• 폴리머
• /
• 제28권4호
• /
• pp.285-290
• /
• 2004

전기적-미세역학 시험법을 이용하여 탄소 나노튜브와 탄소 나노섬유로 강화된 에폭시 복합재료의 비파괴 손상 감지능에 대해 고찰하였다. 카본블랙은 탄소 나노튜브 및 탄소 나노섬유와 비교하기 위해 사용하였다. 두 기지 복합재료 시험에서 탄소 섬유의 파단은 전기저항 변화 측정과 함께 음향방출을 이용하여 동시에 감지하였고 탄소나노복합재료 내부에 함침된 탄소 섬유에 대한 응력 감지는 반복 하중 하에서 전기적-pullout 시험법을 이용하여 수행하였다. 같은 부피 함량에서 섬유파단, 기지재료 변형 및 응력에 대한 감지능은 탄소 나노튜브/에폭시 복합재료에서 가장 높았으며, 카본블랙의 경우가 가장 낮았다. 전기적물성 및 손상 감지능은 탄소나노복합재료의 형상학적인 관찰 결과와 상호 비교하였다. 본 연구에서 탄소 나노재료의 균일한 분산은 손상 감지능을 높이기 위한 가장 중요한 요인으로 고려되며, 탄소 나노복합재료에 대한 손상감지는 전기저항측정과 음향 방출을 이용하여 비파괴적으로 평가할 수 있었다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.251.2-251.2
• /
• 2008

• Elastomers and Composites
• /
• 제46권3호
• /
• pp.231-236
• /
• 2011

본 연구에서는 폴리아크릴레이트/카본나노튜브 복합체를 제조하고 전극재료로서의 응용가능성을 알아보았다. 복합체의 전기전도도는 MWNT의 함량에 따라 증가하였고 시트의 두께가 두꺼워 질수록 증가하였으며 MWNT 50 wt% 함량에서 0.36 ${\Omega}$/sq의 표면저항값이 얻어졌다. 복합체의 열분해온도는 폴리아크릴레이트에 비해 MWNT의 함량에 따라 증가하였으며 50 wt%의 MWNT 복합체 함량에서 $15^{\circ}C$의 증가가 관찰되었다. 복합체의 저장탄성율의 경우도 MWNT의 함량에 따라 증가하였고 특히, 고온에서의 증가가 뚜렷하였다. 폴리아크릴레이트의 열팽창거동은 온도의 증가에 따라 $20^{\circ}C$ 부근부터 수축이 된 반면, 복합체의 경우는 수축되지 않고 약간 팽창하는 경향을 보였다. 복합체의 형태학을 관찰한 결과 폴리아크릴레이트 내에서 MWNT의 분산이 잘 이루어 진 것을 알 수 있었다.

• 폴리머
• /
• 제29권1호
• /
• pp.32-35
• /
• 2005

탄소나노튜브를 오존처리한 후 이를 사용하여 탄소나노튜브/고밀도 폴리에틸렌 전도성 복합재료를 제조하였고, 오존처리된 탄산나노튜브가 positive temperature coefficient(PTC) 세기에 미치는 영향을 조사하였다. 원소분석(EA)과 FT-IR 분석 결과, 오존처리된 탄소나노튜브의 표면에는 O-H, C=O 그리고 C-O와 같은 산소함유 관능기가 증가하는 것을 확인할 수 있었다. 또한, 전도성 복합재료의 온도에 따른 저항성은 디지털 멀티메타를 이용하여 측정하였다. 복합재료의 저항성은 고밀도 폴리에틸렌의 결정 용융 온도에서 증가하였으며, 이는 복합재료의 매트릭스로 사용된 고밀도 폴리에틸렌의 열팽창성에 의한 전도성 네트워크의 파괴때문인 것으로 판단된다. 그리고 탄소나노튜브에 오존처리 시간이 증가할수록 탄소나노튜브/고밀도 폴리에틸렌 복합재료의 PTC 세기는 증가했고, 이는 오존처리에 의한 탄소나노튜브 표면에 산소함유 관능기는 PTC 소자의 최대 비저항 값을 증가시키기 때문인 것으로 판단된다.

• 한국분말재료학회지
• /
• 제25권2호
• /
• pp.158-164
• /
• 2018

Multi-walled carbon nanotube (MWCNT)-copper (Cu) composites are successfully fabricated by a combination of a binder-free wet mixing and spark plasma sintering (SPS) process. The SPS is performed under various conditions to investigate optimized processing conditions for minimizing the structural defects of CNTs and densifying the MWCNT-Cu composites. The electrical conductivities of MWCNT-Cu composites are slightly increased for compositions containing up to 1 vol.% CNT and remain above the value for sintered Cu up to 2 vol.% CNT. Uniformly dispersed CNTs in the Cu matrix with clean interfaces between the treated MWCNT and Cu leading to effective electrical transfer from the treated MWCNT to the Cu is believed to be the origin of the improved electrical conductivity of the treated MWCNT-Cu composites. The results indicate the possibility of exploiting CNTs as a contributing reinforcement phase for improving the electrical conductivity and mechanical properties in the Cu matrix composites.

• 한국재료학회지
• /
• 제20권3호
• /
• pp.117-124
• /
• 2010

Titanium dioxide ($TiO_2$) particles deposited on different quantitative Fe-treated carbon nanotube (CNT) composites with high photocatalytic activity of visible light were prepared by a modified sol-gel method using TNB as a titanium source. The composites were characterized by BET, XRD, SEM, TEM and EDX, which showed that the BET surface area was related to the adsorption capacity for each composite. From TEM images, surface and structural characterization of for the CNT surface had been carried out. The XRD results showed that the Fe-ACF/$TiO_2$ composite mostly contained an anatase structure with a Fe-mediated compound. EDX results showed the presence of C, O, and Ti with Fe peaks in the Fe-CNT/$TiO_2$ composites. The photocatalytic activity of the composites was examined by degradation of methylene blue (MB) in aqueous solution under visible light, which was found to depend on the amount of CNT. The highest photocatalytic activity among the different composites was related to the optimal content of CNT in the Fe-CNT/$TiO_2$ composites. In particular, the photocatalytic activity of the Fe-CNT/$TiO_2$ composites under visible light was better than that of the CNT/$TiO_2$ composites due to the introduction of Fe particles.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.15-18
• /
• 2004

Nondestructive damage sensing and mechanical properties for thermal treated carbon nanotube(CNT) and nanofiber(CNF)/epoxy composites were investigated using electro-micromechanical technique. Carbon black (CB) was used only for the comparison. Electro-micromechanical techniques were applied to obtain the fiber damage and stress transferring effect of carbon nanocomposites with their contents. Thermal treatment and temperature affected on apparent modulus and electrical properties on nanocomposites due to enhanced inherent properties of each CNMs. Coefficient of variation (COV) of volumetric electrical resistance can be used to obtain the dispersion degree indirectly for various CNMs. Dispersion and surface modification are very important parameters to obtain improved mechanical and electrical properties of CNMs for multifunctional applications. Further optimized functionalization and dispersion conditions will be investigated for the following work continuously.

• Carbon letters
• /
• 제3권3호
• /
• pp.142-145
• /
• 2002

Multiwall carbon nanotubes (MWNT) were produced using the arc-discharge graphite evaporation technique. Composite films were developed using MWNT dispersed in polystirol polymer. In the present work, various properties of the polymeric thin film containing carbon nanotubes were investigated by optical absorption, electrical resistivity and the same have been discussed.

• Carbon letters
• /
• 제13권3호
• /
• pp.157-160
• /
• 2012

In this work, iron oxide ($Fe_3O_4$) nanoparticles were deposited on multi-walled carbon nanotubes (MWNTs) by a simple chemical coprecipitation method and $Fe_3O_4$-decorated MWNTs (Fe-MWNTs)/polypyrrole (PPy) nanocomposites (Fe-MWNTs/PPy) were prepared by oxidation polymerization. The effect of the PPy on the electrochemical properties of the Fe-MWNTs was investigated. The structures characteristics and surface properties of MWNTs, Fe-MWNTs, and Fe-MWNTs/PPy were characterized by X-ray diffraction and X-ray photoelectron spectroscopy, respectively. The electrochemical performances of MWNTs, Fe-MWNTs, and Fe-MWNTs/PPy were determined by cyclic voltammetry and galvanostatic charge/discharge characteristics in a 1.0 M sodium sulfite electrolyte. The results showed that the Fe-MWNTs/PPy electrode had typical pseudo-capacitive behavior and a specific capacitance significantly greater than that of the Fe-MWNT electrode, indicating an enhanced electrochemical performance of the Fe-MWNTs/PPy due to their high electrical properties.

• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.352-362
• /
• 2012

This paper explores the use of a variety of carbon nanoparticles to impart electrical, thermal conductivity, good frictional properties to silicon nitride matrices. We used the highly promising types of carbon as carbon nanotubes, exfoliated graphene and carbon black nanograins. A high-efficiency attritor mill has also been used for proper dispersion of second phases in the matrix. The sintered silicon nitride composites retained the mechanical robustness of the original systems. Bending strength as high as 700 MPa was maintained and an electrical conductivity of 10 S/m was achieved in the case of 3 wt% multiwall carbon nanotube addition. Electrically conductive silicon nitride ceramics were realized by using carbon nanophases. Examples of these systems, methods of fabrication, electrical percolation, mechanical, thermal and tribological properties are discussed.