• Composites Research
• /
• 제17권5호
• /
• pp.68-77
• /
• 2004

레이더 혹은 전자-통신장비에서 방출되는 전자파의 흡수/차폐는 군사적인 목적뿐만 아니라 상업적 목적으로도 매우 중요하다. 효과적인 전자기파 흡수체를 설계하기 위해서는 흡수체에 사용되는 재료의 대상 주파수 대역에서의 전자기적 성질을 정확히 알아야 하며, 손실재의 함량에 따른 정확한 전자기물성 예측이 가능해야 한다 본 연구에서는 전도성 카본 블랙 나노 입자를 함유하는 폴리에스터 복합재료의 유전성질을 자유공간 기법을 이용하여 X-Band 주파수 대역에 걸쳐 측정하고 카본 블랙의 함량에 따라 정량적으로 분석하였으며, 임의의 카본 블랙 함량을 갖는 고분자 수지의 유전 물성을 주파수에 따라 예측할 수 있는 방법을 제시하고 검증하였다.

• Tribology and Lubricants
• /
• 제36권5호
• /
• pp.290-296
• /
• 2020

When two layers of carbon nanotube (CNT) arrays are loaded to mate, the free ends of individual CNTs come into contact at the interface of the two layers. This leads to a higher contact resistance due to a smaller contact region. However, when the free CNT ends of one array penetrate into the mating array, the contact region increases, effectively lowering the contact resistance. To explore the penetration of mating CNTs, we perform molecular dynamic simulations of a simple unit cell model, incorporating four CNTs in the lower array layer coupled with a single moving CNT on the upper layer. The interaction with neighboring CNTs is modelled by long-range carbon bond order potential (LCBOP I). The model structure is optimized by energy minimization through the conjugate gradient method. A NVT ensemble is used for maintain a room temperature during simulation. The time integration is performed through the velocity-Verlet algorithm. A significant vibrational motion of CNTs is captured when penetration is not available, resulting in a specific vibration mode with a high frequency. Due to this vibrational behavior, the random behaviors of CNT motion for predicting the penetration are confirmed under the specific gap distances between CNTs. Thus, the probability of penetration is examined according to the gap distance between CNTs in the lower array and the aspect ratio of CNTs. The penetration is significantly affected by the vibration mode due to the van der Waals forces between CNTs.

• KSBB Journal
• /
• 제28권4호
• /
• pp.225-229
• /
• 2013

Bovine Carbonic anhydrase (BCA) was immobilized on a submicro-porous membrane through covalent immobilization. The immobilization was conducted on the porous membrane surface with the treatment of polyethyleneimine, glutaraldehyde, and the anhydrase, in sequence. The immobilization was confirmed using X-ray photon spectrometer. The pH values of carbon-dioxide saturated solution with buffer were monitored with respect to time to calculate the catalytic activities of hydration of carbon-dioxide for free and immobilized CA. The catalytic rate constant values for free CA, immobilized CA on polystyrene nanoparticles, and immobilized CA on a porous cellulose acetate membrane were 0.79, 0.67, and 0.56 $s^{-1}$, respectively. Reusability was studied up to 10 cycles of $CO_2$ sequestration. The activity for the CA immobilized on the membrane was kept to 95% after 10 cycles, and comparable to the CA on the nanoparticles. The stabilities for heat and storage were also investigated for the three cases. The results suggested that the CA immobilized the membrane had the least loss rate of the activity compared to the others. From this study, the porous membrane was feasible as a carrier for the CA immobilization in hydration and sequestration of carbon-dioxide.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.27-28
• /
• 2019

Recently, a bed company detected a radon more than Red Politics and became a hot topic of conversation. This has led to increased interest in radon, and a number of free-of-charge bodies have also been established to recognize the dangers of radon. In addition, the Korean Institute of Geological and Resource Research is planning to assist the installation of radon alarm systems in 10,000 households nationwide, free of charge. Since radon is a colorless, odorless and tasteless gas that causes lung cancer, it aims to reduce lung cancer incidence by absorbing radon using bamboo activated carbon as a way to reduce it. Due to the use of bamboo activated carbon, radon concentration per hour tends to decrease as substitution rate increases, and table flow tends to decrease as substitution rate increases. Through this experiment, 30% of the replacement rate of bamboo activated carbon is judged to be the most suitable replacement rate.

• Elastomers and Composites
• /
• 제36권2호
• /
• pp.94-101
• /
• 2001

본 연구에서는 RF-plasma를 사용하여 카본블랙을 $N_2$ 분위기에서 표면처리 하였을 때 카본블랙의 표면 산도 및 염기도와 이온 흡착 특성, 그리고 표면 자유에너지를 통한 물리-화학적변화를 관찰하였다. 그 결과 카본블랙을 플라즈마 표면처리 하였을 경우 표면 자유에너지의 비극성 요소 (${\gamma}s^L$)가 크게 증가함을 고찰하였다. 또한 표면 산도 및 표면 염기도와 이온 교환특성, 제타 전위, 그리고 이온 이동도의 향상 등에 의한 표면 관능기의 발달로 표면처리 시간이 증가됨에 따라 극성요소 (${\gamma}s^{sp}$)인 전자 받게 (${\gamma}s^+$)와 전자 주게 (${\gamma}s^-$) 인자도 증가하는 것을 볼 수 있었다.

• Elastomers and Composites
• /
• 제40권1호
• /
• pp.53-58
• /
• 2005

사염화탄소는 C-Cl결합이 끊어진 후에 생성되는 삼염화탄소 라디칼의 공명 안정성에 의해 매우 반응성이 높은 사슬이동제로 알려져 있으며, 본 논문은 벤질 라디칼과 삼염화탄소 라디칼의 안정성을 비교연구하였다. 큐밀클로라이드는 C-Cl결합이 끊어진 후에 벤질 라디칼을 생성하므로 이 연구에 적합한 구조이다. 큐밀클로라이드와 사염화탄소의 반응성은 스티렌을 단량체로 한 자유라디칼 중합을 통해 계산된 사슬 이동 상수로 비교하였다. 실험 결과에 따르면 큐밀클로라이드는 사염화탄소보다 더 반응성이 높았다. 계산된 큐밀클로라이드의 스티렌에 대한 사슬이동상수 값이 약 0.0463으로 0.0011인 사염화탄소 보다 훨씬 높았다. 이 결과는 벤질 라디칼이 삼염화탄소 라디칼보다 훨씬 높은 안정성을 보여주기 때문인 것으로 추정된다. 큐밀클로라이드의 사슬이동상수의 유효성을 조사하기 위하여 Monte Carlo 모의 실험방법을 사용하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.223-226
• /
• 2005

For $CO_2-free$ hydrogen production and better utilization of the produced carbon, catalytic decomposition of methane over rubber-grade carbon blacks manufactured from coal tar was carried out. The catalytic activities of several domestic carbon blacks were compared. A pelletized carbon black exhibited considerably lower activity and activation energy than the fluffy( loose) carbon black of the same grade. This difference is considered due to the binder that was added during pelletization. For pelletized carbon blacks, a tendency was observed that the activity per unit mass of catalyst increased with the specific surface area of the carbon black. Another tendency was also observed that the activation energy increased with the primary particle size or decrease of the specific surface area.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1727-1732
• /
• 2008

We present a facile, yet versatile carbon nanofabrication method using electron beam lithography and resist pyrolysis. Various resist nanopatterns were fabricated using a negative electron beam resist, SAL-601, and were then subjected to heat treatment in an inert atmosphere to obtain carbon nanopatterns. Suspended carbon nanostructures were fabricated by wet-etching of an underlying sacrificial oxide layer. Free-standing carbon nanostructures, which contain 122 nm-wide, 15 nm-thick, and 2 ${\mu}m$-long nanobridges, were fabricated by resist pyrolysis and nanomachining processes. Electron beam exposure dose effects on resist thickness and pattern widening were studied. The thickness of the carbon nanostructures was thinned down by etching with oxygen plasma. An electrical biosensor utilizing carbon nanostructures as a conducting channel was studied. Conductance modulations of the carbon device due to streptavidin-biotin binding and pH variations were observed.

• Advances in nano research
• /
• 제9권3호
• /
• pp.157-172
• /
• 2020

The aim of this present research is the effect of the higher-order terms of the governing equation on the forced longitudinal vibration of a nanorod model and making comparisons of the results with classical nonlocal elasticity theory. For this purpose, the free axial vibration along with forced one under the two various linear and harmonic axial concentrated forces in zigzag Single-Walled Carbon Nanotube (SWCNT) are analyzed dynamically. Three various theories containing the classical theory, which is called Eringen's nonlocal elasticity, along with Rayleigh and Bishop theories (higher-order theories) are established to justify the nonlocal behavior of constitutive relations. The governing equation and the related boundary conditions are derived from Hamilton's principle. The assumed modes method is adopted to solve the equation of motion. For the free axial vibration, the natural frequencies are calculated for the various values of the nonlocal parameter only based on Eringen's theory. The effects of the nonlocal parameter, thickness, length, and ratio of the excitation frequency to the natural frequency over time in dimensional and non-dimensional axial displacements are investigated for the first time.

• Structural Engineering and Mechanics
• /
• 제66권6호
• /
• pp.771-781
• /
• 2018

This study deals with free vibrations analysis with stretching effect of nanocomposite beams reinforced by single-walled carbon nanotubes (SWCNTs) resting on an elastic foundation. Four different carbon nanotubes (CNTs) distributions including uniform and three types of functionally graded distributions of CNTs through the thickness are considered. The rule of mixture is used to describe the effective material properties of the nanocomposite beams. The significant feature of this model is that, in addition to including the shear deformation effect and stretching effect it deals with only 4 unknowns without including a shear correction factor. The governing equations are derived through using Hamilton's principle. Natural frequencies are obtained for nanocomposite beams. The mathematical models provided in this paper are numerically validated by comparison with some available results. New results of free vibration analyses of CNTRC beams based on the present theory with stretching effect is presented and discussed in details. The effects of different parameters of the beam on the vibration responses of CNTRC beam are discussed.