• 한국응용과학기술학회지
• /
• 제21권4호
• /
• pp.289-299
• /
• 2004

Multi-walled carbon nanotubes (CNTs) were prepared by microwave plasma chemical vapor deposition (MPCVD) using various combination of binary catalysts and methane precursor. The maximum yield (10.3 %) of CNTs was obtained using a methane-hydrogen-nitrogen mixture with volume ratio of 1:1:2 at 1000 W of microwave power. As the microwave power increased up to 1000 W, the deposition yield of CNTs raised from 4.1 % to 10. 3 %. However, the prepared CNTs at 800 W showed the more crystalline structure than those prepared at 1000 W. The prepared CNTs over different binary catalysts had various structural conformations such as aligned cylinder, bamboo, and nanofibers. The Id/Ig value of CNTs over$Fe-Fe/Al_2O_3, $Co-Co/Al_2O_3, and $Co-Cu/Al_2O_3 were in the range of 0.89${\sim}$0.93. Among the various binary catalysts used, $Fe-Co./Al_2O_3 showed the highest yield.

• 한국가스학회지
• /
• 제3권1호
• /
• pp.33-40
• /
• 1999

초임계 이산화탄소 및 보조용매를 사용하여 미역분말로부터 지방질의 추출특성을 조사하였다. 지방질의 추출속도는 미역입자가 작을수록, 압력이 높을수록, 온도가 낮을수록, 유량이 많을수록 증가하였으나, 지방질의 추출수율은 주어진 조건에서 거의 일정하였다. 본 연구의 실험범위에서 최적조건은 미역입자 300um, 초임계 이산화탄소의 온도 313K, 압력 13.8MPa 및 유량 30L/min이었고, 이 때 추출수율은 $1.45wt\%$이었다 동일농도의 보조용매를 사용한 경우 에탄을은 메탄올과 헥산보다 더 좋은 추출수율을 나타내었으며, 에탄올을 보조용매로 첨가한 경우는 이산화탄소만을 사용한 경우보다 2.21배의 추출수율의 상승효과가 있었다. 물질전달 매개변수 $k_fa$값은 초임계 이산화탄소만을 사용한 경우에 체류시간 또는 지방질의 평균농도가 감소함에 따라 증가하였으나, 에탄올을 보조용매로 사용한 경우는 반대 결과가 되었다.

• 대한방사성의약품학회지
• /
• 제3권1호
• /
• pp.15-17
• /
• 2017

In carbon-11 labeling, $[^{11}C]$methyltriflate (methyltrifluoromethanesulfonate, MeOTf) is the most widely used through mild reaction condition with high yield. Strong inorganic bases, KOH, NaH and so on, were chosen to activate precursors that have phenolic alcohol as a nucleophilic moiety, because of its poor nucleophilicity. However, these catalyst can also react with radioactive intermediate, $[^{11}C]$MeOTf to afford side products. We will briefly discuss the history of the effort to increase the yield of $[^{11}C]$raclopride and suggest the alternate method for better radiochemical yield and consistency.

• Bulletin of the Korean Chemical Society
• /
• 제19권12호
• /
• pp.1355-1359
• /
• 1998

The treatment of 1,1-bis(phenylthio)-2,2,3,3,3-pentafluoropropylbenzene (1) with 2 equiv. of phenyllithium in THF at -78 ℃ resulted in the formation of isomeric mixture (70: 30) of trifluoromethylated 1,2-diphenylvinyl sulfide 2 in 87% yield. The further oxidation of 2 with m-chloroperbenzoic acid in methylene chloride afforded isomeric mixture (70:30) of trifluoromethylated 1,2-diphenylvinyl sulfone 3 in 87% yield. When 3 was reacted with carbon nucleophiles such as methyllithium, n-butyllithium, phenyllithium and lithium octylide, the corresponding addition-elimination adducts 4, 5, 6 and 7 were obtained in moderate to good yields. The reaction of 3 with 4 equiv. of tributyltin hydride in benzene at reflux temperature provided isomeric mixture (90 : 10) of trifluoromethylated 1,2-diphenylvinyl stannane 8 in 41% yield. The reaction of 8 with methyllithium in the presence of trimethylsilyl chloride gave isomeric mixtures (90: 10) of trifluoromethylated 1,2-diphenylvinyl silane 9 in 88% yield. Finally, the treatment of 8 with Br2 and 12 resulted in the formation of isomeric mixtures (90: 10) of trifluoromethylated 1,2-diphenylvinyl bromide 10 and iodide 11 in 72% and 90% yields, respectively.

• 미생물학회지
• /
• 제37권1호
• /
• pp.92-99
• /
• 2001

Pi1ot plant (200 l)에서의 유가식 배양에 의한 Ralstonia eutopha KHB 8862의 고농도 배 양을 통하여 Poly(3-hydroxybutyrate) (PHB)의 대량생산을 모색하였다. 그 결과 배양 80시간 후 168 g/l의 건체량과 건체량의 74%에 달하는 PHB를 생산할 수 있었으며, 이때의 고과당 시럽으로부터의 PHB 전환수율 및 PHB 생산성은 각각 0.27 (w/w) 및 1.6 $gl^{-1}$ $h^{-1}$ /이었다. 이를 토대로 본 연구에서는 미생물 발효에 의한 PHB 생산 cost 및 그 경제성을 분석하였다. 신규설비투자를 고려하지 않은 경우의 PHB의 생산 cost는 US$2.41/kg으로 산출된 반면에 신규 설비투자를 고려한 경우에는 US$3.15/kg으로 상승되었다. 탄소원의 PHB로의 전환수율과 발효 생산성 모두 PHB 생산비를 결정하는 중요요인이지만 전체 생산비의 37%를 차지하는 탄소원 원료비의 비중이 설비투자의 감가상각비 비중 (17%)에 비해 높기 때문에 생산성을 높이는 노력보다는 전환수율을 개선하는 것이 PHB 생산비용 절감의 핵심이 되는 것으로 나타났다. PHB chip으로의 제조시 PHB 생산 cost는 US$4.0/kg의 수준으로 현재로서는 범용 합성플라스틱에 비하여 경쟁력을 확보하지 못한다. 따라서 생산비 절감을 통한 범용수지로써 경쟁력 제고와 함께 바이오의약 분야 등의 고부가가치 영역에서의 새로운 용도 개발 등이 적극 요구된다.

• Carbon letters
• /
• 제16권4호
• /
• pp.265-269
• /
• 2015

• Carbon letters
• /
• 제25권
• /
• pp.89-94
• /
• 2018

In this study, we tried to prepare an isotropic spinnable pitch which can be useful to prepare the general purpose carbon fiber through the co-carbonization of biomass tar with ethylene bottom oil under two different preparation methods (atmospheric distillation, pressurized distillation). The results showed that the ethylene bottom oil added co-carbonization was very effective to decrease of the oxygen contents for obtaining a stable spinnable pitch. The pressurized distillation was more effective to reduce the oxygen functional groups of pitches than atmospheric distillation. The obtained spinnable pitch by the pressurized distillation showed higher pitch yield of 42% and lower oxygen content of 9.12% than the spinnable pitch by the atmospheric distillation. The carbon fiber derived from the pressurized distillation spinnable pitch by carbonization at $800^{\circ}C$ for 5 min showed that the higher tensile strength of carbon fiber was increased up to 800 MPa.

• 열처리공학회지
• /
• 제28권4호
• /
• pp.171-180
• /
• 2015

The variation in microstructure and texture during continuous annealing was examined in a series of 1.6% Mn-0.1% Cr-0.3% Mo-0.005% B steels with carbon contents in the range of 0.010 to 0.030%. It was found that microstructure of hot band consisted of ferrite and pearlite as a consequence of high coiling temperature, and eutectoid carbon content was between 0.011% and 0.016%. Martensite ranged in volume fraction from 1.5% to 4.0% when annealed at $820{\circ}C$ according to the typical continuous annealing cycle. The critical martensite content for the continuous yielding was about 4% from stress-strain curves. The continuous yielding was obtained in the 0.030% carbon steel and 0.010% to 0.020% carbon steels revealed some yield point elongation ranging from 0.8% to 2.2% in as-annealed conditions. Higher tensile strength in the higher carbon steel is due to both increase in the martensite volume fraction and ferrite grain refinement. Decreasing the carbon content to 0.01% strengthened the intensities of ${\gamma}$-fiber textures, resulting in the increase in the $r_m$ value, which was caused by the lower volume fraction of martensite. The higher carbon steels showed the lower $r_m$ value of about 1.0.

• 대한화학회지
• /
• 제6권1호
• /
• pp.88-93
• /
• 1962

The telomerization of vinyl acetate with carbon tetrachloride, chloroform and monochlorobenzene were investigated with respect to the synthesis of those telomers, properties and molecular weights of the formed telomers, and reaction mechanisms. Vinyl acetate reacted with carbon tetrachloride and chloroform to form telomers at 70-90$^{\circ}C$ and 60-70$^{\circ}C$, respectively and it formed polymer with monochlorobenzene. As a chain transfer agent, carbon tetrachloride was more effective than chloroform. In the telomerization of vinyl acetate and carbon tetrachloride: 1) The average molecular weight of the telomer decreased as the mole ratio of carbon tetrachloride to vinyl acetate increased. The optimum conditions for the highest yield of the telomer were as follows: Mole ratio of carbon tetrachloride to vinyl acetate : 2.5 Reaction time : 20 hours. 2) As the reaction proceeded, the refractive index and average molecular weight of the telomer increased rapidly in the first 10 hours but the increase was slow through the next 10 hours, so that, the average recurring number(n) of taxogen in the final product reached an almost definite value, i.e., 3. The telomer formed in the telomerization of vinyl acetate with carbon tetrachloride and chloroform turned to brown color in the air due to decomposition or polymerization. The suggested telomerization mechanism was supported by the hexachloroethane detected in the course of reaction.

• 한국기후변화학회지
• /
• 제2권4호
• /
• pp.317-331
• /
• 2011

보리 생육모형인 DSSAT의 CERES-Barley를 적용하여, 한반도 A1B 기후변화시나리오에 따른 겉보리의 잠재생산량을 평가하였다. 생육 모의 지역은 30년 평년의 기상자료가 구축되어 있는 56개 지역으로 하였고, 생육 모의 연도는 기준연도(1971~2000년)와 3가지 미래 30년 평년(2011~2040년, 2041~2070년, 2071~2100년)으로 하였다. 그리고 온도효과 분석(온도 변화, $CO_2$ 농도 고정), $CO_2$효과 분석(온도 고정, $CO_2$ 농도 변화), 온난화효과 분석(온도 및 $CO_2$ 농도 변화) 등 3가지 생육모의 환경으로 구분하여 기후변화에 따른 겉보리의 잠재생산성 영향을 평가하였다. CERES-Barly 모형은 국내 겉보리의 발육단계뿐 아니라 수량을 실제 관측값과 아주 유사하게 모의하여($R^2=0.84$), 기후변화에 따른 겉보리의 잠재생산성 변화 예측에 활용하는데 무리가 없다고 판단되었다. 생육 모의 조건별 결과를 나타내면, (1) 온도효과 분석에서, 미래의 온도상승이 상대적으로 낮은 2011~ 2040년 생육 모의 연도의 잠재수량은 기준년도와 비슷한 반면에, 온도상승 정도가 큰 2041~2070, 2071~2100년의 미래 기후조건에서는 잠재수량이 기준년도에 비해 각각 6, 20%씩 감소하였다. 다음으로, (2) $CO_2$ 효과 분석에서, 3가지 미래 기후조건(2011~2040년, 2041~2070년, 2071~2100년)에서 겉보리의 평균 잠재수량이 기준년도에 비해 각각 12, 28, 43%씩 증가하였다. 마지막으로 (3) 온난화효과 분석에서, 미래 생육 모의 연도별(2011~2040년, 2041~2070년, 2071~2100년) 잠재수량은 기준년도에 비해 각각 13, 21, 19%씩 증가하였다.