• 지능정보연구
• /
• 제3권2호
• /
• pp.33-55
• /
• 1997

A data model is a diagram that describes the properties of different categories of data and the associations among them within a business or information system. In spite of its importance and usefulness, data modeling activity requires not only a lot of time and effort but also extensive experience and expertise. The data models for similar business areas are analogous to one another. Therefore, it is reasonable to reuse the already-developed data models if the target business area is similar to what we have already analyzed before. In this research, we develop a case-based reasoning system for data model reuse, which we shall call CB-DM Reuser (Case-Based Data Model Reuser). CB-DM Reuse consists of four subsystems : the graphic user interface to interact with end user, the data model management system to build new data model, the case base to store the past data models, and the knowledge base to store data modeling and data model reusing knowledge. We present the functionality of CB-DM Reuser and show how it works on real-life a, pp.ication.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.449-456
• /
• 2000

Remediation grouting has been widely used for the rehabilitation of various civil works like hydraulic and traffic structures. Recently there were some cases of remediation grouting for repairing old dams in korea. So this study will describe the case of remediation grouting of the concrete dam base located east-northern part of Seoul. We use Lugeon Test and Borehole Image Processing System(BIPS) for estimating the effectiveness of remediation grouting of this project. As the results of this study, we could find the lots of joints between the old concrete body and the weathered rock base. So the about 30% quantity of total cement grouts was injected at the boundary surface between concrete and rock base. And Lugeon Test and BIPS could be compared relatively because BIPS results could be presented quantitatively as well as qualitative analysis. Finally, we could find microfine cement was very effectively injected to the fine fissured concrete body compared with ordinary portland cement, but there was little injectability differences beteween microfine cement and ordinary portland cement at the large cracks or cavities were developed rock base.

• 대한치과보철학회지
• /
• 제42권4호
• /
• pp.397-411
• /
• 2004

Purpose: The purpose of this study was to determine the effect of anchorage systems and palatal coverage of denture base on load transfer in maxillary implant-supported overdenture. Material and methods: Maxillary implant -supported overdentures in which 4 implants were placed in the anterior region of edentulous maxilla were fabricated, and stress distribution patterns in implant supporting bone in the case of unilateral vertical loading on maxillary right first molar were compared with each other depending on various types of anchorage system and palatal coverage extent of denture base using three-dimensional photoelastic stress analysis. Two photoelastic overdenture models were fabricated in each anchorage system to compare with the palatal coverage extent of denture base, as a result we got eight models : Hader bar using clips(type 1), cantilevered Hader bar using clips(type 2), Hader bar using clip and ERA attachments(type 3), cantilevered milled-bar using swivel-latchs and frictional pins(type 4). Result: 1. In all experimental models, the highest stress was concentrated on the most distal implant supporting bone on loaded side. 2. In every experimental models with or without palatal coverage of denture base, maximum fringe orders on the distal ipsilateral implant supporting bone in an ascending order is as follows; type 3, type 1, type 4, and type 2. 3. Each implants showed compressive stresses in all experimental models with palatal coverage of denture base, but in the case of those without palatal coverage of denture base, tensile stresses were observed in the distal contralateral implant supporting bone. 4. In all anchorage system without palatal coverage of denture base, higher stresses were concentrated on the most distal implant supporting bone on loaded side. 5. The type of anchorage system affected in load transfer more than palatal coverage extent of the denture base. Conclusion: To the results mentioned above, in the case of patients with unfavorable biomechanical conditions such as not sufficient number of supporting implants, short length of the implant, and poor bone quality, selecting a resilient type attachment or minimizing the distal cantilevered bar is considered to be an appropriate method to prevent overloading on implants by reducing cantilever effect and gaining more support from the distal residual ridge.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.89-92
• /
• 2009

As a class of materials, Ni-base superalloys are among the most difficult metal alloys to forge together with refractory metals and cobalt-base superalloys. The mechanical properties of Ni-base superalloys depend very much on grain size and the strengthening phases, $\gamma$' ($Ni_3$(Al,Ti)-type) and $\gamma$".($Ni_3$Nb-type). Especially, the control of grain size remains as a sole means for the control of mechanical properties. The grain size and distribution changes of the wrought superalloys during hot working and heat treatment are mainly controlled by the recrystallization and grain growth behaviors. In this presentation, prediction technology of grain size through the computer-aided process design, and numerical modeling for predicting the microstructure evolution of Ni-base superalloy during hot working were introduced. Also, some case studies were dealt with actual forming processes of Ni-base superalloys.

• 한국공간구조학회논문집
• /
• 제20권3호
• /
• pp.99-106
• /
• 2020

If an excessive displacement occurs in the base isolation system, the structure will be damaged due to overturning of the upper structure. In this study, we analyze the behavior of base isolation by applying earthquake to base isolation with anti-uplift device. In the case of structures that generate horizontal reaction forces such as arch structures, horizontal reaction forces must be considered in the design of the base isolation and structural members. And anti-uplift device for preventing the excessive displacement of the base isolation system is needed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.491-498
• /
• 2002

The rubble base in the seadike structure is construct with rubble-mound of big size for stability of seadike against a tidal current velocity at the closing. The permeability gives an effect to stability of seadike a lot in The case which rubble base is founded long with a lake direction like objective area of this study. The permeability of the rubble base produced in the model test regarding filling condition and materials of the rubble base, It applied the result which it tests in seepage analysis and it analyzed a stability of piping, In this study, it diminishes the permeability of the rubble base to respect, the pit soil more the dredge soil is effective and it was analyzed with the fact that it increases the stability of lake direction slope against the piping.

• 한국항공운항학회지
• /
• 제14권4호
• /
• pp.48-59
• /
• 2006

This Study focused on the process of technology transfer for the aircraft development program by the strategic alliance. Especially, this study showed how the learning firms absorb new technology from the foreign leading company. This case study concludes that teachability, asset specificity, relation capital with partner, information sharing system in organization and knowledge base are key factors for absorbing the new technology from the technology leading partner.

• Journal of Yeungnam Medical Science
• /
• 제39권4호
• /
• pp.341-343
• /
• 2022

To determine the vertical dimension and centric relation during the construction of implant overdentures, the record base and wax rim may need to be adjusted. The conventional method has several drawbacks, as it requires repeated tightening and loosening of the impression coping. Here, we report a useful and novel method for interocclusal records using the healing abutments in implant overdentures. Our case demonstrates that this method is easier and simpler and prevents gingival collapse.

• 미생물학회지
• /
• 제43권4호
• /
• pp.317-320
• /
• 2007

미생물 유전체 프로젝트를 수행하는 과정에서 발생하는 base-calling 오류를 포함하는 것으로 의심되는 유전자나 염기서열의 리스트를 보여 주는 프로그램을 개발하였다. 이 프로그램의 모듈들은 base-calling 오류로 의심되는 염기들의 후보군을 유전체 프로젝트를 수행하는 주요 단계에서 감지할 수 있도록 하였다. 이들 프로그램들은 초기 단계에서는 Phrap 파일에 존재하는 contig assembly 정보를 이용하여 base-calling 오류를 감지하는 모듈, 중간 단계에서는 상동성 검색 결과물로부터 frame skift 돌연변이의 진위 유무를 분석할 수 있는 모듈, 마지막 단계에서는, 이미 발표된 미생물 유전체와 같은 종으로부터 유래된 균주에 대한 유전체 프로젝트를 수행할 경우, 비교유전체 분석 기법을 활용하여 base-calling 오류 가능성이 높은 서열의 후보군을 추출하여 해당서열의 크로마토그램파일을 유전체 연구자가 볼 수 있는 모듈로 구성되어 있다.

• 전자공학회논문지CI
• /
• 제47권3호
• /
• pp.42-50
• /
• 2010

기존의 선박 USN 관련 시스템은 선박 USN에서 획득한 데이터를 단순히 모니터링 하는 데 그치고 있으므로 해양의 특성을 고려한 지능적인 의사 결정 알고리즘을 갖는 시스템 구현이 필요하다. 본 논문에서는 사례 기반 추론 기법을 이용하여 디지털 선박의 화재, 파손에 관한 사례를 지식 베이스로 구축하고 추론하는 시스템을 설계하였다. 가장 유사한 사례 추천을 위해 KNN 알고리즘을 이용하였고 화재 상황과 파손 상황 사례 베이스를 구축하기 위하여 각 상황별로 3,000 건의 데이터를 입력받아 실험하였다. 실험 결과 화재 사례와 파손 사례에 대한 평균 정확도는 약 82.5%, 80.1%를 나타냈고 유사도 분류 k 개수가 7인 경우에 최적의 수행 결과를 나타냈다. 또한, 추론된 결과를 이용하여 선박 모니터링 시스템을 구현하였다.