• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.6
• /
• pp.454-462
• /
• 2008

Since operating conditions are significantly different for heating and cooling mode operations in a $CO_2$ heat pump system, it is difficult to optimize the performance of the $CO_2$ cycle. In addition, the performance of a $CO_2$ heat pump is very sensitive to outdoor temperature and gascooler pressure. In this study, the cooling and heating performances of a variable speed $CO_2$ heat pump with a twin-rotary compressor were measured and analyzed with the variations of EEV opening and compressor frequency. As a result, the cooling and heating COPs were 2.3 and 3.0, respectively, when the EEV opening was 22%. When the optimal EEV openings for heating and cooling were 28% and 16%, the cooling and heating COPs increased by 3.3% and 3.9%, respectively, over the COPs at the EEV opening of 22%. Beside, the heating performance was more sensitive to EEV opening than the cooling performance. As the compressor speed decreased by 5 Hz, the cooling COP increased by 2%, while the heating COP decreased by 8%.

• Current Photovoltaic Research
• /
• v.7 no.1
• /
• pp.21-27
• /
• 2019

Lifetime of Si photovoltaics modules are about 25 years and a large amount of waste modules are expected to be discharged in the near future. Therefore, the extraction and collection of valuable metals out of discharged Si modules will be one of the important technologies. In this study, we demonstrated that supercritical $CO_2$ extraction method can be effectively used to remove Cu, one of the abundant elements in the module, as well as its oxide form, $Cu_2O$. Especially, we proved that the addition of hexane as co-solvent is effective for the removal of both materials. The optimal ratio of $CO_2$ and hexane was 4:1 at a fixed temperature and pressure of $250^{\circ}C$ and 250 bar, respectively. In addition, it was proven that the removal of $Cu_2O$ was preceded via reduction of $Cu_2O$ to Cu.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.1
• /
• pp.31-38
• /
• 2022

The common algae and industrial waste, chlorella and red mud, were co-pyrolyzed in carbon dioxide condition to fabricate iron-biochar composite. In order to investigate the direct effect of chlorella and red mud in the syngas generation and the property of biochar, experiments were performed using mixture samples of chlorella and red mud. The evolution of flammable gasses (H₂, CH₄, CO) was monitored during pyrolysis. The produced biochar composite was employed as a catalyst for persulfate activation for methylene blue removal. BET analysis indicated that the iron-biochar composite mainly possessed meso- and macropores. The XRD analysis revealed that hematite (Fe₂O₃) contained in red mud was transformed to Fe₃O₄ during co-pyrolysis. The composite effectively activated persulfate and removed methylene blue. Among the composite samples, the composite fabricated from the mixture composed of 1:2 chlorella:red mud showed the best performance in syngas generation and methylene blue removal.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.11
• /
• pp.1839-1843
• /
• 2006

Hydrothermal reactions of $Ln(NO_3)_3{\cdot}5H_2O $ (Ln = Eu (1), Sm (2), Ho (3), Dy (4)) with 3,5-pyridinedicarboxylic acid (3,5-pdcH2) in the presence of 4,4'-bipyridine led to the formation of the 3-D Ln(III)-coordination polymers with a formula unit of $[Ln_2(3,5-pdc)_2(C_2O_4)(H_2O)_4]{\cdot}2H_2O$. These polymers contain a bridging oxalate ligand ($C_2O_4\;^2$). On the basis of GCMS study of the mother liquor remaining after the reaction, we proposed that the $C_2O_4\;^2$ formation proceeds in three steps: (1) Ln(III)-mediated decarboxylation of $3,5-pdcH_2$ to give $CO_2$, (2) the reduction of $CO_2$ to $CO_2\;^{\cdot}$ by the Ln(II) species, and (3) the reductive coupling of the two $CO_2\;^{\cdot}$ radicals to the oxalate ($C_2O_4\;^2$) ion. All polymers were structurally characterized by X-ray diffraction.

• Journal of Environmental Science International
• /
• v.14 no.10
• /
• pp.979-983
• /
• 2005

Indoor air quality has been addressed as an important atmospheric environmental issue and has caught attention of the public in recent years in Korea. Good indoor air quality in classrooms favour student's learning ability, teacher and staff's productivity according to other studies. In this study, each classroom at four different schools was chosen for comparison of indoor and outdoor air quality by means of source generation types such as new constructed classroom, using of cleaning agents and purchased furniture. Temperature, relative humidity (RH), carbon dioxide $(CO_2)$, formaldehyde (HCHO), total volatile organic compounds (TVOCs) and particulate matter with diameter less than $10{\mu}m\;(PM_{10})$ were monitored at indoor and outdoor locations during lesson. HCHO was found to be the worst among parameters measured in new constructed classroom, HCHO and TVOCs was worst in classroom with new purchased furniture, and TVOCs was worst in classroom cleaned by cleaning agents, Indoor $(CO_2)$ concentrations often exceeded 1500 ppm indicating importance of ventilation. Active activity of students during break time made the $PM_{10}$ concentration higher than a lesson, Improvements and further researches should be carried out considering indoor air quality at schools is of special concern since children and students are susceptible to poor air quality.

• Clean Technology
• /
• v.11 no.3
• /
• pp.141-146
• /
• 2005

The composite membranes were made by grafting using supercritical carbon dioxide (scCO2) impregnation and polymerization procedures. The membranes were synthesized by changing amount of monomer. The polypropylene grafted polystyrene sulfonic acid (PP-g-pssa) membranes were characterized with various methods. The morphology and structure of PP-g-pssa membranes were analyzed with scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS). As amount of monomer was increased, ion conductivity, cell performance was increased and methanol permeability was decreased. However PP-g-pssa membranes with 1.5g monomer and over had similar values of methanol permeability, ion conductivity and cell performance.

• KSBB Journal
• /
• v.14 no.4
• /
• pp.490-494
• /
• 1999

This study was carried out to examine some factors affecting the supercritical carbon dioxide extraction of genistein from soybean. The factors investigated in this study were pressure, temperature, flow rate of carbon dioxide, and concentration of modifier. It was foumd out that genistein is not extracted in the absence of modifier. Ethanol was found to be more effective modifier than methanol. 70% of genistein was extracted at 35$^{\circ}C$, 300bar and ethanol 15% (w/v) as compared with the performances of organic solvent extraction.

• Journal of Environmental Policy
• /
• v.10 no.4
• /
• pp.3-37
• /
• 2011

This paper investigates the existence of the environmental Kuznets curve (EKC) for carbon dioxide $CO_2$ emissions and its causal relationships with economic growth and openness by using time series data (1971-2006) from China (an emerging market), Korea (a newly industrialized country), and Japan (a developed country). The sample countries span a whole range of development stages from industrialized to newly industrialized and emerging market economies. The environmental consequences according to openness and economic growth do not show uniform results across the countries. Depending on the national characteristics, the estimated EKC show different temporal patterns. China shows an N-shaped curve while Japan has a U-shaped curve. Such dissimilarities are also found in the relationship between $CO_2$ emissions and openness. In the case of Korea, and Japan it represents an inverted U-shaped curve while China shows a U-shaped curve. We also analyze the dynamic relationships between the variables by adopting a vector auto regression or vector error correction model. These models through the impulse response functions allow for analysis of the causal variable's influence on the dynamic response of emission variables, and it adopts a variance decomposition to explain the magnitude of the forecast error variance determined by the shocks to each of the causal variables over time. Results show evidence of large heterogeneity among the countries and variables impacts.

• Journal of Veterinary Clinics
• /
• v.28 no.1
• /
• pp.40-45
• /
• 2011

Cardiovascular changes caused by $CO_2$ pneumoperitoneum during laparoscopic ovariohysterectomy (LOVH) were measured in nine healthy mixed breed dogs ($16.7{\pm}4.6kg$). The dogs were premedicated with the combination of atropine, acepromazine, and butorphanol. General anesthesia was induced with propofol and maintained with isoflurane in oxygen. Controlled ventilation maintained partial pressure of end-tidal $CO_2$ between 35-45 mmHg. The $CO_2$ pneumoperitoneum was maintained at a constant pressure of 12 mmHg and the dog was placed in the $15^{\circ}$ Trendelenburg position as LOVH was performed. Dorsal pedal artery was catheterized for measurements of heart rate (HR) and invasive arterial blood pressure (IBP). Prior to the intraperitoneal insufflation, baseline measurements of HR and IBP were made every minute for a total of 10 min. Then, measurements of HR and IBP were made every 5 min following intraperitoneal insufflation and were also made every 5 min following desufflation for a total of 10 min. The $CO_2$ pneumoperitoneum during LOVH resulted in a significant (P < 0.05) increase in systolic arterial blood pressure at the time of the onset of insufflation. In addition, diastolic and mean arterial blood pressure increased significantly (P < 0.05) at the time of the onset of insufflation and 5 min following insufflation. The mean heart rate did not change significantly during LOVH. Although IBP showed sharp initial rise following the $CO_2$ pneumoperitoneum, the changes were within physiological acceptable limits in these healthy, ventilated dogs.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.947-954
• /
• 1997

Selected physical properties of cornmeal extrudates fortified with dairy products and extrusion process by $CO_2$ gas injection were analysed. Dairy products including whole milk powder, whey protein concentrate non-fat dry milk, and sodium caseinate were tested at the addition of 10% and 20%, based on cornmeal weight. $CO_2$ gas was injected to the barrel at the pressure of 0.7 and 1.4 MPa. Specific mechanical energy (SME) input was decreased by the addition of dairy products. Sodium caseinate had a little effect on decreasing the SME input, however whole milk powder tremendously reduced SME input when the concentration increased. An increase in milk product content resulted in increasing the piece density at the injection pressure of 0.7 MPa. At both 10% and 20% milk product content, the piece density was lowest at the injection pressure of 0.7 MPa. The sectional expansion index was highest at the injection pressure of 0.7 MPa. However, the specific length was constantly increased with the increase in $CO_2$ injection pressure. Water absorption index was decreased and water solubility index was increased by the addition of milk products. The injection pressure of $CO_2$ was optimum at 0.7 MPa. The addition of whole milk powder limited to puff the melt, but the other milk products tested resulted in puffing with $CO_2$ injection to 1.4 MPa.