detection scheme are analyzed and compared to that of conventional DS-CDMA adopting RAKE receiver through the computer simulations under the environments of synchronous IMT-2000 transmission channel. Not only single user case but also multiuser case is considered in the given system. As a result, it is shown that MC-CDMA with MMSEC detection outperforms all other schemes improved the $E_b/N_o$ by about 5 [dB] and 6 [dB] when the BER is $2{\times}10^{-3}$, for the indoor/outdoor fading channel and synchronous IMT-2000 transmission channel, respectively. Also in the multiuser case, MC-CDMA with MMSEC detection scheme exhibits better performance than all the other schemes.

• The Mathematical Education
• /
• v.56 no.1
• /
• pp.63-80
• /
• 2017

By analysing the examination papers from third grade high school students, we classified the errors occurred in the problem solving process of high school 'Geometry and Vectors' into several types. There are five main types - (A)Insufficient Content Knowledge, (B)Wrong Method, (C)Logical Invalidity, (D)Unskilled Expression and (E)Interference.. Type A and B lead to an incorrect answer, and type C and D cannot be distinguished by multiple-choice or closed answer questions. Some of these types are classified into subtypes - (B1)Incompletion, (B2)Omitted Condition, (B3)Incorrect Calculation, (C1)Non-reasoning, (C2)Insufficient Reasoning, (C3)Illogical Process, (D1)Arbitrary Symbol, (D2)Using a Character Without Explanation, (D3) Visual Dependence, (D4)Symbol Incorrectly Used, (D5)Ambiguous Expression. Based on the these types of errors, answers of each problem was analysed in detail, and proper ways to correct or prevent these errors were suggested case by case. When problems that were used in the periodical test were given again in descriptive forms, 67% of the students tried to answer, and 14% described flawlessly, despite that the percentage of correct answers were higher than 40% when given in multiple-choice form. 34% of the students who tried to answer have failed to have logical validity. 37% of the students who tried to answer didn't have enough skill to express. In lessons on curves of secondary degree, teachers should be aware of several issues. Students are easily confused between 'focus' and 'vertex', and between 'components of a vector' and 'coordinates of a point'. Students often use an undefined expression when mentioning a parallel translation. When using a character, students have to make sure to define it precisely, to prevent the students from making errors and to make them express in correct ways.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2339-2344
• /
• 2014

of a microstrip transmission line, this transmission line can operate as the microstrip line or the coplanar line according to open or short connection between the ungrounded copper plane and grounded plane on the base plane. Two different type operation of the transmission line means that one transmission line can have two different characteristic impedances. This paper proposes and fabricates the circuit to be operated 2-ports power transmission line or 2-way power divider with the stable input matching characteristic by using this dual-impedance transmission line. The proposed circuit operates 2-ports power transmission line in case of the coplanar line or 2-way power divider line in case of the microstrip line. The fabricated circuit shows $S_{21}$ > -0.2 dB and $S_{11}$ < -15 dB above 700 MHz when the circuit operates 2-ports power transmission line. And, it is $S_{21}$ > -3.8 dB, $S_{11}$ < -10 dB and $S_{21}/S_{31}$ < ${\pm}0.3dB$ above 700 MHz when the circuit operates 2-way power divider.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12A
• /
• pp.2012-2018
• /
• 2001

This paper proposes the adaptive suboptimal iterative algorithm using threshold to reduce system complexity in the PTS\`s. Performance of the proposed adaptive suboptimal iteration algorithm is represented in terms of iteration number and CDF. In the case of the number of sub-block is 4, the 10-3 PAPR of the proposed method and P S improved this by 0.4dB compared to Cimini\`s. And the complexity of the proposed method was reduced to nearly 22% for the PTS\`s and 44% for the Cimini\`s for 8dB threshold. For the 8 sub-blocks, the 10$\^$-3/ PAPR of the proposed method reduced by 0.7dB compared to PTS\`s, but improved by 0.4dB compared to Cimini\`s. And the complexity of the proposed method was reduced to nearly 2.4% for the PTS\`s and 39% for the Cimini\`s.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.446-452
• /
• 2009

OFDM system has a disadvantage of sensitiveness about the effect of frequency offset caused by the discord of oscillators in the transmitter and receiver. Either, the frequency offsets in mobile radio channels distort the orthogonality between sub-carriers resulting in the inter-carrier interference(ICI). In this paper, we analyze the effect of the ICI and propose a new method using SC technique. To analyze BER(Bit Error Rate) and CIR(Carrier to Interference Ratio) performance of the proposed method. the simulation program MATLAB is used. By the simulation results, SNR performance is improved by this method. In case the frequency offset is 0.3 and 0.5, SNR gains are over 0.5dB and 1dB in the BPSK modulation and 1dB and 2dB in the QPSK modulation at BER of $10^{-3}$ respectively. In addition, CIR performance is improved over 15dB. As a result, the proposed method is more effective to improve the system performance than the conventional method.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.153-162
• /
• 2023

It is important to determine water movement at the growing substrate used in soil-less cultivation for better management of water supply. Numerical simulation is a fast and versatile approach to evaluate highly accurate water distribution. The objective of this study is to simulate the water movement in rockwool as a soil-less medium using HYDRUS-2D. HYDRUS-2D was used to simulate the spatial and temporal water movement in two types of rockwool slabs (Floriculture (FL), high density; Expert (EP), low density). The simulation was performed at two pulse conditions: 10 min ON and 50 min OFF (case A), 20 min ON and 40 min OFF (case B). The total irrigation amounts were the same at both cases. In case A, during the irrigation ON, the water contents at FL increased 1.93-fold faster than the values at EP. Whereas, during the irrigation OFF, the decreasing rate of water contents at FL was almost the same as one at EP. At case B, these values were not changed much from case A. However, the duration of optimum water content (50% - 80%) was 15.0 min and 23.5 min at case A and case B, respectively. Thus, FL and 20 min ON and 40 min OFF (case B) could supply water to rockwool much faster and longer than EP. Once qualitatively validated, this simulation of water movement in rockwool could be used to design an effective optimum irrigation method for vegetables.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.135-140
• /
• 2005

Installation of ceiling type unit is achieved by one of efforts for agreeable classroom environment embodiment along with economic growth. But research about changing the position of ceiling type unit is lacking in present. Therefore, this thesis is to study the thermal environment of 5 different position cases of ceiling type, namely Case A, B, C, D, E. Here, Case C is the case that has the position of ceiling type center of the classroom and the other 4 alternatives are 0.7 m away from the Case C according to x and z axis. In this thesis temperature distributions, air current distribution, heat amenities such as PMV of occupants are analyzed as the environmental factors. Through these factors, Case C and Case D are the better position alternatives than the alternatives of Case A, Case B and Case E because the latter cases the air current reaches directly to indoor occupants so that occupants feel chilly. This thesis has a conclusion under the condition of only one inlet air temperature and seat arrangement. But afterwards more inlet air condition and seat arrangement must be considered.

• Journal of Advanced Navigation Technology
• /
• v.5 no.1
• /
• pp.37-44
• /
• 2001

In this paper, the channel environment for next generation ITS/DSRC which is developed for 10Mbps is modeled with ray tracing technique and, we analyzed BER of OFDM which has an advantage over reducing the effect of ISI with multi-carrier and guard time, occuping bandwidth on 6-ray channel environment. Also, we applied the one-tap equalizer to improve the performance of BER. In case only OFDM is applied with 32 sub-carrier, the result of BER is under $10^{-6}$ from 10 to 100m if $E_b/N_0$ is more than 23dB. But in case OFDM and one-tap equalizer are applied with 32 sub-carrier, $E_b/N_0$ is required of about 17dB to achieve BER under $10^{-6}$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.251-256
• /
• 2001

An error probability analysis is performed far a hybrid DS/SFH spread-spectrum system using minimum shift keying(MSK) modulation. The channel is assumed to be a Rayleigh fading channel with partial-band noise interference. Expressions are derived for the bit error rate(BER) in the context of Rician and Rayleigh fading channels, as a function of the average signal-to-noise ratio(SNR) $E_b/N_0$, the average signal-to- interference ratio(SJR) $E_b/N_J$, and channel parameters. As a result, in the fading channel with large Rician factor, K, which denotes the ratio of power of the direct and the diffused components, the partial-band interference is the worst case. On the other hand, in Rayleigh fading channel(K=0), the full-band interference($\rho$=1) brings the system to the worst case. Performance comparisons among various channels show that the factor K has much large effect on overall performance. For example, in conditions of $\rho$=0.1 and BER=$10^-2$, the system in Rician channel with K=10 requires more 1.9 dB SNR than that in AWGN channel, whereas it is less 5 dB SNR than that in the Rayleigh channel with K=0.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1785-1796
• /
• 2015

In this paper, we investigate achieving the full diversity order and power gains in case of using OSTBCs and quasi-OSBCs in the x channel system with interference alignment with more than 2 antennas at each terminal. A slight degradation is remarked in the case of quasi-OSTBCs. In terms of receiver structure, we show that due to the favorable structure of the channel matrices, the simple zero-forcing receiver achieves the full diversity order, while the interference cancellation receiver leads to degradations in performance. As compared to the conventional scheme, simulation results demonstrate that our proposed schemes achieve 14dB and 16.5dB of gain at a target bit error rate (BER) of 10^-4 in the case of OSTBCs with 3 and 4 antennas at each terminal, respectively, while achieving the same spectral efficiency. Also, a gain of 10dB is achieved at the same target BER in the case of quasi-OSTBC with 4 antennas at each terminal.