• Journal of Korea Port Economic Association
• /
• v.31 no.3
• /
• pp.167-186
• /
• 2015

The purpose of this case study is to verify the usefulness of three costing models and a minimum profit management model that can support the logistics warehouse companies in the Busan Newport Distri-park. This case study investigated traditional costing, activity-based costing (ABC), and time-driven ABC (TDABC); and suggested that an appropriate minimum profit management model is contribution margin analysis. Accordingly, in order to verify the usefulness of models, this case study surveyed the actual cost management conditions of companies, applied the three costing models to the "K" warehouse company in the Busan Newport Distri-park, and undertook a comparative study of the results. This case study produced two main findings. First, TDABC was verified as the most useful and advanced of the three costing models tested. Second, contribution margin analysis was confirmed to be the most suitable model to manage minimum profits for port warehouse companies in the Busan Newport Distri-park.

• Design & Manufacturing
• /
• v.15 no.1
• /
• pp.21-25
• /
• 2021

When the product is removed from the mold after molding during the sheet metal molding process, elastic recovery causes a springback phenomenon. Much research has been done to minimize this phenomenon. In this study, V-bending experiments were conducted using galvanized steel sheets, stainless steel, and aluminum sheet materials, using a total of nine types of thin sheet materials of 1.0t, 1.5t, and 2.0t, respectively. Molding analysis and experimental data were compared and analyzed. In the case of galvanized steel sheets, it was considered that the springback phenomenon occurs more frequently in molding analysis than in experiments. It was considered that the springback phenomenon occurs greatly in the experiment, not the interpretation of the molding of the stainless steel plate and the aluminum plate. It was considered that the springback occurrence tendency of the molding analysis and the experiment was the same, and the springback occurrence error rate of the molding analysis and the experimental result was about 4.0%.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.149-151
• /
• 2009

This paper gives a comparative analysis on the luminous efficiency of the bulb type LED lamps. we compare and analyze the measurement values bulb type LED lamps using both photogoniometer and integrating sphere. The volt and watt of one 1map are 220 V and 7 W, respectively. The volt and watt of other one are 100 V and 5.3 W, respectively. the values of those were 79.7 1m/W and 76.9 1m/W in the integrating sphere, respectively. Similarly, the values of those were 80.2 1m/W and 79.3 1m/W on the photogoniometer, respectively. As a result, the value of luminous efficiency can be measured using either integrating sphere or absolute goniometer regardless of the difference in case of bulb type LED lamps.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.4
• /
• pp.253-262
• /
• 2020

This study provides a comparative analysis of experiments-based enhancements and sensitivity evaluations for the structural design of an automatic ocean salt collector under various load conditions. The sizing variables of the structural members were considered as design factors. The strength and weight performances were selected as output responses. The design of experiments used in the comparative study consisted of the orthogonal array design, Box-Behnken design, and central composite design. The response surface model, one of the metamodels, was applied to the approximate model generation. The design enhancement performance metrics, including numerical costs and weight minimization, according to the design of experiments, were compared from the best design case results. The central composite design method showed the most enhanced design results for the structural design of the automatic ocean salt collector.

• Earthquakes and Structures
• /
• v.7 no.5
• /
• pp.667-689
• /
• 2014

Structural walls (also known as shear walls) are one of the common lateral load resisting elements in reinforced concrete (RC) buildings in seismic regions. The performance of RC structural walls in recent earthquakes has exposed some problems with the existing design of RC structural walls. The main issues lie around the buckling of bars, out-of plane deformation of the wall (especially the zone deteriorated in compression), reinforcement getting snapped beneath a solitary thin crack etc. This study compares performance of a typical wall designed by different standards. For this purpose, a case study RC shear wall is taken from the Hotel Grand Chancellor in Christchurch which was designed according to the 1982 version of the New Zealand concrete structures standard (NZS3101:1982). The wall is redesigned in this study to comply with the detailing requirements of three standards; ACI-318-11, NZS3101:2006 and Eurocode 8 in such a way that they provide the same flexural and shear capacity. Based on section analysis and pushover analysis, nonlinear responses of the walls are compared in terms of their lateral load capacity and curvature as well as displacement ductilities, and the effect of the code limitations on nonlinear responses of the different walls are evaluated. A parametric study is also carried out to further investigate the effect of confinement length and axial load ratio on the lateral response of shear walls.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.1
• /
• pp.20-28
• /
• 2003

In this paper, we present results of the comparative analysis of the flicker phenomena in the poly-Si TFT-LCD and a-Si:H TFT-LCD arrays for the development and manufacturing of wide-area and high-quality TFT-LCD displays. We used four different types of TFTs; a-Si:H TFT, excimer laser annealed (ELA) poly-Si TFT, silicide mediated crystallization (SMC) poly-Si TFT, and counter-doped lateral body terminal (LBT), poly-Si TFT. We defined the electrical quantity of the flicker so that we could compare the flickers quantitatively for four different 40" UXGA TFT-LCDs. We identify three factors contributing to the flicker, such as charging time, kickback voltage and leakage current, and analyze how much each of three factors give rise to the flincker in the different TFT-LCD arrays. In addition, we suggest and show that, in the case of the poly-Si TFT-LCD arrays, the low-level (minimum) gate voltages should be carefully chosen to minimize the flicker because of their larger leakage currents compared with a-Si TFT-LCD arrays.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.19 no.4
• /
• pp.117-126
• /
• 2023

Traditional markets, formed naturally, often feature aged buildings and facilities that are susceptible to fire. However, the lack of adequate fire detection systems in these markets can easily lead to large-scale fires upon ignition. Therefore, this study was conducted with the aim of detecting fires in traditional markets, utilizing thermal imaging cameras for data collection and the YOLOv8 model for object detection experiments. Data were collected in the night markets within traditional markets of xx city and by simulating fire scenarios. A comparative analysis of the Nano and XL models of YOLOv8 revealed that the XL model is more effective in detecting fires. The XL model not only demonstrated higher accuracy in correctly identifying flames but also tended to miss fewer fires compared to the Nano model. In the case of objects other than flames, the XL model showed superior performance over the Nano model. Taking all these factors into account, it is anticipated that with further data collection and improvement in model performance, a suitable fire detection system for traditional markets can be developed.

• Asia pacific journal of information systems
• /
• v.32 no.2
• /
• pp.249-274
• /
• 2022

This study is to focuses on users' attitudes toward augmented reality games. Based on the Technology Acceptance Model (TAM) and Flow theory, continuous usage intention was set as a dependent variable, and immersion was set as a mediating variable. As independent variables, spatial presence, perceived interactivity, perceived pleasure, and sickness were set. Besides, this study strived to compare and analyze Korean and Chinese Data. The results of this study were as follows. First of all, Korean users significantly affected spatial presence, perceived pleasure, and immersion. Spatial presence and perceived pleasure had also mediated effects on continuous usage intention through immersion. However, perceived interactivity and sickness did not affect immersion and even no mediating effect to continuous usage intention. In the case of Chinese users, spatial presence, perceived interactivity, and perceived pleasure were grouped into one variable. This variable influenced immersion and also had mediated effect on continuous usage intention. However, sickness, like Korean users, did not affect the set path. This study had implications for analyzing user perspective using immersion, a significant variable in previous research. In addition, this study found similarities and characteristics through a comparative analysis between Korean and Chinese users indirectly.

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.1943-1949
• /
• 2024

This study focuses on the comparative analysis of ABS polymer samples produced using two distinct manufacturing techniques: 3D printing and the sol-gel methods. In the first approach, ABS polymer was augmented with rare earth oxides, Er₂O₃ and Gd₂O₃, in nano powder form and fabricated into test specimens using 3D printing technology. In the second approach, identical samples were prepared via the sol-gel technique involving mold-based fabrication. Elemental content analysis revealed no significant differences between the samples produced by the two methods. The study proceeds to evaluate the gamma-ray shielding, neutron shielding, temperature resistance, and SEM/EDS pictures of ABS samples generated through both techniques. 3D printing method exhibited more favorable results in terms of structure morphology and thermal stability while there is no significant difference for radiation shielding. The results provide insights into the performance and suitability of each production method for radiation shielding applications. This research not only contributes to enhancing radiation shielding technology but also informs the selection of the most appropriate fabrication method for specific applications in nuclear technologies and diagnostic energy range in medical purposes.

• Korean Journal of Comparative Education
• /
• v.24 no.3
• /
• pp.227-244
• /
• 2014

This study is to explore and compare the main research area of national and international universities, figure out the differences of the research trends depending on national and international universities, and suggest which area Korea universities could focus on and head to. The study is conducted on the fields of 'Communication and Media' in humanities and 'Electrical Engineering' in engineering for the cases of 10 national and international universities. The data is based on the 3 years journals published between 2009 and 2011 by 10 universities, and analyzed using network analysis. The data is processed with three steps and visualized using Ucinet, Gephi, Netdraw program. These result show, in case of 'Communication and Media', the focus of the universities in Korea mainly on the classical research fields with only a few new research area comparing with international universities. In case of 'Electrical Engineering', national and international universities covers various areas, from classic ones to emerging ones. But the specific research areas are different. These results suggest the research areas which ares the universities in Korea will pursue in near future.