• Fashion & Textile Research Journal
• /
• v.13 no.2
• /
• pp.279-284
• /
• 2011

In this study, the process of preparation nonwoven with coated carbon nano fibers (CNFs) /poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) composite solution is described. The various contents of CNFs/PVDF-HFP composite coated nonwoven were prepared and characterized by morphological, mechanical, and electrical methods. Nonwovens are coated with CNFs/PVDF-HFP composite solution and decreased the pick up ratio with increasing CNFs contents in range from 0% to 16%. In the results of SEM images, it was clear that the CNFs were evenly distributed in coated nonwoven by SEM images, the existence of CNFs in coated nonwoven was confirmed regularly. The mechanical properties of various contents of CNFs/PVDF-HFP coated nonwoven were examined. The tensile linearity and compression linearity increased with increasing CNFs contents. The electrical properties of the CNFs/PVDF-HFP coated nonwoven increased with increasing CNFs contents.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1184-1187
• /
• 2003

Electrochemical capacitors are becoming attractive energy storage systems particularly for applications involving high power requirements such as hybrid systems consisting of batteries and electrochemical capacitors for electric vehicle propulsion. A new type electric double layer capacitor (EDLC) was constructed by using carbon nanofibers (CNFs) and DAAQ(1,5-diaminoanthraquinone) electrode. Carbonaceous materials are found in variety forms such as graphite, diamond, carbon fibers etc. While all the carbon nanofibers include impurities such as amorphous carbon, nanoparticles, catalytic metals and incompletely grown carbons. We have eliminated of Ni particles and some carbonaceous particles in nitric acid. Nitric acid treated CNFs could be covered with very thin DAAQ oligomer from the results of CV and TG analyses and SEM images. DAAQ oligomer film exhibited a specific capacity as 45-50 Ah/kg in 4M $H_2SO_4$. We established Process Parameters of the technique for the formation of nano-structured materials. Furthermore, improved the capacitive properties of the nano structured CNFs electrodes using controlled solution chemistry. As a result, CNFs coated by DAAQ composite electrode showed relatively good electrochemical behaviors in acidic electrolyte system with respect to specific capacity and scan rate dependency.

• Advances in concrete construction
• /
• v.3 no.1
• /
• pp.15-37
• /
• 2015

Ongoing efforts for improved fracture toughness of engineered cementitious materials address the inherent brittleness of the binding matrix at several different levels of the material's geometric scale through the addition of various types of reinforcing fibers. Crack control is required for crack widths that cover the entire range of the grain size spectrum of the material, and this dictates the requirement of hybrid mixes combining fibers of different size (nano, micro, macro). Use of Carbon Nano-Tubes (CNT) and Carbon Nano-Fibers (CNFs) as additives is meant to extend the crack-control function down to the nanoscale where cracking is believed to initiate. In this paper the implications of enhanced toughness thus attained at the material nanostructure are explored, with reference to the global smeared constitutive properties of the material, through consistent interpretation of the reported experimental evidence regarding the behavior of engineered cementitious products to direct and indirect tension.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2008.11a
• /
• pp.36.1-36.1
• /
• 2008

• Composites Research
• /
• v.25 no.4
• /
• pp.93-97
• /
• 2012

Carbon nano fibers (CNFs) reinforced magnesium alloy (AZ91) matrix composites have been fabricated by liquid pressing process. In order to improve the dispersibility of CNFs and the wettability with magnesium alloy melt, CNFs were mixed with submicron sized SiC particles ($SiC_p$). Also, the mixture of CNFs and $SiC_p$ were coated with Ni by electroless plating. In liquid pressing process, AZ91 melts have been pressed hydrostatically and infiltrated into three reinforcement preforms of only CNFs, the mixture of CNFs and $SiC_p$ (CNF+$SiC_p$), and Ni coated CNFs and $SiC_p$ ((CNF+$SiC_p$)/Ni). Some CNFs agglomerates were observed in only CNFs reinforced composite. In cases of the composites reinforce with CNF+$SiC_p$ and (CNF+$SiC_p$)/Ni, CNFs were dispersed homogeneously in the matrix, which resulted in the improvement of mechanical properties. The compressive strengths of CNF+$SiC_p$ and (CNF+$SiC_p$)/Ni reinforced composites were 38% and 28% higher than that of only CNFs composite.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1432-1435
• /
• 2006

We report on carbon nano-fibers (CNFs) for applying to epoxy as a highly thermal conductive adhesive. In order to fabricate CNFs, electro-spinning process was performed with polyacrylonitrile (PAN) solutions. The sample was stabilized at the annealing temperature of $360^{\circ}C$, and carbonized from 900 to $1100^{\circ}C$. It is shown that the synthesized CNFs have a good thermal conductivity of several hundred W/m K. LED backlight units (BLUs) fabricated with MPCB using CNF-mixed epoxy give a better heat dissipation and higher performance than normal LED BLUs. On the basis of SEM, XRD, and FTIR, the characteristics of CNFs are described.

• Korean Journal of Materials Research
• /
• v.19 no.10
• /
• pp.544-549
• /
• 2009

Activated carbon (AC) with very large surface area has high capacitance per weight. However, such activation methods tend to suffer from low yields, below 50%, and are low in electrode density and capacitance per volume. Carbon NanoFibers (CNFs) had high surface area polarizability, high electrical conductivity and chemical stability, as well as extremely high mechanical strength and modulus, which make them an important material for electrochemical capacitors. The electrochemical properties of immobilized CNF electrodes were studied for use as in electrical double layer capacitor (EDLC) applications. Immobilized CNFs on Ni foam grown by thermal chemical vapor deposition (CVD) were successfully fabricated. CNFs had a uniform diameter range from 50 to 60 nm. Surface area was 56 m$^2$/g. CNF electrodes were compared with AC and multi wall carbon nanotube (MWNT) electrodes. The electrochemical performance of the various electrodes was examined with aqueous electrolyte of 2M KOH. Equivalent series resistance (ESR) of the CNF electrodes was lower than that of AC and MWNT electrodes. The specific capacitance of 47.5 F/g of the CNF electrodes was achieved with discharge current density of 1 mA/cm$^2$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.55.1-55.1
• /
• 2010

차세대 디스플레이용 전극 재료는 투명하면서도 낮은 저항값을 가져야 하는 투명 전극 재료로 금속, 금속산화물, 전도성 고분자, 탄소재료 등을 들 수 있다. 금속재료는 전도도는 우수하지만, 낮은 투과도로 투명전극 재료로 적절하지 않고, 대표적인 금속산화물 재료인 indium tin oxide (ITO)의 경우, 우수한 투과성과 낮은 면저항을 기반으로 차세대 디스플레이용 전극으로 현재 사용되고 있다. 하지만 ITO 박막은 휘거나 접을 때 기계적 안정성이 취약한 문제점을 나타내고 있다. 이러한 문제점을 극복하기 위해 전도성과 탄성계수가 높고, 저온에서 대면적 공정이 가능한 CNT을 투명 박막 전극 연구가 활발히 진행되고 있다. 하지만 투명전극 제조시, 탄소 나노튜브 간의 van der waals 인력에 의한 응집 현상으로 인한 분산의 불안정성과 분산제 사용으로 인하여 탄소 나노튜브 박막전극의 전기적, 광학적 특성이 저하를 야기한다. 이에 본 실험에서는 아크 방전 공정으로 합성한 SWCNT 분산액을 사용하여 spray coating 방법으로 glass 위에 박막을 형성하였다. SWCNT 투명 박막 전극 위에 DC sputtering을 이용하여 얇은Ni를 도포한 후, $450{\sim}500^{\circ}C$, ethylene gas 분위기의 thermal CVD방법으로 Carbon NanoFibers (CNFs)를 생성시킴과 동시에 분산제를 burning out하였다. CNF 성장 전후의 투명 박막의 전기적 특성은 four point probe를 이용하여 면저항과 UV-vis 장비를 이용하여 가시광선 영역에서의 광학적 투과도를 측정 비교하였다.