• 한국강구조학회 논문집
• /
• 제20권6호
• /
• pp.773-781
• /
• 2008

건축물이 초고층화, 장스팬화가 되어갈수록 고강도, 신뢰성이 우수한 강재의 사용요구가 증대되고 있다. 그러나 강재가 고강도화가 되어갈수록 일반강재와는 다른 기계적 특성을 갖게 된다. 본 연구에서는 600MPa급 고강도 강재에 대한 건축구조용 강재로서의 적합성, 용접성 및 기계적 특성을 파악하기 위하여 소재특성 및 용접부 특성을 평가하였다. 화학시험결과, 대상강재는 낮은 탄소당량(${\mathcal{Ceq}}$) 및 용접갈라짐 감수성 조(${\mathcal{Pcm}}$)성을 가진 것으로 나타났으며, 인장시험결과로부터 모든 시험체의 항복강도는 설계기준강도를 만족하는 것과 인장강도가 600MPa이상인 것을 확인하였다. 충격시험결과, 모든 시험체는 KS 규격 값인 47J이상을 나타내었다. 또한 용접부 최고경도시험에서도 상온과 예열시의 경화정도가 큰 차이가 없는 것으로 나타났다. 그러나 용착금속 경우 강재의 성능에 미치지 못하여 고성능 고강도 강재용 용착금속의 개발 및 용접조건을 세밀히 파악할 필요가 있는 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제27권2호
• /
• pp.70-77
• /
• 1999

목질폐잔재중 용이하게 입수할 수 있는 간벌재를 이용하여 그 기초적 제탄 기술을 검토하고, 이 탄화물을 이용하여 토양개량, 탈취, 수분 등의 흡착, 미생물활동 담체, 하천등 수질정화제 등으로 이용하는데 기초자료를 얻을 목적으로 탄화물의 성능을 조사하였다. 간벌재의 공업분석결과 회분 0.22~0.73%, 휘발분 77~80%, 고정탄소 약 10~14% 범위로 나타났다. 간벌재의 탄화 수율은 온도가 높아질수록, 탄화시간이 길수록 낮게 나타났고 수축률은 높게 나타났다. 수율은 낙엽송, 리기다소나무, 소나무가 높았고, 잣나무, 굴참나무가 낮았다. 탄화에 의한 수축률은 목재의 수분에 의한 수축률과 같은 경향을 나타냈다. 탄화후 비중은 각 수종에서 약 50% 감소했다. 탄화물의 공업분석은 회분 0.89~4.08%, 휘발분 6.31~13.79%, 고정탄소 73.9~83.5% 였다. 수소이온농도는 온도가 높아질수록, 탄화시간이 길수록 높게 나타났다. 탄화온도 $400^{\circ}C$의 경우 약 pH 7.5를 나타냈고, $600^{\circ}C$와 $800^{\circ}C$의 경우는 차이가 거의 없이 약 pH 10정도를 나타냈다. 보수성은 본 실험의 탄화온도와 시간의 조건에 따른 영향 없이 비슷한 값을 나타냈다. 초기 24시간 내의 보수성은 시료무게의 약 2.5~3배 정도이고, 그후 평형함수율은 2~10%의 범위를 나타냈다.

• Journal of Preventive Medicine and Public Health
• /
• 제6권1호
• /
• pp.27-41
• /
• 1973

In order to provide some basic data for the control of air and water pollution in Korea, the authors have estimated the amount of air and water pollutants emitted from industries which are employed over 20 employees. This study have done from July 1, 1972 to the end of March 1973. The results are as followings; 1. Total number of establishments with over 20 employees is 5,197 in Korea and the largest group establishments was the manufacturing of textiles with 1,363 establishments (26.2%). 2. By order of number of employees it was observed that there 2,800 industries with 20-59(53.9%) employees, 1,101 with 50-99 (21.2%), 571 with 100-199 (11.0%), 501 with 200-499 (9.6%) and 225 with over 500 (4.3%) respectively. 3. By order of regional distribution, it was observed that there were 2,257 industries in Seoul (43.2%) and 736 industries in Pusan(14.2%). 4. Industrial coal consumption was 596,154 M/T in 1972, but it' 11 be 315,000 M/T in 1980. Fuel consumption was 4,972,000 K1 in 1972, and estimated volume will be 19,370,000 K1 in 1980. 5. Total amounts of air polutants entitled from industries by fuel combustion were sulfur oxides 79,459 tons, carbon monoxide 33,908 tons, particulate 31,304 tons and hydrocarbon 30,280 tons in 1972 but in 1990 there will be sulfur oxides 1,010,474 tons, nitrogen oxides 204,575 tons, carbon monoxide 68,014 tons, particulate 64,820 tons and hydrocarbon 67,622 tons, respectively. 6. Annual emitted air pollutants through the working processes were sulfur oxides 91,250 tons and nitrogen oxides 32,485 tons in 1972, but sulfur oxides 118,625 tons and nitrogen oxides 42,555 tons will be present in 1980, respectively. 7. Annual emitted air pollutants by national unit area amounted to $0.77ton/km^2/year$ in 1965 and $14.7ton/km^2/year$ in 1980. 8. Total industrial wastes from all industries in Korea were estimated at 810,360 tons/day in 1972; manufacturing of chemicals and plastic products showed the highest amount of wastes at 470,000 tons/day. 9. The amounts of water pollutants due to industrial wastes were the B.O.D., 471.5 tons/day, suspended solid 331.5 tons/day, CN, 2.3 tons/day, and Cr. 3.4 tons/day in 1972, but it might be evident of a B.O.D. of 3,388 tons/day, suspended solid 2,544 tons/day, CN 20.1 tons/day, and 26.5 tone/day in 1990. 10. Total population equivalent of B.O.D. was 943,000 in 1972, and the estimated value in 1950 will be 6,780,000.

• 한국약용작물학회지
• /
• 제6권4호
• /
• pp.305-310
• /
• 1998

인삼(人蔘)을 열수추출방법(熱水抽出方法)으로 추출(抽出), 농축(濃縮)하여 엑스를 제조(製造)할때 인삼(人體)에 무해(無害)한 탄산수소(炭酸水素)나트륨, 탄산(崙酸)나트륨 등(等)의 약염기(弱鹽基)를 수삼(水蔘)과 백삼내(白蔘內) 유기산(有機酸) 당량비(當量比)로 첨가한(添加) 결과(結果), 유기산(有機酸) (함량(含量) : citric acid 4.12, 13.05 mg/g, malonic acid 0.68, 2. 18 mg/g, succinic acid 0.13, 0.46 mg/g, malic acid 2.68, 8.62 mg/g)을 중화하여 주된 유효성분(有效成分)인 사포단의 분해(분해) 없이 추출(抽出)할 수 있었으며, 갈색화 반응(反應)을촉진(促進)하여 추출물(抽出物)의 갈색도(褐色度)를 높일 수 있었다. 이와 같은 가수분해(加水分解) 현황(現況)은 $C_{20}$ 위치(位置)의 가수분해(加水分解)가 주(主)된 요인(要因)이었으며, protopanaxadiol과 protopanaxatriol의 $C_3$와 $C_6$에 결합(結合)된 glucoside 결합(結合)은 전자밀도(電子密度) 계산결과(計算結果) 전기음성도(電氣陰性度)가 -0.223으로 낮은 2차(次) 탄소(炭素)에 결합(結合)되어 대채로 안정(安定)하였으나 $C_{20}$ 위치(位置)의 glucosidp 결합(結合)은 전기음성도(電氣陰性度)가 -0.295로 높은 제(第) 3차(次) 탄소(炭素)에 결합(結合)되어 약산용액(弱酸溶液) 가열조건(加熱條件)에서 산가수분해(酸加水凉解)가 용역(容易)하였으며, 사포닌의 3번(番), 6번(番곯)과 20번(番) 탄소(炭素)의 산(酸)과 효소(酵素)에 의한 가수분해(加水分解)와 차이는 전기음성도(電氣陰性度)와 입체장애(立體障碍)에 의한 차이(差異)에 의한 것으로 생각되었다.

• Journal of Animal Science and Technology
• /
• 제62권1호
• /
• pp.64-73
• /
• 2020

Producing animal products from farm to table emits massive amounts of greenhouse gases (GHGs). Modified meal plans, mainly including vegetables and grains, have been recommended to reduce GHG emissions. However, these meal plans have not been developed with regard to the micronutrient content, but rather with regard to the energy requirements of grains and vegetables, which could result in a nutritional imbalance. For this reason, we investigated a common Korean suggested meal plan (SMP) from the National Institute of Agricultural Sciences, in which nutritional conditions were considered, and evaluated its GHG emissions using the Life Cycle Assessment Inventory Database and nutritional values. The SMP, which included meat, was based on the Korean Nutrition Society for adult men age 19 to 29, and was changed to a vegan meal plan (VMP). Animal-based protein sources were substituted for meat alternatives, such as beans and tofu, for which carbon footprint data was available. To compare the nutritional differences, the 9^th Korean Food Composition Tables I and II were consulted. To calculate GHG emissions, the carbon footprint data of the food was converted to a CO₂ equivalent (CO₂e) using a procedure from the Foundation of Agriculture Technology Commercialization and Transfer. It was found that GHG emissions per calorie were 18% lower for the VMP when compared to the SMP. However, if GHG emissions per total amino acids were evaluated, the VMP GHG emissions per total amino acids were 0.12 g CO₂e/mg, while the corresponding value for the SMP was 0.06 g CO₂e/mg. The Korean daily meat intake reported by the Korea Agricultural Statistics Service was 37.1% lower than in the SMP, but when converted to a protein intake the figure was 17.0% lower. It was found that each SMP resulted in more GHG emissions than the VMP, but when considered as GHG emissions per total amino acids, the opposite pattern was apparent. There is a need to conduct more detailed studies of the variation in GHG emissions with different meal plans, using the daily meat intake per person.

• Journal of Nutrition and Health
• /
• 제47권2호
• /
• pp.106-112
• /
• 2014

본 연구의 목적은 사염화탄소에 의해 유도된 간독성에 대하여 AE의 항염증 효과와 예방기전을 연구하는 것이다. 사염화탄소에 의해 간손상이 유도된 Sprague-Dawley 쥐에서 간독성 지표, 항염증 및 항산화 활성을 분석하였다. 우선 사염화탄소에 의해 간손상이 유도된 실험동물에서 Acanthopanax koreanum Nakai의 에탄올 추출물 및 acanthoic acid 섭취로 혈장 ALT 활성이 유의하게 개선됨을 보여주었다. 간조직병리학적 분석에서는 사염화탄소 처리된 대조군에서 거대한 브리징 경화와 심각한 지방변성을 관찰하였는데, 이는 사염화탄소에 의해 유도된 간손상이 성공적이었다는 것을 의미한다. 고용량군인 AE3이 저용량군인 AE1보다 간보호 효과가 더 좋은 것으로 보인다. AE는 단일물질인 AA보다 간독성에 대한 예방요인과 항염증 효과로서 중요한 역할을 하는데 더 우세한다. 이러한 결과들을 바탕으로 사염화탄소에 의해 유도된 간손상에 대한 AE와 AA의 예방 효과가 항염증 성질에 부분적으로 관여하는 것을 제안한다. AE의 생화학학적 효과는 단일물질인 AA보다 우수하며 향후 연구에서 식이변경으로 AE에 대한 추가 연구가 더 필요할 것으로 사료된다.

• 항공우주시스템공학회지
• /
• 제17권6호
• /
• pp.1-8
• /
• 2023

기후변화 대응을 위하여, 항공 분야를 포함한 운송 분야에서 국제온실가스 감축제도 도입 추진 및 대체 에너지 개발 등 환경문제에 대한 연구개발이 활발하다. 그 중 무탄소 에너지원으로 주목받는 암모니아 연료에 대한 관심이 증대되고 있다. 암모니아는 액화 및 운반이 용이하며, 메탄올과 비슷한 에너지 밀도 등의 장점이 있다. 그러나 폭발성 및 독성으로 취급성이 어렵다. 본 연구에서는 암모니아에 비해 취급이 용이한 요소수에 고온의 수분으로 열분해와 가수분해 반응을 유도하여 안정적인 암모니아 발생을 시도하고자 하였다. 암모니아 가수분해 촉진을 위해 고온의 증기를 이용하였고 이론 당량비 미만의 암모니아 발생원인 규명을 하고자 했다. 기체분자운동론에 기인하여 가수분해 촉진을 위한 충분한 충돌빈도가 이루어지지 않았다는 가설을 수립했다. 수분 공급량 변화를 통해 미반응 이소시안산의 가수분해 여부를 실험하였고 암모니아 발생량이 증가함을 확인하였다. 일정 구간동안 암모니아 발생량 증가는 증기 온도, 수분공급유량에 종속됨을 알 수 있었다.

• 한국주조공학회지
• /
• 제10권1호
• /
• pp.31-42
• /
• 1990

The full mould casting process in one of the newly developed techniques which has many advantages. Unbonded sand mould has been prepared for the major mould and $CO^2$ gas mould has been used occasionally for comparison. Patterns were built up with expanded polystyrene and coated with three different materials. Silica, graphite and zircon were used for the coating layer. The effects on fluidity and temperature loss of molten metals were investigated. The molten metals were Al-5% Si alloy, Cu-30% Zn alloy and gray iron of approximately 4.0% of carbon equivalent. Experimental variables were runner section area, superheat, sprue height, coating materials, coating thickness and apparent density of EPS pattern. The effects of coating materials on fluidity and temperature loss of the molten metals during transient pouring are summarized as follows : As runner section area, superheat and sprue height increased, fluidity increased. Temperature loss decreased as runner section area and sprue height increased. However, reversed effects were observed in the case of superheat increment. The coating materials decreased the fluidity of each alloy in the order of silica, graphite and zircon. Zircon brought to the highest temperature loss among the coating materials used. The fluidity increased in the order gray iron, Cu-30% Zn and Al-5% Si alloy while temperature loss in the reverse order. Especially in case of reduced pressure process, the fluidity was increased apparently. Al-5% Si alloy showed the lowest temperature loss among the alloys. The increment of the apparent density of EPS pattern resulted in the fluidity decrease and temperature loss increase. The relation between fluidity and temperature loss of each alloy can be expressed by the following equation within the coating thickness limit of 0.5-1.5㎜. F^*={\frac{a}{T^*-b}}-c$ where, $F^*$ : fluidity in the Full mould, $T^*$ : temperature loss in the mould. a : parameter for full mould. b, c : constants.

• 한국산업융합학회 논문집
• /
• 제7권3호
• /
• pp.259-263
• /
• 2004

In the manufacture progress of LCD or semiconductor, there are used many kinds of gas like erosion gas, dilution gas, toxic gas as a progress which used these gas there are required high puritize to increase accumulation rate of semiconductor or LCD materials work progress of semiconductor or LCD it demand many things like the material which could minimize metallic dust that could be occured by reaction between gas and transfer pipe laying material, illumination of the surface, emition of the gas, metal liquation, welding etc also demand quality geting stricted. Material-Low-sulfur-contend (0.007-0010), vacuum-arc-remelt(VAR), seamless, high-purity tubing material is recommend for enhance welding lower surface defect density All wetted stainless steel surface must be 316LSS elecrto polishinged with ${\leq}0.254{\mu}m$($10.0{\mu}in$) Ra average surface finish, $Cr/Fe{\geq}1.1$ and $Cr_2O_3$ thickness ${\geq}25{\AA}$ From the AES analytical the oxide layer thickness (23.5~36 angstroms silicon dioxide equivalent) and chromum to iron ratios is similar to those generally found on electropolished stainless steel., molybdenum and silicon contaminants ; elements characteristic of stainless steel (iron, nickel and chromium); and oxygen were found on the surface Phosphorus and nitrogen are common contaminants from the electropolish and passivation steps.

• 대한화학회지
• /
• 제13권2호
• /
• pp.157-164
• /
• 1969

Aoolphane was treated with 30% Hydrochloric acid at $18^{\circ}C$ for two hows with stirring in order to obtain the insoluble form of SiO2 gel and to extract quantitatively both $Al_2O_3$as and $Fe_2O_3AlCl_3{\cdot}6H_2O Fe$ and $Cl_3{\cdot}6H_2O$ forms, respectively, at the same time. $SiO_2$ gel was filtered and to the filterate Ammonia was added to precipitate $Al(OH)_3[Fe(OH)_3 Contaminated ]$ The precipitate was separated by filteration and the filterate was recovered as the form of $NH_4Cl$. The precipitate was treated with 200g (NaOH)/l Concentration of NaOH a little excessively to the equivalent at $65~70^{\circ}C$ as $Fe(OH)_3$ formed was insoluble, it was filtered of and to the filterate containing $NaAl(OH)_4(OH_2)_2$Carbon dioxide gas was bubbled at $50^{\circ}C~90^{\circ}C$ to obtain the precipitate with excellent filterability and crystallinity. The product was certified to be Dawsonite $(NaAl(OH)_2CO_3)$ by X-Ray diffraction analysis at below $40^{\circ}C$, when $CO_2$ gas was bubbled into the relatively lower concentration of $NaAl(OH)_4(OH_2)_2$ solution, the precipitate of very fine particles was formed, which was hard to filter and with the Composition of $\alpha-Al_2O_3-H_2O$ (Boehmite).