• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.131-135
• /
• 2003

WDM(Wavelength division multiplexing) light wave communication system requires MUX/DeMUX and optical filter OADM can be used to extract and add the specific wavelength channel from the transmission line. In this paper, we propose the OADM based on MZI and cascade FBG. It is able to minimize system and reduce sidelobe. So, we have considered MZI structure and 3dB coupler. Using the coupled mode theory. We also analyze out characteristics of OADM and experiment. From results obtained by experiment and computer. Simulation, the proposed OADM with cascade FBG works well. we hope that the obtained result in this paper con be used as the data to design the OADM with cascade FBG.

• Journal of Mechanical Science and Technology
• /
• 제19권12호
• /
• pp.2303-2311
• /
• 2005

Super low temperature has many applications nowadays, from the chemical processing, automotives manufacturing, plastic recycling, etc. Considering of its wide application in the present and the future, study of the super-low temperature refrigeration system should be actively carried out. Super low state temperature can be achieved by using multi-stage refrigeration system. This paper present the development and testing of cascade refrigerator system for achieving super-low temperature. On this experiment, two different types of HCFCs refrigerants are utilized, R-22 and R-23 were applied for the high stage and the low-pressure stage respectively. The lowest temperature in the low-pressure evaporator that can be achieved by this cascade refrigeration system is down to $-85^{\circ}C$. This experiment is aimed to study the effect of inlet pressure of the low-pressure stage evaporator and low-pressure stage compressors inlet pressure characteristics to the overall temperature characteristics of cascade refrigeration system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.561-567
• /
• 2000

This paper is concerned with the viscous interaction between rotor and stator. The viscous interaction is caused by wakes from upstream blades. The rotor cascade in the experiment was composed with five blades, and cylinders were placed to make the stator wakes and their locations were about 50 percent upstream of blade chord. The locations of cylinders were varied in the direction of cascade axis with 0, 12.5, 25, 50, and 75 percent of pitch length. The static pressure distributions on the blade surfaces and the velocity distributions in the cascade flow were measured. From the experimental result it was found that the value of velocity defect by a cylinder wake might vary depending on the wake position within the cascade but the value at the cascade exit approached to some constant value regardless of the difference of wake locus. The momentum defect at the downstream from the cascade and the pressure distribution on the blade surfaces showed that the wake flowing near the blade surfaces caused the decrease of lift and the increase of drag regardless of the disappearance of flow separation.

• 한국지능시스템학회논문지
• /
• 제19권3호
• /
• pp.329-336
• /
• 2009

본 논문은 회전형 역 진자 시스템(Rotary Inverted Pendulum System : RIPS)의 제어를 위한 Fuzzy cascade 제어구조를 제안하고 병렬유전자 알고리즘의 하나인 계층적 공정 경쟁 기반 유전자 알고리즘(Hierarchical Fair Competition-based Genetic Algorithms : HFCGA)을 이용한 최적화 방법을 제시한다. 회전형 역 진자 시스템은 Rotating arm의 회전을 통해 Pendulum의 각도를 제어하는 시스템으로써 제어 목적은 Rotating arm을 원하는 위치에 오게 하고 진자를 수직 위치의 불안정 평형 점에 위치하도록 하는 것이다. 본 논문에서는 회전형 역 진자 시스템의 제어를 위해 두개의 Fuzzy 제어기로 구성된 Fuzzy cascade 제어 구조를 설계하고, HFCGA를 이용하여 설계된 제어기의 파라미터를 최적화한다. 시뮬레이션 및 실험에서 SGA와 HFCGA의 성능비교를 통해 HFCGA의 우수성을 보이고, LQR 및 PD cascade 제어기와 제안된 Fuzzy cascade 제어기의 성능 비교를 통하여 제안된 방법의 우수성을 보인다.

• 대한임베디드공학회논문지
• /
• 제3권2호
• /
• pp.119-125
• /
• 2008

This paper presents the polygon-based Q-leaning and Cascade Support Vector Machine algorithm for object search with multiple robots. We organized an experimental environment with ten mobile robots, twenty five obstacles, and an object, and then we sent the robots to a hallway, where some obstacles were lying about, to search for a hidden object. In experiment, we used four different control methods: a random search, a fusion model with Distance-based action making (DBAM) and Area-based action making (ABAM) process to determine the next action of the robots, and hexagon-based Q-learning and dodecagon-based Q-learning and Cascade SVM to enhance the fusion model with DBAM and ABAM process.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.807-812
• /
• 2004

In this paper, a small supersonic wind tunnel was designed and built to study the flow characteristics of a supersonic impulse turbine cascade by experiment. The flow was visualized by means of a single pass Schlieren system. The supersonic cascade with 3-dimensional supersonic nozzle was tested over a wide range of pressure ratio. Highly complicated flow patterns including shocks, nozzle-cascade interaction and shock boundary layer interactions were observed.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2867-2873
• /
• 2020

In reprocessed uranium, derived from an impoverished fuel of light-water moderated reactors, there are isotopes of ^{232, 234, 236}U, which make its recycling remarkably difficult. A method of concentration of ²³⁵U target isotope in cascade's additional product was proposed to recover the isotopic composition of reprocessed uranium. A general calculation procedure is presented and a parameters' optimization of multi-flow cascades with additional products. For the first time a numeric model of a cascade that uses the cuts of partial flows of stages with relatively high separation factors was applied in this procedure. A novel computing experiment is carried out on separation of reprocessed uranium hexafluoride with providing a high concentration of ²³⁵U in cascade's additional product with subsequent dilution. The parameters of cascades' stages are determined so as to allow reducing the ^{232, 234, 236}U isotope content up to the acceptable. It was demonstrated that the dilution of selected products by the natural waste makes it possible to receive a low enriched uranium hexafluoride that meets the ASTM C996-15 specification for commercial grade.

• International Journal of Fluid Machinery and Systems
• /
• 제4권4호
• /
• pp.360-366
• /
• 2011

Thin circular-arc blade is often used as a guide vane, a deflecting vane, or a rotating blade of low pressure axial-flow turbomachine because of its easy manufacture. Ordinary design of the blade elements of these machines is done by use of the carpet diagrams for a cascade of circular-arc blades. However, the application of the carpet diagrams is limited to relatively low cambered blade operating under optimum inlet flow conditions. In order to extend the applicable range, additional design data is necessary. Computational fluid dynamics (CFD) is a promising method to get these data. In this paper, two-dimensonal cascade performances of circular-arc blade are widely analyzed with CFD. The results have been compared with the results of experiment and potential theory, and useful information has been obtained. Turning angle and total pressure loss coefficients are satisfactorily predicted for lowly cambered blade. For high camber angle of $67^{\circ}$, the CFD results agree with experiment for the angle of attack less than that for shockless inlet condition.

• 태양에너지
• /
• 제17권1호
• /
• pp.35-46
• /
• 1997

In this study comparison of experiment results with the computed results of linear theory and nonlinear theory using singularity method was obtainable. Specially singularity points like sources and vortexes on hydrofoil and freestreamline were distributed to analyze two dimensional flow field of supercavitating cascade using nonlinear theory, and governing equations of flow field were derived and hydraulic characteristics of cascade were calculated by numerical analysis of the governing equations. The results compared linear theory and nonlinear theory with the experiment results of the study are as follows: The tolerances of nonlinear theory were larger than those of linear theory in case of ${\alpha}<10^{\circ}$. Moreover the computational range of attack angles could be expanded from ${\alpha}=10^{\circ}$ to ${\alpha}=25^{\circ}$, the flow field of supercavitating cascade could be analyzed in the condition which the wake thickness and the length of cavity are a variable. The shapes of cavity were changed sensitively according to various variable such as attack angles, pitches and wake thickness, and the pressure distribution of hydrofoil surface was identical almost disregarding wake thickness but changed largely according to attack angle and the length of cavity. Lift coefficient and drag coefficient were reduced according to increasing of wake thickness but the influences of wake thickness were very little in the situation of small pitch and long cavity.

• 한국전자통신학회논문지
• /
• 제15권2호
• /
• pp.273-284
• /
• 2020

본 논문은 현재 자동화 공정에서 널리 쓰이는 델타 로봇을 저가형 DC 모터로 제작 및 제어하는 방법을 제안한다. 델타 로봇의 기구학 및 동역학을 해석하여 시뮬레이션을 한 후, 이를 기반으로 저가형 DC 모터를 선정하였다. 실험을 통하여 모터의 특성 값들을 획득하고 제어 이론을 적용하여 전류-위치 Cascade 제어 시스템을 설계하였다. 설계한 시스템의 성능을 검증하기 위해서 델타 로봇의 말단효과장치의 목표 경로를 설정하여 실험을 진행하였다. 실험을 통하여 저가형 모터를 사용함으로서 발생하는 문제점들을 보상 알고리즘을 설계하여 극복하고 End-effector의 위치 제어 성능을 입증하였다.