• 열처리공학회지
• /
• 제12권1호
• /
• pp.55-65
• /
• 1999

Graphitization of cementite in high carbon steels at subcritical temperature is reported. We have studied about the effects of Ni in these steels on graphitization. The chemical compositions of the specimens were Fe-(0.54, 0.7)%-C-1.0%Si-0.1%Mn-(0.2~1.0)%Ni. After annealing at $650^{\circ}C$, $680^{\circ}C$ and $700^{\circ}C$ during various time the microstructures and hardness change were observed. In order to recover the initial hardness of high carbon steel, dissolution treatment of graphite was performed at $870^{\circ}C$. In case of 0.7%C steel, graphitization was accelerated rather 1.0%Ni addition steel than 0.2% and 0.54%Ni addition steels but the graphite is coarser. In case of 0.54%C-0.2%Ni steel, graphite particles were distributed relatively homogeniously and finely. Nickel addition promotes graphitization of these steels but makes graphite blocky.

• 한국수소및신에너지학회논문집
• /
• 제16권2호
• /
• pp.191-198
• /
• 2005

Adding hydrogen gas in natural gas leads to stable combustion in internal combustion engine and its performances rely on compression ratio. To analyze the effects of compression ratio and rate of hydrogen addition on the engine performance, the characteristics of overall engine performance including emission were investigated by using the medium duty natural gas fueled engine. As results, it was found that compression ratio occurred knock was nearby compression ratio, $\varepsilon$=14 for the case that hydrogen was enriched in the natural gas fueled engine. But slight knock was occurred at $\varepsilon$=14.7 in the case of neat natural gas. Also HC and $CO_2$ were reduced around 80% and 20% respectively when the rate of hydrogen addition was increased to 50% and compression ratio from $\varepsilon$=13 to $\varepsilon$=14.7.

• 한국지반신소재학회논문집
• /
• 제23권1호
• /
• pp.49-60
• /
• 2024

최근 기후변화 등 달라진 해양 환경으로 인해 태풍 파랑의 빈도 및 강도가 증가하고 있다. 뿐만 아니라 일본, 칠레, 아이티, 중국, 인도네시아 등 세계적으로 잦은 지진으로 인해 많은 피해가 발생하고 있다. 우리나라 역시 2000년대에 들어서 태풍에 의한 피해가 증가하고 있으며, 지진의 발생 빈도와 강도도 증가하고 있다. 우리나라는 삼면이 바다로 되어있어 태풍에 의해 해안구조물에 많은 피해가 발생할 수 있으며 지진 역시 해안구조물에 많은 피해를 야기시킨다. 이처럼 국내·외적으로 태풍 파랑과 지진의 빈도 및 강도가 증가하는 추세이나 태풍과 지진을 연계한 연구는 전무하다. 따라서, 본 연구에서는 케이슨식 방파제에 태풍 파랑과 지진을 연계하여 총 4가지 Case에 대해 수치해석을 수행하였다. Case 1은 파랑하중, Case 2는 지진파를 각각 적용하였고, Case 3은 파랑하중 이후 지진 발생, Case 4는 지진파 이후 파랑하중까지 적용하여 수치해석을 수행하였다. 수치해석 결과 태풍과 지진을 연계한 Case 3과 Case 4의 경우 기존에 지반의 강도가 저하된 상태에서 하중을 적용하여 각 하중에 의한 피해가 Case 1과 Case 2에 비해 증가한 것을 확인하였다. 또한, 파랑하중 이후 지진파를 적용한 Case 3에서 피해가 가장 큰 것을 확인하였다.

• 대한수학회지
• /
• 제34권2호
• /
• pp.371-381
• /
• 1997

Our basic concern in this paper is to investigate some geometric properties of the graph of a maximal monotone operator in the one dimensional case. Using a well-known theorem of Minty, we answer S. Simon's questions affirmatively in the one dimensional case. Further developments of these results are also treated. In addition, we provide a new proof of Rockafellar's characterization of maximal monotone operators on R: every maximal monotne operator from R to $2^R$ is the subdifferential of a proper convex lower semicontinuous function.

• 셀메드
• /
• 제4권2호
• /
• pp.13.1-13.6
• /
• 2014

The written case that reflects the course of treatment for a person is central to the East Asian medical tradition. This paper examines the approaches and particularities of producing the actual written account of the clinical encounter, or a particular aspect of a case, that may be required by acupuncture practitioners and researchers. It will discuss the influences that can be brought to bear on the construction and production of these accounts. In addition, it will outline and highlight historical approaches to the case record documentation process as well as debate the value and purpose of these. This paper aims both to assist the production of helpful and authoritative case records for practitioners and researchers, and to highlight the usefulness of such case records. Moreover, it will discuss not only why the case needs to be written and for whom, but also which agencies support and control what is written. How can contemporary requirements and traditional views both be incorporated accurately, with context and with meaning? The essence of this paper is that practitioner/patient interactions need to be documented, and it will explore how this can best be supported.

• 한국소음진동공학회논문집
• /
• 제11권9호
• /
• pp.414-421
• /
• 2001

If a machine has some faults, we can detect them using vibration or noise signals. However some maintenance engineers who don\`t have export knowledge, need the help of vibration experts for diagnosing the machine. In this paper a case based reasoning (CBR) system is developed which is able to manipulate the past experiences of vibration diagnosis experts. In the CBR system, the maintenance engineers can retrieve the information form previous cases which are most similar to new problem s that they can solve new problem using solutions form the previous cases. In this paper, a new case retrieval method of CBR system using Petri net is proposed and also applied to diagnosis for electric motors as a practical problem.

• 패션비즈니스
• /
• 제8권1호
• /
• pp.141-155
• /
• 2004

Chitosan, the natural biodegradable polymer derived from chitin by de- acetylation, has been widely applied to the textile finishing processes for excellent anti-microbial characteristic and handle improvement of fabric. The purpose of this study is to investigate the change of handle when cotton fabric is treated with chitosan-polyurethane mixed solution. The viscosity values of chitosan solutions were 8cps and 50cps, and the wet-pick-up% was maintained at 90%. In case of mixing with water soluble polyurethane, the mixture ratio of chitosan and polyurethane was settled on the solid content ratio of 1:0, 1:0.5, 1:1, 1:2. Also the change of physical properties by neutralization in NaOH solution was studied. The results can be summarized up as follows : 1. Extensibility(EM) and tensile energy(WT) of cotton fabric treated with chitosan are decreased, but bending rigidity(B) is remarkably increased. With the addition of polyurethane, the decrease of EM and WT is weakened and the increase of B is weakened. The case of neutralization is similar to the case of polyurethane addition. 2. By treating fabric with chitosan, FUKURAMI(Fullness and softness) is decreased, but KOSHI(Stiffness), SHARI(Crispness), HARI(Anti-drape Stiff ness) are increased. With the addition of polyurethane, the decrease of FUKURAMI is diminished and the increase of KOSHI, SHARI, HARI are diminished. 3. As the viscosity of chitosan solution increased, the air permeability value increased. The addition of polyurethane decreased the air permeability.

• 한국축산시설환경학회지
• /
• 제14권2호
• /
• pp.91-96
• /
• 2008

The odours from spreading the slurry, manure storage tanks, and the stall are a source of annoyance for the neighbors and sometimes even become a case for civil appeal. Reducing the odourant and ammonia emission is an urgent need to be addressed. It is known that brown coal and oak charcoal have an ability to absorb odour. We designed an experiment set in lab scale and used the brown coal and oak charcoal as additives in the test to reduce odour. The test are divided into two categories; namely aeration and no-aeration. The additives were added to the each sample at a concentration of 5% and 10% of total base solids, besides the control samples. We carried out the Phenate Method for ammonia analyzing. In the non-aerated case, the results showed a reducing efficiency of 23.7% and 26.4% with an addition rate of 5% and 10% of additives, respectively. In the aerated test, the reducing efficiency of ammonia was 17.8% and 21.0% with an addition rate of 5% and 10% of additives, respectively. In case of oak charcoal, non-aeration showed removal efficiencies of ammonia at 15.9% and 16.1% with addition rates of 5% and 10%, respectively, With aeration, they were 11.4% and 26.4% with addition rates of 5% and 10% oak charcoal, respectively. The tests show that brown coal and oak charcoal have a reducing effect on ammonia emissions.

• Human Ecology Research
• /
• 제60권2호
• /
• pp.303-315
• /
• 2022

The physicochemical properties of traditional kochujang added with naked oat flours (0, 5, 10, 15%) were periodically examined during fermentation for 20 weeks at 25℃(± 2 ℃). The proximate composition of roasted naked oat flours were as follows: water 0.67%, ash 1.63%, fat 10.37%, protein 13.63%, carbohydrates 73.70%. The water contents of traditional kochujang added with naked oat flours decreased gradually according to the addition level. The pH of traditional kochujang added with naked oat flours increased according to the added level, whereas pH decreased gradually during fermentation. The acidity was opposite to pH. The L (lightness), a (redness) and b (yellowness)-values of samples increased according to the amount of added naked oat flours, whereas they decreased gradually during fermentation. The salinity and sweetness of samples decreased according to the amount of added naked oat flours. Amino acid composition of traditional kochujang added with naked oat flours was higher than that of the control during fermentation. Aspartic acid, alanine, leucine, and arginine were high in the case of traditional kochujang added with 0% naked oat flours, and aspartic acid, leucine, alanine, proline. And arginine were high in the case of traditional kochujang added with 15% naked oat flours. The dietary fiber content was 5.38g/100g in the case of 0% addition and 5.75g/100g in the case of 15% addition. As a result of the above results, it was found that the physicochemical properties of traditional kochujang added with naked oat flours could be improved, and the possibility of developing a traditional kochujang beneficial to health was confirmed.

• 한국세라믹학회지
• /
• 제33권9호
• /
• pp.1038-1044
• /
• 1996

The variations of sintering and electrical characteristics of semiconducting BaTiO3 ceramics with sintering agents added were investigated comparing the case of BaB2O4 addition to BN and TiO2 addition. When BaB2O4 added in BaTiO3 ceramics the densitifcation of specimen could be acheived more easily and recvealed the better PTCR characteristics than BN and TiO2 addition. As increase of addition of BaB2O4 in BaTiO3 spec imens the slope of resistivity jump also increased but the temperature of maximum resistivity decreased, It was supposed that addition of BaB2O4 led to increase of Ns (acceptor state density) value at grain boundaries.