• Journal of Environmental Science International
• /
• v.21 no.5
• /
• pp.585-596
• /
• 2012

This study is mainly focused on micellar effect of cetyltrimethyl ammonium bromide(CTABr) solution including alkylbenzimidazole(R-BI) on dephosphorylation of isopropyl-4-nitrophenylphosphinate(IPNPIN) in carbonate buffer(pH 10.7). The reactions of IPNPIN with R-$BI^{\ominus}$ are strongly catalyzed by the micelles of CTABr. Dephosphorylation of IPNPIN is accelerated by $BI^{\ominus}$ ion in $10^{-2}$ M carbonate buffer(pH 10.7) of $4{\times}10^{-3}$ M CTABr solution up to 89 times as compared with the reaction in carbonate buffer by no benzimidazole(BI) solution of $4{\times}10^{-3}$ M CTABr. The value of pseudo first order rate constant($k_{\Psi}$) of the reaction in CTABr solution reached a maximum rate constant increasing micelle concentration. Such rate maxima are typical of micellar catalyzed bimolecular reactions. The reaction mediated by R-$BI^{\ominus}$ in micellar solutions are obviously slower than those by $BI^{\ominus}$, and the reaction rate were decreased with increase of lengths of alkyl groups. It seems due to steric effect of alkyl groups of R-$BI^{\ominus}$ in Stern layer of micellar solution. The surfactant reagent, CTABr, strongly catalyzes the reaction of IPNPIN with R-BI and its anion(R-$BI^{\ominus}$) in carbonate buffer(pH 10.7). For example, $4{\times}10^{-3}$ M CTABr in $1{\times}10^{-4}$ M BI solution increase the rate constant($k_{\Psi}=98.5{\times}10^{-3}\;sec^{-1}$) of the dephosphorylation by a factor ca.25, when compared with reaction($k_{\Psi}=3.9{\times}10^{-4}\;sec^{-1}$) in $1{\times}10^{-4}$ M BI solution(without CTABr). And no CTABr solution, in $1{\times}10^{-4}$ M BI solution increase the rate constant($k_{\Psi}=3.9{\times}10^{-4}\;sec^{-1}$) of the dephosphorylation by a factor ca.39, when compared with reaction ($k_{\Psi}=1.0{\times}10^{-5}\;sec^{-1}$) in water solution(without BI). This predicts that the reactivities of R-$BI^{\ominus}$ in the micellar pseudophase are much smaller than that of $BI^{\ominus}$. Due to the hydrophobicity and steric effect of alkyl group substituents, these groups would penetrate into the core of the micelle for stabilization by van der Waals interaction with long alkyl groups of CTABr.

• Journal of Korean Society on Water Environment
• /
• v.26 no.1
• /
• pp.89-95
• /
• 2010

The electrokinetic potential of $CaCO_3$, which takes an important part in aquatic system, has been measured and the variation of total energy between $CaCO_3$ particles with the distance of particles was estimated based on DLVO theory. The electrokinetic potential of particles was observed to increase to positive direction as the charge valence of cations which was added to suspension was increased. Also, the total interaction energy between particles was estimated to be more negative as the charge valence of cation was higher and its concentrations was raised. When a mixture of cations with different charge valences was added, the influence of cation with a higher charge valence was more significant on the total interaction energy between particles. When anion was added to the suspension of $CaCO_3$, the total energy estimated by DLVO theory was examined to move to positive direction and the electrokinetic potential of particles became more negative. Likewise cations, the effect of anions on the electrokinetic potential of particles and total interaction energy between them was observed to be proportional to their charge valence and the influence of the mixture of anions with different charge valence became more remarkable as the mixing ratio of the anion with a higher charge valence was increased.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11b
• /
• pp.159-163
• /
• 1999

Model experiments were conducted to investigate the effect of different fillers on the removal of toner ink. Combinations of different papers (commercial photocopy paper and filler-free paper), fillers (calcium carbonate, kaolin clay, and talc), and chemicals(1-octadecanol, stearic acid, oleic acid, and TOFA) and stearic acid were found to be effective in detachment and agglomeration of toner ink. Furthermore, pH had little effect on toner detachment and agglomeration, indicating both protonated fatty acids and their anions are equally effective. In the presence of either kaolin clay or talc, all these agglomerating agents are equally effective, although a slightly higher dosage(1% for clay and 2% for talc as compared with control) is required, presumably due to the adsorption of chemical by the filler. Calcium carbonate filler, on the other hand, has a significant and adverse effect on the fatty acids used but has little effect on 1-octadecanol with the exception of possible adsorption. While stearic acid is not effective, a much higher level of oleic acid or TOFA is needed when calcium carbonate fillers are present as compared to the filler-free case. Fatty acids react with calcium carbonate to form calcium salts. The availability of fatty acid anion for toner detachment and agglomeration is determined by the solubility of calcium salt of a given fatty acid. Calcium oleate is 10 times more soluble in water than calcium stearate.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.2
• /
• pp.40-46
• /
• 1998

This study was aimed to investigate any improvement of dewatering and energy saving on the papermaking process when the various types of fillers were used, i.e., clay, talc and grounded calcium carbonate (GCC). Cationic polyelectrolyte and alum coagulants neutralized the surface charge of the filler particles and the filler particles were coagulated. The rates of dewatering and drying were investigated. The results indicated that clay tended to intense anion, while talc and GCC tended to anion trend nearly to neutrality. Clay and talc added with EPI-DMA, P-DADMAC and alum respectively as optimum levels showed a significant efficiency on the dewatering and the turbidity dissipation. However, the turbidity and dewatering rate of GCC decreased, when GCC was added with EPI-DMA and P-DADMAC respectively Drying rate of clay was increased when coagulant added. However drying rates of talc and GCC were not affected by coagulant, while the apprarent drying time of talc and GCC in the absence of any coagulant was shorter than the clay in the presence of a coagulant. The result confirmed that talc or GCC was more efficient than clay on the dewatering and drying, which is consistent with a general knowledge in the collodal science.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.2
• /
• pp.149-154
• /
• 2010

The feasibility of lead removal by electrolytic coprecipitation was investigated. Electrolysis bath was divided into anode and cathode chamber with anion exchange resin filled membrane. Sea water was electrolyzed and pH of the electrolyte in cathode chamber was increased. Consequently it induced the formation of $Mg(OH)_2$ and $CaCO_3$. The colloidal type precipitates, hich have high surface area, adsorbed lead ions in sea water and coprecipitated. Sea water electrolyses were conducted at different current density. Concentrations of Mg, Ca and Pb in the solution were measured with titration and ASV method. Morphology and crystallography were analyzed with SEM, EDS and XRD. As pH and current density increased, most of lead ions in the sea water were successfully removed.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.71-76
• /
• 2011

An efficient nucleophilic [$^{18}F$]fluorination has been studied to reduce byproducts and preparation time. Instead of conventional aqueous solution of $K_2CO_3-K_{222}$, several organic solution containing inert organic salts were used to release [$^{18}F$]fluoride ion and anion bases captured in the polymer cartridge, concluding that methanol solution is the best choice. Comparing to azeotropic drying process, one min was sufficient to remove methanol completely, resulting in about 10% radioactivity saving by reducing drying time. The polymer cartridge, Chromafix$^{(R)}$ (PS-$HCO_3$) was pretreated with several anion bases to displace pre-loaded bicarbonate base. Phosphate bases showed better results than carbonate bases in terms of lower basicity. tert-Butanol solvent used as a reaction media played another critical role in nucleophilic [18F]fluorination by suppressing eliminated side product. Consequent [$^{18}F$]fluorination under the present condition afforded fast preparation of reaction solution and high radiochemical yields (98% radio-TLC, 84% RCY) with 94% of precursor remained.

• Journal of the Korean Chemical Society
• /
• v.13 no.2
• /
• pp.131-136
• /
• 1969

The crystal structure of rubidium hydrogen carbonate has been determined by single crystal X-ray diffraction method. the crystals are monoclinic with a = 15.05 $\AA$, b = 5.83 $\AA$, c = 4.02 $\AA$, and $\beta$ = $107^{\circ}.$ There are four chemical units per unit cell and the space-group was fixed as $C2-C^3_2$. Patterson and trial-and-error methods gave the approximate structure and its refinements were made by two-dimentional Fourier summation. The Co3 group is planar with tshhe C-O distances of 1.32 $\AA$, 1.32 $\AA$, and 1.33 $\AA$ within experimental error and the two $CO_3$ groups are linked together to form a complex anion [$H_2C_2O_6$] with the O-H${\cdot}{\cdot}{\cdot}$O distance, 2.53 $\AA.$ Two molecules of $RbHCO_3$ make the dimer structure with two hydrogen bonds. The values of reliability factor for $F_{(hol)}$, $F_{(hko)}$and $F_{(okl)}$are 0.15, 0.15 and 0.17 respectively. Each rubidium ion has eight oxygen neighbours with the Rb-O distances of 2.84~3.11 $\AA.$.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.4
• /
• pp.469-476
• /
• 2008

The synthesis of cyclic carbonate from butyl glycidyl ether (BGE) and carbon dioxide was performed in the presence of three different types of ionic liquid : quarternary ammonium salt, alkyl pyridinium salt, and alkylimidazolium salt. Ionic liquids of different alkyl groups ($C_3$, $C_4$, $C_6$ and $C_8$) and anions ($Cl^-$, $Br^-$ and $I^-$) were used for the reaction which was carried out in a batch autoclave reactor at $60{\sim}120^{\circ}C$. The catalytic activity was increased with increasing alkyl chain length in the order of $C_3$ < $C_4$ < $C_6$. But the ionic liquid with longer alkyl chain length ($C_8$) decreased the conversion of BGE because it is too bulky to form an intermediate with BGE. For the counter anion of the ionic liquid catalysts, the BGE conversion decreased in the order $Cl^-$ > $Br^-$ > $I^-$.

• Journal of Electrochemical Science and Technology
• /
• v.2 no.1
• /
• pp.8-13
• /
• 2011

Interfacial compatibility between the Si-Cu electrode and diluted ionic liquid electrolyte containing 50 vol.% of 1M lithium bis(trifluoromethanesulfonyl)imide (LiTFSI)/1-methyl-1-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide (MPP-TFSI) and 50 vol.% dimethyl carbonate (DMC) in a lithium cell and dilution effect on surface chemistry are examined. ex-situ ATR FTIR analysis results reveal that the surface of the Si-Cu electrode cycled in the diluted ionic liquid electrolyte is effectively passivated with the SEI layer mainly composed of carboxylate salts-containing polymeric compounds produced by the decomposition of DMC. Surface species by the decomposition of TFSI anion and MPP cation are found to be relatively in a very low concentration level. Passivation of electrode surface with the SEI species contributes to protect from further interfacial reactions and to preserve the electrode structure over 200 cycles, delivering discharge capacity of > 1670 $mAhg^{-1}$ and capacity retention of 88% of maximum discharge capacity.

• Journal of the Korean Chemical Society
• /
• v.19 no.4
• /
• pp.225-232
• /
• 1975

The elution behaviour of molybdate and tungstate through anion exchange column has been studied at the various pH. A discussion is made to evaluate the equilibrium constants of the polymerization of these acids comparing with the behaviour of chromate ion and dichromate ion. The eqailibrium constants found at $20^{\circ}$ are $K = 4{\times}10^{53} for 7MoO_4^{2-} + 8H^+ {\longleftrightarrow} Mo7O_{24}^{6- }+ 4H_2O$$ K = 3{\times}10^{54} for 6WO_4^{2-} + 7H^+ {\longleftrightarrow} HW6O_{21}^{5-} + 7H_2O$ referring to this results the conditions of separation of tungstate and molybdate are obtained. iThe quantitative separations of carbonate, molybdate and tungstate from the pregnant solution have been established by anion exchange chromatography, using the $22 cm{\times}44.27 cm^2$ column of Rexyn 201. The optimum eluents for the quantitative separation of those ions are as follows; 0.2M solution of sodium chloride at pH 8 for carbonate, the mixture of 0.5 M ammonium chloride and 0.05 M sodium sulfate at pH 5 for molybdate and 0.5 M solution of ammonium chloride at pH 10 for tungstate. Tungstate is directly recovered from the pregnant solution as a form of ammonium paratungstate, by eluting with ammonium chloride solution.