• Asian-Australasian Journal of Animal Sciences
• /
• 제32권1호
• /
• pp.58-62
• /
• 2019

Objective: The oxidized low density lipoprotein receptor 1 (OLR1) gene plays an important role in the degradation of oxidized low-density lipoprotein and adipocyte proliferation in mammals. For this reason, we aimed at investigating the association of OLR1 gene polymorphisms with carcass quality traits in Chinese Qinchuan cattle. Methods: The single nucleotide polymorphism (SNP) was identified in the 3' untranslated region of bovine OLR1 gene by DNA sequencing. In addition, the haplotype frequency and linkage disequilibrium estimates of three SNPs were evaluated in 520 individuals. Results: Results indicated that the studied three SNPs were within the range of moderate genetic diversity (0.25< polymorphism information content<0.5). Haplotype analysis of three SNPs showed that ten different haplotypes were identified, but only five haplotypes were listed as those with a frequency of <0.05 were excluded. The Hap3 ($-G_1T_2C_3-$) had the highest haplotype frequency (42.10%). Linkage disequilibrium analysis showed that the three SNPs had a low linkage ($r^2<0.001$). The T10588C and C10647T were significantly associated with backfat thickness and intramuscular fat content in Qinchuan cattle. Conclusion: Based on our results, we believe that the OLR1 gene could be a strong candidate gene for influencing carcass quality traits in Qinchuan cattle.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권6호
• /
• pp.962-970
• /
• 2007

A total of 1,200 LinNan Chinese color-feathered chicks were used to study the effects of methionine source [DL-2-hydroxy-4-methylthio-butanoic acid (HMTBa) or DL-methionine (DLM)] and dietary crude protein (CP) level on growth performance, carcass traits, and whole-body nitrogen and fat retention. The trial was designed as a $2{\times}2$ factorial arrangement, including two CP levels (adequate and low) and two methionine sources (HMTBa and DL-methionine). Diets were formulated for three phases, starter (0-21 d), grower (21-42 d), and finisher (42-63 d). Chicks fed HMTBa had higher daily gain and improved feed efficiency than DLM during the grower phase (p<0.05). A significant two-way interaction was observed for growth performance during the finisher phase and overall (0-63 d). Growth performance was greater for chicks fed HMTBa than DLM on adequate-CP diets (p<0.05), but this was not observed at low-CP level (p>0.05). Chicks fed low-CP diets grew slower, used feed less efficiently during the grower, finisher phase and overall. On d 42, regardless of dietary CP levels, birds fed HMTBa had higher carcass weights, breast and thigh weights than DLM-fed birds (p<0.04). Birds fed low-CP diet had lighter carcass weights and less breast muscle, thigh muscle, and dressing percentage at the end of starter, grower and finisher phases (p<0.05). Whole body composition analyses found that birds fed HMTBa tended to contain more protein and less fat compared to those chicks fed DLM at the end of the starter phase (p<0.10). Low-CP diets increased CP concentration in the whole body at the end of the finisher phase (p = 0.05). HMTBa supplementation increased whole-body N retention rate during the finisher phase and overall (p<0.01), and low-CP diets reduced N intake and whole-body fat retention during the finisher phase and overall (p<0.05). In summary, HMTBa was better than DLM on an equimolar basis for growth performance, carcass traits, and N retention in Chinese color-feathered chicks. Low-CP diets lowered growth performance as well as carcass traits in color-feathered birds, probably due to imbalanced AA profiles.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권10호
• /
• pp.1504-1510
• /
• 2013

Native chickens hold a significant share of the market in China. In response to the huge demand from the market, the productivity of Chinese native chickens needs to be improved. Cross breeding is an effective method to increase productivity, although it might affect meat quality. In this study, two pure lines (SD02 and SD03) of Erlang mountainous chickens were hybridized with a yellow feather and faster growing line (SD01). The effect of hybridization on carcass and meat quality (physiochemical and textural traits) was measured in the $F_1$ population at d 91 of age. The hybrids exhibited higher body weight and dressed weight, and amount of semi-eviscerated, eviscerated, breast muscle and abdominal fat (p<0.05). Abdominal fat yield also increased (p<0.05) compared to the offspring of the two pure-lines. Meanwhile, there was no significant difference in meat quality traits except for the myofiber diameter and density and the shear force of the breast muscle. Overall, the offspring of cross-lines were similar to pure lines in meat color, pH value, inosinic acid, crude protein, crude fat, dry matter, moisture content and amino acid composition in the breast muscle. These results suggest that productivity can be improved via cross-breeding while maintaining meat quality of the Erlang mountainous chicken.

• Journal of Animal Science and Technology
• /
• 제65권4호
• /
• pp.865-877
• /
• 2023

Thirty Hanwoo cattle including bulls, cows, and steers (n = 10 each) were slaughtered and investigated for carcass traits (weight, meat color, fat color, yield index, maturity, marbling score, back-fat thickness, and firmness) and meat quality. The meat quality such as: pH, color, cooking loss, fatty acid, thiobarbituric acid reactive substance, warner-bratzler shear force, tensile tests, and texture profiles were analyzed on longissimus lumborum (LL) muscles of the carcasses at different aging times (3 d and 21 d). The results showed that steers and cows had higher back-fat thickness and marbling score, and a lower firmness (p < 0.001) than bulls. Bulls exhibited a lower meat quality indicating by higher cooking loss, thiobarbituric acid reactive substance content, warner-bratzler shear force and tensile test values (p < 0.01). Regarding the sensory property, the bull meat also had higher hardness, and lower tenderness, juiciness and flavor scores than the cow or steer meat (p < 0.01). Additionally, the bull meat had a higher polyunsaturated fatty acid and a lower monounsaturated fatty acid contents (p < 0.01). With increased aging time, the meat tenderness was improved in all the genders. Taken together, the present study demonstrated that the gender and aging time affected the carcass traits, fatty acid and sensory quality of beef. Postmortem aging could improve the meat tenderness of all genders especially bulls.

• 한국축산식품학회지
• /
• 제39권2호
• /
• pp.332-344
• /
• 2019

The objective of this study was to investigate slaughtering performance, carcass grade, and quantitative traits of cuts according to seasonal influence by each month in pigs slaughtered in livestock processing complex (LPC) slaughterhouse in Korea, 2017. A total of 267,990 LYD ($Landrace{\times}Yorkshire{\times}Duroc$) pig data were used in this study. Results of slaughter heads, sex distribution, carcass weight, backfat thickness, grading class, total weight, and fat and lean meat percentages of each cut predicted by AutoFom III were obtained each month. The number of slaughtered pigs was the highest in early and late fall but the lowest in midsummer. Only in midsummer that the number of females was higher than that of castrates. During 2017, carcass weight was the lowest in late summer. Backfat thickness was in the range of 21-22 mm. In mid and late spring, pigs showed high 1+ grade ratio (37.05% and 36.15%, respectively). For traits of 11 cuts predicted by AutoFom III, porkbelly showed lower total weight, lean weight, and fat weight in midsummer to early fall but higher lean meat percentage compared to other seasons. Weights of deboned neck, loin, and lean meat were the highest in midfall compared to other seasons (p<0.05). In conclusion, characteristics of slaughtering, grading, and economic traits of pigs seemed to be highly seasonal. They were influenced by seasons. Results of this study could be used as basic data to develop seasonal specified management ways to improve pork production.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권7호
• /
• pp.1057-1068
• /
• 2014

The major goals of the poultry industry are to increase the carcass yield and to reduce carcass fatness, mainly the abdominal fat pad. The increase in poultry meat consumption has guided the selection process toward fast-growing broilers with a reduced feed conversion ratio. Intensive selection has led to great improvements in economic traits such as body weight gain, feed efficiency, and breast yield to meet the demands of consumers, but modern commercial chickens exhibit excessive fat accumulation in the abdomen area. However, dietary composition and feeding strategies may offer practical and efficient solutions for reducing body fat deposition in modern poultry strains. Thus, the regulation of lipid metabolism to reduce the abdominal fat content based on dietary composition and feeding strategy, as well as elucidating their effects on the key enzymes associated with lipid metabolism, could facilitate the production of lean meat and help to understand the fat-lowering effects of diet and different feeding strategies.

• Asian-Australasian Journal of Animal Sciences
• /
• 제3권2호
• /
• pp.97-102
• /
• 1990

A procedure to standardize camel carcass fabrication is proposed. This includes a definitive method of jointing the carcass into wholesale neck, shoulder, brisket, rib, plate, loin, flank, rump and leg cuts. Carcass cutout data were collected from the right sides of 21 Najdi male camels averaging 8, 16 and 26 months of age in order to determine the influence of age on the weight of each wholesale cut. The weight of body, empty body, hot carcass, cold carcass, hump fat, kidney, pelvic and heart fat (KPH) and each wholesale cut increased (p < .01) with age. Except for percent shrinkage and wholesale rump weight, all studied traits increased (p < .01) linearly as the age increased. This change was most pronounced in wholesale flank and plate cuts, increasing by 4.2 and 3.4 times, respectively, while the rump and shoulder cuts changed the least, increasing by 1.8 and 1.9 times, respectively. Allometric growth coefficients indicated that as the camel grew, the weight of rib, brisket, plate and flank cuts increased relatively more rapidly than did cold carcass or empty body weight and that the weight of wholesale shoulder, neck, leg and rump increased less rapidly than did cold carcass or empty body weight.

• Animal Bioscience
• /
• 제36권8호
• /
• pp.1156-1166
• /
• 2023

Objective: Pork belly is a cut of meat with high worldwide demand. However, although the belly is comprised of multiple muscles and fat, unlike the loin muscle, research on their genetic parameters has yet to focus on a representative cut. To use swine breeding, it is necessary to estimate heritability against pork belly traits. Moreover, estimating genetic correlations is needed to identify genetic relationship among the traditional carcass and meat quality traits. This study sought to estimate the heritability of the carcass, belly, and their component traits, as well as the genetic correlations among them, to confirm whether these traits can be improved. Methods: A total of 543 Yorkshire pigs (406 castrated males and 137 females) from 49 sires and 244 dam were used in this study. To estimate genetic parameters, a total of 12 traits such as lean meat production ability, meat quality and pork belly traits were chosen. The heritabilities were estimated by using genome-wide efficient mixed model association software. The statistical model was selected so that farm, carcass weight, sex, and slaughter season were fixed effects. In addition, its genetic parameters were calculated via MTG2 software. Results: The heritability estimates for the 7th belly slice along the whole plate and its components were low to moderate (0.07±0.07 to 0.33±0.07). Moreover, the genetic correlations among the carcass and belly traits were moderate to high (0.28±0.20 to 0.99±0.31). Particularly, the rectus abdominis muscle exhibited a high absolute genetic correlation with the belly and meat quality (0.73±52 to 0.93±0.43). Conclusion: A moderate to high correlation coefficient was obtained based on the genetic parameters. The belly could be genetically improved to contain a larger proportion of muscle regardless of lean meat production ability.

• Asian-Australasian Journal of Animal Sciences
• /
• 제6권2호
• /
• pp.225-234
• /
• 1993

A total of 333 carcasses were evaluated for hindquarter traits: round weight, percent round, loin weight, percent loin, flank weight and percent flank. Other characteristics included: total retail, lean trim, fat trim, round steaks, rump, sirloin tip, loin steaks, percent loin steaks and flank steaks. Mating types included straightbred Angus and Santa Gertrudis, the reciprocal crosses of these two breeds and Gelbvieh ${\times}$ Angus. Breed of sire and breed of dam were significant for most of the traits evaluated. Calf year and slaughter group were also significant. This could be the result of environmental variations. Effect of sire within sire breed was non-significant for all the traits considered. Heterosis due to interaction between sire breed ${\times}$ dam breed was found significant for percent total retail cuts based on hindquarter weight. Generally, Santa Gertrudis purebreds were more desirable in cut out characteristics than all other breeding types followed by crossbreds of Angus ${\times}$ Santa Gertrudis.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권7호
• /
• pp.1057-1067
• /
• 2020

Objective: This study evaluated the effect of pedigree errors (PEs) on the accuracy of estimated breeding value (EBV) and genetic gain for carcass traits in Korean Hanwoo cattle. Methods: The raw data set was based on the pedigree records of Korean Hanwoo cattle. The animals' information was obtained using Hanwoo registration records from Korean animal improvement association database. The record comprised of 46,704 animals, where the number of the sires used was 1,298 and the dams were 38,366 animals. The traits considered were carcass weight (CWT), eye muscle area (EMA), back fat thickness (BFT), and marbling score (MS). Errors were introduced in the pedigree dataset through randomly assigning sires to all progenies. The error rates substituted were 5%, 10%, 20%, 30%, 40%, 50%, 60%, 70%, and 80%, respectively. A simulation was performed to produce a population of 1,650 animals from the pedigree data. A restricted maximum likelihood based animal model was applied to estimate the EBV, accuracy of the EBV, expected genetic gain, variance components, and heritability (h²) estimates for carcass traits. Correlation of the simulated data under PEs was also estimated using Pearson's method. Results: The results showed that the carcass traits per slaughter year were not consistent. The average CWT, EMA, BFT, and MS were 342.60 kg, 78.76 ㎠, 8.63 mm, and 3.31, respectively. When errors were introduced in the pedigree, the accuracy of EBV, genetic gain and h² of carcass traits was reduced in this study. In addition, the correlation of the simulation was slightly affected under PEs. Conclusion: This study reveals the effect of PEs on the accuracy of EBV and genetic parameters for carcass traits, which provides valuable information for further study in Korean Hanwoo cattle.