• Journal of Sensor Science and Technology
• /
• 제25권3호
• /
• pp.173-177
• /
• 2016

Tape casting ceramics technology has been adopted for the fabrication of solid state electrochemical $CO_2$ sensors and the packaging substrates. The fabricated $CO_2$ sensors exhibit a fast response and a good recovery with the almost theoretical sensitivity of 37 mV/decade, corresponding to a sensor operating temperature of 373 K. The two packaging methods, the wire bonding package and the surface- mounted on the ceramic package, were compared with respect to their power consumption and mass production feasibility. In terms of the ease of fabrication, the surface mount packaging technology is superior to the wire bonding technology but its power consumption is approximately twice that of the wired package.

• Journal of Korea Technology Innovation Society
• /
• 제6권4호
• /
• pp.535-550
• /
• 2003

Ever since the United Nations Framework Convention on Climate Change(UNFCCC) was agreed to stabilized greenhouse gas(GHG) concentration in the atmosphere at 1992, most countries including Korea have been developing strategic plans and implementing a number of R＆D programs to develop the measures to reduce the emission of GHG. Therefore, it is necessary to investigate the plans and programs for our country to develop more competitive technologies and to be more active and attentive in international meetings. In this paper, the energy policies of advanced countries will be analysed and be compared each other along with the Korean policy. Furthermore, the carbon dioxide reduction and sequestration R＆D programs in the countries will also be studied.

• Proceedings of the SAREK Conference
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.271-276
• /
• 2008

The oil trap in oil separator is one of the most important characteristics for normal operation of compressor. In this study, oil separation characteristics has been investigated for $CO_2$/PAG mixture using a gravity type of oil separator. The experimental study has been carried out in the range of oil concentration 0 to 5 weight-percent and the mixture temperature range of $0^{\circ}C$ to $15^{\circ}C$. The results obtained indicate that oil separation ratio in oil separator is increased with an increase in the oil concentration and mixture temperature.

• Proceedings of the KAIS Fall Conference
• /
• 한국산학기술학회 2007년도 추계학술발표논문집
• /
• pp.347-349
• /
• 2007

지구 온난화를 일으키는 온실 가스 중의 하나인 이산화탄소($CO_2$)를 Epoxide와 Tetrabutylammonium bromide를 촉매로 하여 합성하여, 초임계 $CO_2$ 상태($Tc=31.06^{\circ}C$, Pc=7.38MPa)에서 반응하여 그에 따른 수율을 측정한 결과 초임계하에서는 현저한 수율의 증가를 확인하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.16-17
• /
• 2019

In order to measure the amount of carbon dioxide emitted from the construction sites, many literature which have been conducted have proposed methodologies for calculating coefficients based on actual data collections for estimating the emission formula. The existing data collected under controlled conditions not on site measurement were too limited to apply in actual sites. The purpose of this study is to conduct analysis based on the data measured in fields and to present predictive models using artificial neural network and nonlinear regression analysis for appropriate predictions and practical applications.

• Korean Chemical Engineering Research
• /
• 제60권1호
• /
• pp.51-61
• /
• 2022

Gas separation via hollow fibre membrane modules (HFMM) is deemed to be a promising technology for natural gas sweetening, particularly for lowering the level of carbon dioxide (CO₂) in natural gas, which can cause various problems during transportation and process operation. Separation performance via HFMM is affected by membrane properties, module specifications and operating conditions. In this study, a mathematical model for HFMM is developed, which can be used to assess the effects of the aforementioned variables on separation performance. Appropriate boundary conditions are imposed to resolve steady-state values of permeate variables and incorporated in the model equations via an iterative numerical procedure. The developed model is proven to be reliable via model validation against experimental data in the literature. Also, the model is capable of capturing axial variations of process variables as well as predicting key performance indicators. It can be extended to simulate a large-scale plant and identify an optimal process design and operating conditions for improved separation efficiency and reduced cost.

• Economic and Environmental Geology
• /
• 제55권3호
• /
• pp.261-271
• /
• 2022

Six gas samples were collected from coal and coaly shale from core AA-1, which was acquired from the Asem-Asem Basin, southeast Kalimantan, Indonesia. These coalbed gas samples were analyzed for the molecular composition, carbon isotope (δ¹³C_CH4, δ¹³C_C2, and δ¹³C_CO2), hydrogen isotope (δD_CH4), hydrocarbon index (C_HC), and carbon dioxide-methane index (CDMI) to document their origin and methanogenic pathways. Core AA-1 successively consists of lower clastic sedimentary rocks (Sedimentary Unit-1, SU-1) containing coal and coaly shale, and upper limestone (Sedimentary Unit-2, SU-2), unconformably underlain by serpentinized basement interpreted as part of the Cretaceous Meratus subduction complex (MSC). The coal and coaly shale (SU-1) were deposited in a marshes nearby a small-scale river. Compositions of coalbed gases show that methane ranges from 87.35 to 95.29% and ethane ranges from 3.65 to 9.97%. Carbon isotope of coalbed methane (δ¹³C_CH4) ranges from -60.3 to -58.8‰, while hydrogen isotope (δD_CH4) ranges from -252.9 to -252.1‰. Carbon isotope of coalbed ethane (δ¹³C_C2) ranges from -32.8 to -31.2‰, carbon isotope of coalbed carbon dioxide (δ¹³C_CO2) ranges from -8.6 to -6.2‰. The coalbed CO₂ is interpreted to be an abiogenic origin based on a combination of δ¹³C_CO2 and CDMI and could have been transported from underlying CO₂ bearing MSC through faults. The methanogenic pathways of coalbed gases are interpreted to have originated from primary methyl-type fermentation and mixed with CO₂ reduction, affecting thermogenic non-marine coal-type gases based on analyses of isotopic ratios and various indexes.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권2호
• /
• pp.801-808
• /
• 2021

The issue of the relationship between environmental degradation and human health has been widely addressed by medical doctors. However, economists have sparsely debated it. The release of carbon dioxide (CO2) into the air can cause several environmental problems and, thus, it can affect human health. Therefore, it is imperative to examine the effect of CO2 emissions on life expectancy in the D-8 countries (Malaysia, Indonesia, Bangladesh, Nigeria, Egypt, Iran, Pakistan, and Turkey) from 1992 to 2017. The panel ARDL method is employed and, then, the PMG estimator is selected. The results show that economic growth, population growth and health expenditure can significantly and positively affect life expectancy, but CO2 emissions can have a significant and negative effect on life expectancy. Since, the major findings reveal that life expectancy can be explained by CO2 emissions. Hence, it is important to formulate policies on reducing CO2 emissions so that life expectancy will not be affected. Energy diversification policies should be formulated or improved in some countries. This is to ensure that the countries are not highly dependent on non-renewable energy that can harm the environment. The government should increase its expenditure on the health sector to save more lives by extend human lifespan.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 한국작물학회 1988년도 정기총회 및 학술연구발표회
• /
• pp.26-27
• /
• 1988

• Proceedings of the Korean Society of Crop Science Conference
• /
• 한국작물학회 2000년도 추계 학술대회지
• /
• pp.103-104
• /
• 2000