• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1317-1326
• /
• 2017

The cascaded H-bridge (CHB) multilevel converter is a promising topology for large-scale photovoltaic (PV) systems. The output voltage over-modulation derived by the inter-module active power imbalance is one of the key issues for CHB PV systems. This paper proposed a dynamic power distribution strategy to eliminate the over-modulation in a CHB PV system by suitably redistributing the reactive power among the inverter modules of the CHB PV system. The proposed strategy can effectively extend the operating region of the CHB PV system with a simple control algorithm and easy implementation. Simulation and experimental results carried out on a seven-level CHB grid-connected PV system are shown to validate the proposed strategy.

• 대한한의학회지
• /
• 제25권3호
• /
• pp.1-11
• /
• 2004

Objectives : This study was carried out to investigate the effect of Samooltang (SMT) on the injury of gastric mucous membrane by ethanol in mice. Methods : The normal group was mice with no inflammation. The control group was mice with gastro-inflammation elicited by ethanol. The sample group was SMT-administered mice before gastro-inflammation elicitation. Results : In the immunohistochemical change, the distribution of SBA and COX-1 treated with SMT noticeably increased over the control group (p<0.05). The distribution of NF-κB P50, COX-2, and TUNEL treated with SMT noticeably decreased over the control group (p<0.05). The distribution of SMT was the same as the normal group. Conclusions : According to the above results, it is supposed that SMT would be helpful against gastritis and gastric ulcer caused by alcoholic drinks.

• 에너지공학
• /
• 제24권2호
• /
• pp.110-114
• /
• 2015

A numerical investigation has been carried out on recirculation zone formed downstream of a compressible flow over a backward facing step. The study has been performed by solving Two-Dimensional Navier-Stokes equations. The system of governing equations has been solved, using an explicit Harten-Yee Non- MUSCL Modified flux type TVD scheme and a zero-equation algebraic turbulence model to calculate the eddy viscosity coefficient. The recirculation region dimensions are characterized over a range of Mach numbers of fixed step height 5mmThe detail of recirculation zone such as pressure, temperature, recirculation length, strength etc are reported. The variations of these characteristics due to change of Mach number are also presented.

• 한국자동차공학회논문집
• /
• 제9권4호
• /
• pp.92-102
• /
• 2001

The effect of ethanol-blending on the performances of the MPI gasoline engine was examined. The experiments were carried out for the stoichiometric conditions under MBT spark timing over various operating conditions. The blending rate of ethanol were determined as 10 to 30 percent according to the analysis of the properties of blended fuels. The engine with ethanol-blended fuels showed improved performances such as brake torque, brake power, brake thermal efficiency and exhaust emissions compared with those of pure gasoline over most operating conditions. Though the brake specific fuel consumption was increased by ethanol-blending due to their lower heating values, the increasing rates of the brake specific fuel consumption were limited to the half of the blending rates owing to the increase in the thermal efficiency.

• 한국잠사곤충학회지
• /
• 제42권2호
• /
• pp.99-103
• /
• 2000

This study was carried out to investigate incubating characteristics, LTSEM observation, nature of a disease of infected silkworms(bombyx mori), LD$\_$50/, optimum infective condition for mass production and infection percentage(%) on conservation periods. On the V8 media, the colony was 0.5∼2.0cm/8 days in diameter and white or slighty colored with a white fluffy to powdery appearance. The conidia was subglobos in shape, zig-zag appearance, 1-celled, hyaline and 3.2$\times$2.4 ㎛ in size on the average. The conidiophore was irregular grouped, hyaline, rounded or flask-shaped. The LD$\_$50/ values of the 2nd and 4th silkworms were each other 6.6142(Log) in natural temperature and humidity (25$\^{C}$, 65%). On optimum infective condition for mass production, all of preservation time(hr.) postinoculation in 1.0$\times$10$\^$8/ conidia/㎖ was over 97% and only 20 hr in 1.0$\times$10$\^$7/ condia/㎖ was over 90%.

• Journal of Welding and Joining
• /
• 제31권5호
• /
• pp.1-6
• /
• 2013

In carrying out the elastic-plastic analysis, four conditions (equilibrium equation, constitutive equation, condition of compatibility and yield condition) should be satisfied. In welding, the temperature largely changed from a melting temperature to a room temperature. So, yield stress of materials largely changed, too. In particular, yield stress becomes about zero over $700^{\circ}C$. The analysis should be carried out under the condition that equivalent stress generated in temperature increment ${\Delta}T$ did not exceed yield stress of materials at high temperature over $700^{\circ}C$. It should be sufficiently recognized that the obtained results were not reliable if this condition was not satisfied.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.2113-2116
• /
• 2007

In this study, transmission and reflection of multi-directional random waves propagating over multi-arrayed submerged breakwaters are investigated using eigenfunction expansion method. The numerical analysis on the wave energy reflection of submerged breakwaters with various crown widths is carried out. Strong wave reflection is occurred at the Bragg reflection condition of the peak frequency. When relative heights and crown widths of breakwaters are equal to 0.6 and 0.4h, respectively, more than 25% of wave energy is reflected to off shore.

• 로봇학회논문지
• /
• 제2권2호
• /
• pp.161-167
• /
• 2007

It is dangerous that an inspector overhauls defects and condition of the inner parts of an oil tanker because of many harmful gases, complex structures, and etc. However, these inspections are necessary to many oil tankers over old years. In this study, we proposed the design of mobile robot for inspection of CAS in oil tanker. The developed CAS inspection mobile robot has four modules, a measurement module of oil tanker's thickness, a corrosion inspection module, a climbing module of the surface on a wall, and a monitoring module. In order to get over at a check position, the driving control algorithm was developed. Magnetic wheels are used to move on the surface of a wall. This study constructed a communication network and the monitoring program to operate the developed mobile robot from remote sites. In order to evaluate the inspection ability, the experiments about performance of CAS inspection using the developed mobile robot have been carried out.

• Computational Structural Engineering : An International Journal
• /
• 제2권1호
• /
• pp.11-17
• /
• 2002

Cost-effectiveness in design is considered for determining the target reliability of concrete bridges under seismic actions. This objective can be achieved based on the economic optimization of the expected life-cycle cost of a bridge, which includes initial cost, direct losses, and indirect losses of a bridge due to strong earthquakes over its lifetime. A separating factor is defined to consider the redundancy of a transportation network. The Park-Ang damage model is employed to define the damage of a bridge under seismic action, and a Monte Carlo method based on the DRAIN-2DX program is developed to assess the failure probability of a bridge. The results for an example bridge analyzed in this paper show that the optimal target failure probability depends on the traffic volume carried by the bridge and is between 1.0×10/sup -3/ to 3.0×10/sup -3/ over a life of 50 years.

• Journal of Welding and Joining
• /
• 제18권6호
• /
• pp.62-67
• /
• 2000

Metallurgical characteristics of bonded region and high temperature mechanical properties of heat resistant alloy, Fe-35Ni-26Cr during liquid phase diffusion bonding were investigated employing AM17 insert metal. The insert metal for bonding, AM17 was newly developed Ni-base metal using interpolation method. Bonding of specimens were carried out at 1,403~1,463K for 600s in vacuum. The microconstituents in the bonded interlayer disappeared in the bonding temperature over 1,423K. The microstructures, alloying elements and hardness distribution in the base metal. The tensile strength and elongation of the joints at elevated temperatures were the same level as one of the base metal in the bonding temperature over 1,423K. The creep rupture strength and rupture lives of joints were almost identical to those of base metal.