• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.355-363
• /
• 2015

Asian lignin was efficiently depolymerized with supercritical ethanol and Ru/C catalyst at various reaction temperature (250, 300, and $350^{\circ}C$). Lignin-oil was subjected to several physicochemical analyses such as GC/MS, GPC, and elemental analysis. With increasing reaction temperature, the yield of lignin-oil decreased from 89.5 wt% to 32.1 wt%. The average molecular weight (Mw) and polydispersity index (Mw/Mn) of lignin-oil obtained from $350^{\circ}C$ (547Da, 1.49) dramatically decreased compare to those of original asian lignin (3698Da, 2.68). This is a clear evidence of lignin depolymerization. GC/MS analysis revealed that the yield of monomeric phenols involving guaiacol, 4-ethyl-phenol, 4-methylguaiacol, syringol, and 4-methysyringol increased with increasing reaction temperature, and these were mostly produced with applying hydrogen gas and Ru/C catalyst (76.1 mg/g of lignin). Meanwhile, the carbon content of lignin-oil increased whereas the oxygen content decreased with increasing reaction temperature, suggesting that hydrodeoxygenation was significantly enhanced at higher temperature.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.5
• /
• pp.577-588
• /
• 1995

The chemical constituents for the seawater and sediment were measured to evaluate pollution in the sea around Pusan Harbor in winter, n992. The average value of trophic state index (TSI) was 19.4 at the outside of Buk Harbor, 50,4 at the inside of Buk Harbor, 56,3 at the Nam Harbor and 5,0 at the Kamchun Harbor. The high correlation found in salinity-nutrients diagram with AOU suggested that the enrichment of nutrients in Pusan Harbor during winter was mainly due to the influx of terrestrial effluents and partially by regenerated nutrients from suspended organic matters in the water column. The mean values of total ignition loss (TIL), COD and total sulfide in the surface sediments were$12.1\%$, 17.5 mg/g.dry wt. and 1.18 mg/g.dry wt. respectively. The highest level of those parameters was shown mostly at the inside of Buk Harbor. The mean concentration of total organic carbon (TOC), total organic nitrogen (TON), and total phosphorus were 24.9 mg/g.dry wt., 1.3mg/g.dry wt. and 0.69 mg/g. dry wt., respectively, Both of the highest level for TOC and total phosphorus have found at the Nam Harbor. On the other hand, the Highest level for TON was found at the inside of Buk Harbor. The TOC/TON atomic ratio with a range of 10.2-60.2 (mean value of 22.5) strongly indicated the active role of the input from the terrestrial organic pollutants.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.5
• /
• pp.548-554
• /
• 2008

The aim of this study was to identify the inhibitory effect of hepatic toxicity and liver lipid metabolism after the administration of Artemisia capillaris and Paecilomyces japonica. SD rats were divided into $CCI_4$ treated group with subgroups of 6% Artemisia capillaries (6A), 4% Artemisia capillaris＋2% Paecilomyces japonica (4A2P), 3% Artemisia capillaris＋3% Paecilomyces japonica (3A3P), 2% Artemisia capillaris＋4% Paecilomyces japonica (2A4P) and 6% Paecilomyces japonica (6P). In this study we also intended to verify the optimum ratio of Artemisia capillaris and Paecilomyces japonica which can reduce hepatotoxicity. Artemisia capillaris and Paecilomyces japonica reduced cholesterol and triglyceride levels which were increased by the treatment of $CCI_4$. HDL-cholesterol level was the most enhanced in the group of 4A2P. On the other hand, athrogenic index (AI) was reduced statistically (p<0.05). When the ratio of Artemisia capillaris and Paecilomyces japonica was 2:1, the improvement of rat serum and liver lipid metabolism and the alleviation of hepatic damage induced by $CCI_4$ were shown to be the most effective in this study. It is considered that the symptoms of severe chemically induced hepatotoxicity could be lessened by Artemisia capillaris and Paecilomyces japonica administration.

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.266-278
• /
• 2012

The objective of this study was developing dynamic stand growth model to predict diameter at breast height (DBH) growth by thinning intensity and cycle for major tree species of South Korea. The yield table, one of static stand growth models, constructed by Korea Forest Service was employed to prepare dynamic stand growth models for 8 tree species. In the process of model development, the thinning type was designated to thinning from below and equations for predicting the DBH change after thinning by different intensities was generated. In addition, stand density (N/ha), age and site index were adopted as explanatory variables for DBH prediction model. Thereafter, using the model, DBH growth under various silvicuture through integrating such equations considering thinning intensities, and cycles. The dynamic stand growth model of DBH developed in this study can provide understanding of effectiveness in forest growth and growing stock when thinning practice is performed in forest. Furthermore, results of this study is also applicable to quantitatively assess the carbon storage sequestration capability.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.20 no.4
• /
• pp.159-168
• /
• 2015

Forty-four surface sediments from Doam Bay were analyzed for total organic carbon (TOC), total nitrogen (TN), total metal (Al, Fe, Mn, Cr, Cu, Ni, Pb, Zn) and further chemical partitioning of metals were carried out in some samples. The TOC (0.32~3.10%) and TN (0.03~0.26%) values of the samples were similar to those of other coastal area. The C/N ratios ranged from 7.9 to 11.9 with an average 9.3 which revealed that contribution of terrestrial organic matters was relatively rare. Contents of analysed metals showed a level lower than threshold effects level (TEL) in sediment quality guidelines. Based on the chemical speciation of metals, the lattice fractions were found in the order Cr > Cu > Ni > Zn > Pb > Mn, while Mn and Pb are the ratio of the non-lattice fractions accounted for more than 50%. The average baseline values were obtained relative cumulative frequency curves and linear regression analysis. The respective baseline concentrations for Cu, Ni, Pb, Zn, Cr and Mn were 11.8, 23.1, 26.8, 76.6, 56.7, 585 mg/kg, respectively. Based on geoaccumulation index ($I_{geo}$) with a baseline values of Mn showed that face the contamination phase from estuarine stations. However, in case of Zn and Pb, although there is no sign of contamination, it could be release from sediment when there is a change in the environment, which is caused from the high ratio of non-lattice fractions.

• Journal of Life Science
• /
• v.19 no.10
• /
• pp.1389-1395
• /
• 2009

Generally, it takes a long time to purify wood vinegar, and it contains toxic compounds such as tar, methanol, phenol and benzopyrene. To reduce the toxicity of wood vinegar itself, we have developed a new purification method of wood vinegar using an oxidation-cohesion reaction and distillation with an active carbon. We have investigated the physico-chemical change (pH, specific gravity, refractive index and dissolved tar), the change of amount of toxic compounds (carbonyl group, phenol, benzopyrene and residual solvents) and organic acids (formic acid (FA), acetic acid (AA), propionic acid (PA)) of the purified wood vinegar under the long term and accelerated storage conditions. Also, we have evaluated the effect of the purified wood vinegar on hair growth using an alopecia model of C57BL/6 mice. As a result, we could find out that the purified wood vinegar was stable and remained without decay under the storage conditions and benzopyrene, a carcinogenic agent, was not detected in the purified wood vinegar. After topical treatment of the purified wood vinegar solution or minoxidil (MXD) for 2 weeks to dorsal skin, the hair regrowth of the mice accelerated faster than that of the control, with no clinical signs. In conclusion, we could suggest a guideline for quality control of process to reduce the toxic compounds in wood vinegar and it might be a useful hair growth promoter in the treatment of baldness or alopecia.

• Korean Journal of Environmental Biology
• /
• v.37 no.2
• /
• pp.136-143
• /
• 2019

This study investigates the effect of denitrified biofloc water on changes in the water quality parameters and the physiological characteristics of shrimps. Biofloc rearing water contains a large number of microorganisms and can rapidly stabilize the water quality and energy saving if reusable due to high water temperatures. Rearing water contain floating bacteria with both aerobic and anaerobic bacteria. Therefore, when the carbon source is added in limited air supply, the anaerobic state is activated and the denitrification process is possible. In this study, the denitrification water had the following properties: ammonia (6.9 mg L^-1), nitrite (0.3 mg L^-1), nitrate concentration (9.2 mg L^-1), high pH (8.42) and alkalinity (590 mg L^-1). The experimental group consisted of seawater (SW, control), a mixture of Seawater and denitrified biofloc water (DNW) in the ratio of 3:1, 1:1 and DNW only. All experiments were done in triplicate. As a result, the survival rate never changed even when 100% of the denitrification water was utilized. However, a body fluid analysis showed that creatine and BUN were increased due to index of stress and the tissue damage resulting from the high denitrified water content. Body fluid ions (Na⁺, K⁺, and Cl^-) significantly decreased as the denitrified water content increased. It was recommended that the denitrification water be mixed with a certain ratio (less than 50%) in the future as it may affect the osmotic pressure control in shrimps.

• Journal of Veterinary Clinics
• /
• v.29 no.4
• /
• pp.297-300
• /
• 2012

In the present study, we investigated and compared the oxidant-antioxidant status of dogs undergoing open and laparoscopic cholecystectomy. Ten male beagle dogs, 4-6 years old, weighing 7-12 kg were used. The animals were randomly assigned to one of two groups according to the type of surgical procedure; open (group 1, n = 5) or laparoscopic cholecystectomy (group 2, n = 5). Heart rate, mean arterial pressure, end-tidal carbon dioxide, peripheral oxygen saturation, and respiratory rates were measured. Plasma total oxidant status (TOS) and total antioxidant status (TAS) levels for the evaluation of oxidative stress were measured. The ratio of the TOS to the TAS gave oxidative stress index (OSI), which is an indicator of the degree of oxidative stress. TOS, OSI and TAS levels were significantly changed after surgery in comparison to levels of before anesthesia. There were no significant different between groups. In the present study, we showed that oxidative stress parameters were found similar in dogs underwent laparoscopic or open cholecystectomy.

• Journal of Environmental Health Sciences
• /
• v.8 no.1
• /
• pp.67-80
• /
• 1982

In order to evaluate the psychosomatic health status of metal manufacturing industries workers and their working environments, the present study was conducted from March 1, 1981 to the end of September 1981. The data was obtained from the samples of metal manufacturing industries in Kyung-In Area and their 1, 162 employees. In addition, the 803 urban residents including students, office clerks, and general publics were sampled as control groups to compare with factory employees in psychosomatic analysis. The basic tool employed in the present study was the Todai Health Index (THI) which modified CMI and was developed by Tokyo University Research Team of Japan. The results of the present study were summarized as follows: 1. Working environments of the factories 1) The data shows that fabrication shop produced the highest noise level ranging from 91 to 96 dB (A) and iron and steel shop had the lowest noise level ranging from 81 to 86 dB (A). 2) Dust concentration was the highest in iron foundry shop ($3.8 mg/m^3$) and the lowest in fabrication shop ($1.2 mg/m^3$). 3) WBGT above threshold limit values (T.L.V.) was noted in steel shop (38$\circ$C) and iron foundry shop (34$\circ$C) 4) The concentration of Sulfur dioxide ($SO_2$)was 30.5ppm at steel shop and 12.0ppm at iron foundry shop. 5) The concentration of carbon monoxide (CO) was 140.0ppm at steel shop and 110.5ppm at iron foundry shop. 6) The atmospheric lead concentration was $0.49 mg/m^3$ at soldering shop. 2. The responses of psychosomatic complaints were much higher in steel shops group than in other manu-facturing group, except the response of aggressiveness. 3. The responses of psychosomatic complaints were much higher in industrial workers than in urban residents, except the responses of depression and aggressiveness (p < 0.01 ). 4. The psychosomatic symptoms which industrial workers and urban residents complained frequently were nervousness. agressiveness and lie scale in order. 5. The responses of psychosomatic complaints by sex were much higher in female group than in male group, except the response of aggressiveness. 6. The responses of psychosomatic complaints by age were that both the female and male group showed an increasing tendency in the all items, except the response of depression as age was increasing. 7. The responses of psychosomatic complaints by the length of services were that both the female and male group showed a tendency of increasing in physical symptoms as work years increased. 8. The responses of psychosomatic complaints were higher in unmarried group in the score of nervousness, aggressiveness, mental irritability and irregular life.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.12
• /
• pp.1273-1280
• /
• 2008

This study sought to establish the optimum operating condition for the recovery of caustic (NaOH) solution from mercerization in textile process. As main factors, the silt density index (SDI) evaluation of ceramic membrane for the application of nanofiltration/reverse osmosis (NF/RO) membrane, the recovery yield measurement of caustic solution for the application of polymeric membrane, the optimum condition of chemical cleaning for the membrane regeneration, the optimum removal condition of total organic carbon (TOC), turbidity, color, and the permeate flux of ceramic membrane/polymeric membrane combined process were investigated. As results, ceramic ultrafiltration (UF) in the first step and nanofiltration (NF) in the second step were found to be suitable for the removal of total suspended solid (TSS), residual organics, turbidity including color, and the recovery of caustic solution from caustic wastewater stream in mercerization process. When only the ceramic UF membrane was used, the rejection efficiency of both of TSS and turbidity was more than 99.0%, and the color and TOC were rejected about 74.7% and 49.2%, respectively. Meanwhile, the combined membrane precess of UF and NF membranes showed even more efficient removal abilities and thus more than 99.9% of TSS and turbidity, 87.7% of color, and 78.2% of TOC were removed. In particular, 91.3% of NaOH was successfully recovered with 83.7% of total volume in the combined membrane process. With this regard, a clean caustic solution was obtained in a high purity, which can be reused for mercerization process, expecting to offer economical benefits.