• 한국항해항만학회지
• /
• 제37권2호
• /
• pp.165-171
• /
• 2013

영도대교는 부산 최초의 연륙교로서 1934년 준공된 이후, 수차례의 보수보강 공사를 거쳤으며 2011년 이후 현재까지 확장 복원을 위하여 철거공사를 실시하고 있다. 본 조사연구의 목적은 영도대교 건설 당시의 교량 기술 및 재료적 특성 분석 함으로써 근대 구조에 사용된 콘크리트의 당시 재료적 특성을 파악하고 근대 교량문화유산의 보존 및 활용을 위한 기초적 자료를 구축하는 데 있다. 일련의 실험을 통하여 콘크리트 구성재료는 시멘트 : 세골재 : 굵은골재 비율이 부위에 따라 1 : 2 : 4 또는 1 : 3 : 6 인 것으로 밝혀졌고, 압축강도는 50~55MPa, 탄성계수는 25~35GPa의 범위로 나타났다. 역학적 물성의 편차가 10%이하인 점을 미뤄봐서 당시의 품질관리가 비교적 우수했던 것을 알 수 있었다. 중성화 깊이는 높은 상대습도로 상당히 낮은 값을 나타내었고, 염소이온 확산계수는 1.052e-12($m^2/s$)로서 현대 콘크리트와 비교하면 물시멘트비 35%에 상응하는 것으로 밝혀졌다.

• 대한원격탐사학회지
• /
• 제31권6호
• /
• pp.561-570
• /
• 2015

현재 위성정보 활용은 데이터 중심의 과학적 연구를 위주로 하고 있어 위성정보 처리나 응용 시스템에 대한 연구나 기술 개발은 미흡한 실정이다. 특히 위성영상정보는 다른 분야에 비하여 대용량의 정보 처리와 전문 분석 기능을 요구하기 때문에 응용 시스템 개발을 위한 연구의 필요성이 점점 부각되고 있다. 한편 정보시스템 분야에서는 웹 기반 표준과 클라우드 컴퓨팅 환경 뿐만 아니라 프레임워크 등과 같은 내용들이 적용상의 장점과 실질적인 수요에 근거하여 부각되고 있다. 이 연구에서는 오픈소스 클라우드 컴퓨팅 환경인 오픈스택(OpenStack)과 전자정부 표준프레임워크를 기반으로 하여 위성정보 처리기능을 제공하는 웹서비스 시스템을 시험 구현하였다. 처리 기능은 서로 다른 웹 서비스 시스템 간에 상호 운영이 가능하도록 GeoServer에서 지원하는 WPS를 적용하였다. 이러한 클라우드 기반 웹 서버 구축에 따라 운영되는 클라이언트 측도 HTML 5와 JQuery, OpenLayers와 같은 오픈소스를 적용하여 구현하였다. 이 연구의 결과는 추가적인 현장 적용 실험과 수요자 요구 기능 추가 실험 등을 거쳐 클라우드 컴퓨팅 환경과 전자정부 표준프레임워크, 공간정보 처리 표준 사양들이 복합적으로 요구되는 위성정보 분석 처리 시스템 구현을 위한 참고 모델로 이용될 수 있다.

• Nuclear Engineering and Technology
• /
• 제50권2호
• /
• pp.268-279
• /
• 2018

The ALCYONE multidimensional fuel performance code codeveloped by the CEA, EDF, and AREVA NP within the PLEIADES software environment models the behavior of fuel rods during irradiation in commercial pressurized water reactors (PWRs), power ramps in experimental reactors, or accidental conditions such as loss of coolant accidents or reactivity-initiated accidents (RIAs). As regards the latter case of transient in particular, ALCYONE is intended to predictively simulate the response of a fuel rod by taking account of mechanisms in a way that models the physics as closely as possible, encompassing all possible stages of the transient as well as various fuel/cladding material types and irradiation conditions of interest. On the way to complying with these objectives, ALCYONE development and validation shall include tests on $PWR-UO_2$ fuel rods with advanced claddings such as M5(R) under "low pressure-low temperature" or "high pressure-high temperature" water coolant conditions. This article first presents ALCYONE V1.4 RIA-related features and modeling. It especially focuses on recent developments dedicated on the one hand to nonsteady water heat and mass transport and on the other hand to the modeling of grain boundary cracking-induced fission gas release and swelling. This article then compares some simulations of RIA transients performed on $UO_2$-M5(R) fuel rods in flowing sodium or stagnant water coolant conditions to the relevant experimental results gained from tests performed in either the French CABRI or the Japanese NSRR nuclear transient reactor facilities. It shows in particular to what extent ALCYONE-starting from base irradiation conditions it itself computes-is currently able to handle both the first stage of the transient, namely the pellet-cladding mechanical interaction phase, and the second stage of the transient, should a boiling crisis occur. Areas of improvement are finally discussed with a view to simulating and analyzing further tests to be performed under prototypical PWR conditions within the CABRI International Program. M5(R) is a trademark or a registered trademark of AREVA NP in the USA or other countries.

• Archives of Plastic Surgery
• /
• 제34권1호
• /
• pp.18-23
• /
• 2007

Purpose: Anthropometry can be divided into two methods, direct anthropometry and indirect anthropometry. The most ideal and accurate method is a direct anthropometry. However, it is difficult to measure in the case of children because of poor cooperation, and it lacks re-productivity. Cast model has advantages of three dimensional featuring, inexpensive and easy fabrication. This study is conducted to find out an accuracy of indirect anthropometry on cast model by comparing it with direct anthropometry. Methods: Total 48 cleft lip nasal deformity patients (unilateral, 40; bilateral, 8) were included in this study. Cast models were made before surgery under general anesthesia with alginate impression material and model plaster. Eleven linear measurements among 7 landmarks were taken as direct anthropometry before surgery with Castroviejo spreading caliper. At the same time, indirect anthropometry on cast model was done at the same linear distances as well. Results: Of the total 11 linear measurements, both ala lengths, both columella lengths, nose width, projective distance between facial insertion points of the ala, projective distance between the alar base points, right nostril floor width, and columella width were statistically correlated between indirect anthropometry on cast model and direct anthropometry. However, the nasal tip protrusion and the left nostril floor width were not statistically correlated. Conclusion: Accuracy of indirect anthropometry on cast model can be influenced by cast model fabrication techniques and correct identification of landmarks. Nasal tip protrusion could be reduced by compression of the nasal tip in the process of cast model fabrication and nostril floor width can be varied by muscle relaxation of anesthetics and incorrect identification of subalare in cleft lip nasal deformity. If sufficient care is taken to make cast model and to define landmarks exactly, indirect anthropometry on cast model can be a reliable method as direct anthropometry.

• International Journal of Quality Innovation
• /
• 제8권1호
• /
• pp.40-75
• /
• 2007

In the early industrial age which with high intensity of machine and labor, using financial measurement index was good enough to tie in company's mechanization and philosophy of management and been in efficiency. But being comply with "New Economic age," a new economic environment is full of knowledge and information, the enterprise competition had changed from tangible assets, plants to intangible innovation ability of knowledge. As recognizing the new tendency by enterprise, they value gradually the growth and influence from learning. Practice of organization learning not only needs firm structure and be in coordination with both hardware and software, but also needs an affect measurement model to offer enterprise to estimate learning performance. It's a good instrument of financial performance measure mold in the past years, But it's for measuring the past, couldn't formulate enterprise trend to future, hard to estimate investment for future, such as development of products, organization learning, knowledge management etc, as which intangible assets and knowledge ability just the key factors of being win around competition environment in the future. In 1992, Kaplan and Norton brought up Balance Scorecard (BSC) on Harvard Business Review, as an instrument helping enterprise to measure performance, which is being considered to be a most influence management instrument. It added non-financial index such as customer, internal process and learning growth besides traditional financial index, as offering enterprise an index to measure and manage intangible assets and intellectual property. As being aware of organization learning is hard to be ignored in the new economic age, this research is based on learning and growth of BSC, and citing one national material company try to let the most difficult measurement performance of organization learning, to be estimate through BSC, analyze of factor and individual case, to discuss the company how to make the related strategy and vision of organization learning to develop learning and growth of the structure of BSC, subject the matter of out put factors to be discussed, and measure the outcomes as a result of research. The research affect offers (1) the base implement procedure of carrying out BSC; (2) the reference of formulating measurement index while enterprise using BSC to estimate performance of organization learning; (3) the possibility bottleneck maybe forcing while carrying out BSC, to be an improvement or preventive for enterprise.

• 터널과지하공간
• /
• 제15권2호
• /
• pp.111-118
• /
• 2005

연구지역은 옥천변성대에 속하며 단층파쇄대가 터널굴착방향과 평행하게 존재하여 막장면의 자립성 저하 및 이에 따르는 터널 주변지반의 이완 등으로 터널 내에 과도한 변위가 발생하였다. 이에 따라 단층파쇄대의 영향범위를 파악하고 특성을 분석하기 위하여 TSP(Tunnel Seismic Prediction)탐사를 수행하였다. 또한 막장면 조사와 시추조사를 병행 실시하여 거동원인을 분석하고 전방 파쇄대의 예측을 통하여 터널 굴착 및 지보에 영향을 주는 지질구조대나 용수대의 위치와 규모를 확인하였다. 조사결과를 토대로 터널형상 및 그에 따른 지층상태를 3차원으로 모델링 하였다. 모델링된 개체 내에 포함된 여러 변수(함유량, 물성치, 암반등급 등 모든 정량적인 수치)는 지구통계학적 기법을 통해 분석하였다. 모델링 결과를 분석하면 단층파쇄대에 의한 풍화대의 분포가 터널우측을 중심으로 발달하면서 좌측으로 그 범위가 감소하고 있다. 단층파쇄대는 주향 $N0\~5^{\circ}E$, 경사 NW의 방향성을 가지며, 여러 개의 지질이상대를 포함한 대규모의 파쇄대로 이루어진 것으로 확인되었다. 터널내 과대 변위는 해당구간에 밀집된 불연속면의 상호교차 및 단층대에 의한 터널 좌우측 암반강도 불균형으로 편하중이 발생한 것으로 판단되며 그라우팅 등의 터널보강공법이 필요한 것으로 판단된다.

• 한국광물학회:학술대회논문집
• /
• 한국광물학회.한국암석학회 2003년도 공동학술발표회 논문집
• /
• pp.66-66
• /
• 2003

King George island, Antarctica, is mostly covered by ice sheet and glaciers, but the land area is focally exposed for several thousand years after deglaciation. For a mineralogical study of chemical weathering in the polar environment, glacial debris was sampled at the well-developed patterned ground which was formed by long periglaclal process. As fresh equivalents, recently exposed tills were sampled at the base of ice cliff of outlet glaciers and at the melting margin of ice cap together with fresh bedrock samples. Fresh tills are mostly composed of quartz, plagioclase, chlorite, and illite, but those derived from hydrothermal alteration zone contain smectite and illite-smectite. In bedrocks, chlorite was the major clay minerals in most samples with minor illite near hydrothermal alteration zone and interstratified chlorite-smectite in some samples. Smectite closely associated with eolian volcanic glass was assigned to alteration in their source region. Blocks with rough surface due to chemical disintegration showed weathering rinds of several millimeter thick. Comparision between inner fresh and outer altered zones did not show notable change in clay mineralogy except dissolution of calcite and some plagioclase. Most significant weathering was observed in the biotite flakes, eolian volcanic glass, sulfides, and carbonates in the debris. Biotite flakes derived from granodiorite were altered to hydrobiotite and vermiculite of yellow brown color. Minor epitactic kaolinite and gibbsite were formed in the cleaved flakes of weathered biotite. Pyrite was replaced by iron oxides. Calcite was congruently dissolved. Volcanic glass of basaltic andesite composition showed alteration rim of several micrometer thick or completely dissolved leaving mesh of plagioclase laths. In the alteration rim, Si, Na, Mg, and Ca were depleted, whereas Al, Ti, and Fe were relatively enriched. Mineralization of lichen and moss debris is of much interest. They are rich of A3 and Si roughly in the ratio of 2:1 to 3:1 typical of allophane. In some case, Fe and Ti are enriched in addition to Al and Si. Transmission electron microscopy of the samples rich of volcanic glass showed abundant amorphous aluminosilicates, which are interpreted as allophane. Chemical weathering in the King George Island is dominated by the leaching of primary phyllosilicates, carbonates, eolian volcanic glass, and minor sulfides. Authigenesls of clay minerals is less active. Absence of a positive evidence of significant authigenic smectite formation suggests that its contribution to the clay mineralogy of marine sediments are doubtful even near the maritime Antarctica undergoing a more rapid and intenser chemical weathering under more humid and milder climate.

• Journal of Preventive Medicine and Public Health
• /
• 제26권2호
• /
• pp.293-309
• /
• 1993

With expanded and extended coverage of the national medical insurance and fast growing health care expenditures, appropriateness of health service utilization and quality of care are concerns of both health care providers and insurers as well as patients. An accurate patient classification system is a basic tool for effective health care policies and efficient health services management. A classification system applicable to Korean medical information-Korean Diagnosis Related Groups (K-DRGs)-was developed based on the U.S. Refined DRGs, and the performance of the developed system was assessed in this study. In the process of the development, first the Korean coding systems for diagnoses and procedures were converted to the systems used in the definition of the U.S. Refined DRGs using the mapping tables formulated by physician panels. Then physician panels reviewed the group definition, and identified medical practice patterns different in two countries. The definition was modified for the differences in K-DRGs. The process resulted in 1,199 groups in the system. Several groups in Refined DRGs could not be differentiated in K-DRGs due to insufficient medical information, and several groups could not be defined due to procedures which were not practiced in Korea. However, the classification structure of Refined DRGs was retained in K-DRGs. The developed system was evaluated fur its performance in explaining variations in resource use as measured by charges and length of stay(LOS), for both all and non-extreme discharges. The data base used in this evaluation included 373,322 discharges which was a random sample of discharges reviewed and payed by the medical insurance during the five-month period from September 1990. The proportion of variance in resource use which was reduced by classifying patients into K-DRGs-r-square-was comparable to the performance of the U.S. Refined DRGs: .39 for charges and .25 for LOS for all discharges, and .53 for charges and .31 for LOS for non-extreme discharges. Another measure analyzed to assess the performance was the coefficient of variation of charges within individual K-DRGs. A total of 966 K-DRGs (87.7%) showed a coefficient below 100%, and the highest coefficient among K-DRGs with more than 30 discharges was 159%.

• Korean Journal of Acupuncture
• /
• 제37권3호
• /
• pp.172-182
• /
• 2020

Objectives : In this study, we conducted a focus group interview among expatriates living in Korea, to investigate their experiences and perceptions of acupuncture and Korean Medicine in order to improve the usage of Korean Medicine in the medical tourism market. Methods : The inclusion criteria for the focus group interview was: (1) participants between the age of 20 to 75 years old; (2) those who had lived in Korea for more than 90 days, and (3) those who were able to express their thoughts freely in English. The participants were informed that the interviews will be recorded and transcribed. We ended recruitment once saturation of materials was met. Semi-structured interviews were conducted, and the data was analyzed after each interview. Results : The interviews were held between June to December 2016. Twenty-four participants were recruited but four dropped out and a total of twenty participants successfully finished the interviews. Six focus group interviews were conducted. Analysis revealed that Korean Medicine was relatively less known compared to Traditional Chinese Medicine or Complementary and Alternative Medicine. Participants automatically associated acupuncture with the management of pain or stress and replied that these were the areas that they thought acupuncture would be most effective. Positive experiences with acupuncture and with the acupuncture practitioners were factors that promoted the use of acupuncture whereas lack of awareness, accessibility and accreditation were factors that hindered its use. Other factors that hindered the use of acupuncture was needle phobia and the perception that acupuncture lacks scientific evidence. Conclusions : Awareness on Korean Medicine and acupuncture is low. Participants lack awareness on what diseases acupuncture can treat, the scientific evidence behind the mechanism of action, and the rigorous education system that Korean Medicine doctors must go through to get their license. Rigorous marketing should be encouraged, which includes greater exposure in the media, more honest reviews from patients, and promotion of the scientific evidence base.

• 대한기계학회논문집B
• /
• 제41권2호
• /
• pp.97-107
• /
• 2017

본 논문은 반 쐐기형 연소실에서 포트형상에 따른 정상유동 특성을 비교한 연구의 두 번째로 유동 평가위치의 영향을 고찰한 것이다. 입자영상유속계로 반 쐐기형 연소실에 직선형 포트와 나선형 포트를 적용하여 측정위치를 헤드 밑면부터 하류로 보어의 1,75배 위치 즉 1.75B부터 6배 위치 즉, 6.00B까지 변경하면서 평면유속을 측정하였다. 속도분포 분석 결과 반 쐐기형 연소실을 채택하면 지붕형과 달리 동일 리프트에서 거시적 유속분포와 유선은 스월 거동 중심은 측정위치가 관계없이 거의 일정하다. 직선형 포트에서는 모든 측정위치에서 편심도는 충격식 스월 측정기에서 측정값 왜곡이 발생하는 범위에 들어오고, 나선형 포트에서도 리프트 4mm 이하에서는 모든 측정위치에서 편심의 영향을 무시할 수 없지만, 측정위치가 3.00B 이상이 되면 리프트 5mm 이상에서 편심도가 급격히 감소한다. ISM가정과의 속도분포 차이에 의해 직선형 포트의 리프트 4mm 이하 스월 중심 평가를 제외하고 모든 PIV 평가방법에서 ISM 평가 대비 상대적인 상쇄효과가 있다. 마지막으로 중심 설정과 축 방향 속도분포 가정은 스월 평가에 정성적 영향을 주지 않고, 구체적인 접선속도 분포형태에 따라 절댓값에만 영향을 준다.