• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.355-356
• /
• 2006

This work describes the effect of the number of roll pressing and the composition of carbon black on the electric and mechanical properties of carbon-PTFE electrode, in which composition is MSP20 : carbon black: PTFE = 95-X : X : 5 wt.%. It was found that the best electric and mechanical properties were obtained for sheet electrode roll pressed about 15 times and for sheet electrode, in which composition is MSP20 carbon black : PTFE = 80 : 15 : 5 wt%. These behaviors could be explained by the network structure of PTFE fibrils and conducting paths linked with carbon blacks, respectively. On the other hand, cell capacitor using the sheet electrode with 15 wt.% of carbon black attached on aluminum current collector with the electric conductive adhesive, in composition is carbon black : CMC = 70 : 30 wt.%, has exhibited the best rate capability between 0.5 $mA/cm^2$ ~ 100 $mA/cm^2$ current density and the lowest ESR.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.541-542
• /
• 2006

This work describes the effect of the number of roll pressing and the composition of carbon black on the electric and mechanical properties of carbon-PTFE electrode, in which composition is MSP 20 : carbon black : PTFE = 95-X : X : 5 wt.%. It was found that the best electric and mechanical properties were obtained for sheet electrode roll pressed about 15 times and for sheet electrode, in which composition is MSP 20 : carbon black : PTFE = 80 : 15 : 5 wt.%. These behaviors could be explained by the network structure of PTFE fibrils and conducting paths linked with carbon blacks, respectively. On the other hand, cell capacitor using the sheet electrode with 15 wt.% of carbon black attached on aluminum current collector with the electric conductive adhesive, in composition is carbon black : CMC = 70 : 30 wt.%, has exhibited the best rate capability between $0.5mA/cm^2{\sim}100mA/cm^2$ current density and the lowest ESR.

• 한국기계가공학회지
• /
• 제19권10호
• /
• pp.59-67
• /
• 2020

Polycarbonate thermoplastic composite materials are anisotropic and exhibit physical properties in the longitudinal direction. Therefore, the physical properties depend on the type and direction of reinforcements. The thermal conductivity, electrical conductivity, and resin impregnation can be controlled by adding carbon nanotubes to polycarbonate resin. However, the carbon fiber used as a reinforcing material is expensive, interfacial adhesion issues occur, and simulation values are different from actual values, making it difficult to perform mathematical analysis. However, carbon nanotubes have advantages such as light weight, rigidity, impact resistance, and reduced number of parts compared to metals. Due to these advantages, it has been applied to various products to reduce weight, improve corrosion resistance, and increase impact durability. As the content of carbon nanotubes or carbon fibers increases, the mechanical properties and antistatic and electromagnetic shielding performance improve. It is expected that the amount of carbon nanotubes or carbon fibers can be optimized and applied to various industrial products.

• 무역학회지
• /
• 제44권1호
• /
• pp.45-56
• /
• 2019

The purpose of this study is to investigate the relationship between foreign investment and carbon emissions in the Korean electricity sector, the causal relationship between the foreign investment invested in the electric power sector in the 16 regional regions and the carbon emissions in the region, The purpose of this study is to analyze the effects of foreign investment on these sectors and the carbon footprint of these sectors using Panel Random Effect Analysis, Panel VAR and OLS models. A panel analysis of foreign investment and regional carbon emissions showed that there was a causal relationship. Based on this analysis, OLS analysis showed that 7 out of 16 metropolitan areas were foreign investment And carbon emissions were significant. In the remaining six regions except Gwangju, there was a causal relationship between foreign investment in the local power sector and the reduction of carbon emissions. After categorizing the electric power industry by device, process, purpose and number of employees, causality also appeared in relation to foreign investment in these sectors and their carbon emissions. Through this study, the authors suggest that foreign investment can be a way to solve not only the financial burden of carbon emission problem, but also the development of national economy and industry through the inflow of capital and advanced new technology.

• 한국콘텐츠학회논문지
• /
• 제16권12호
• /
• pp.373-382
• /
• 2016

이산화탄소 포집 및 저장 / 격리 (CCS) 기술은 많은 이산화탄소 저감 방법 중 이상적인 방법으로 주목 받고 있다. 이산화탄소를 포집해서 파이프라인을 통해 저장소까지 수송할 때, 저장소가 가까운 경우 직접 수송할 수도 있지만, 중간 저장의 역할을 하는 허브를 거쳐 수송할 수도 있다. 허브의 수와 위치를 결정하는 것은 중요한 문제이다. 다목적 의사 결정을 위한 수학 모델은 많은 제약식과 목적식을 수반하는데, 문제의 계산 복잡도가 증가하지만 항상 최적을 보장하지 않는다. 본 연구에서는, 이산화탄소 수송망에서 중간 저장 허브의 위치와 수를 결정하는 알고리즘을 제안하고, 이를 활용하여 이산화탄소 발생지의 연결 네트워크 시뮬레이터를 개발한다. 시뮬레이터에서는 또한 이산화탄소의 수송 경로를 제공한다. 사례 연구로 한국에 모델을 적용한다.

• Composites Research
• /
• 제33권4호
• /
• pp.198-204
• /
• 2020

본 연구에서는 탄소나노튜브 다발을 포함하는 나노복합재료의 열-기계적 특성을 정량적으로 예측하기 위하여 분자동역학 전산모사와 유한요소 기반 균질화 기법을 적용하였다. 응집된 탄소나노튜브의 수가 증가함에 따라 동일한 탄소나노튜브의 체적분율에도 불구하고, 면내 영률 및 면내 전단계수는 감소하였고, 면내 열팽창계수는 증가함을 확인할 수 있었다. 계면의 두께를 조사하기 위하여 밀도의 반경 방향 분포(Radial density distribution)을 조사하였으며, 계면의 두께는 탄소나노튜브의 수와는 거의 무관함을 확인할 수 있었다. 기지와 계면은 등방성 재료로 가정하였으며, 예측한 계면의 열-기계적 특성에 따르면, 응집된 탄소나노튜브의 수가 증가함에 따라 계면의 영률 및 전단계수는 감소하였으며, 열팽창계수는 반대로 증가하였다. 이를 토대로, 탄소나노튜브 다발을 포함하는 PLA 나노복합재료의 열-기계적 특성 예측을 위한 멀티스케일 균질화 모델을 개발하였다.

• 무역상무연구
• /
• 제58권
• /
• pp.329-351
• /
• 2013

Since the Kyoto Protocol was released in 2005, there has been a number of mechanisms about funding and how to allocate the burdens. The UNFCCC(United Nations Framework Convention on Climate Change)have discussed establishing an international fund to support the reduction of a greenhouse gas. As the availability of adaption finance for developing countries increase, it's needed for a way of prioritizing countries. This article analyzes the carbon reduction system that includes a emission trading scheme, a carbon tax and examines GCF(Green Climate Fund)'s role and needs. A solution to finance Green Climate Fund is more preferred a harmonized carbon tax that across all nations with carbon tax. Especially the role of industrialized countries is important that based on their historical responsibility for fossil fuel emission. That is, they should get more shares of the global costs than developing countries.

• Journal of Forest and Environmental Science
• /
• 제34권2호
• /
• pp.162-164
• /
• 2018

This study quantified the carbon storage and uptake by street trees in Seoul and explored suitable planting and management strategies. A systematic sampling model was used to select 50 plots to survey the structures of street trees. The average density and cover of street trees were approximately 5.8 trees/$100m^2$ and 12.1%, respectively. Trees with a dbh of less than 30 cm accounted for about 66.3% of the total number of trees surveyed. The total carbon storage and uptake by the street trees were approximately 103,641 t and 10,992 t/yr, respectively. The total carbon uptake equaled the amount of annual carbon emissions from driving of about 11,000 cars. Street tree planting and management strategies were proposed to enhance carbon uptake. They included multi-layered and multi-aged planting, securing ground and space for plant growth, and avoiding excessive tree pruning.

• Carbon letters
• /
• 제12권4호
• /
• pp.252-255
• /
• 2011

Carbon-based electric double-layer capacitors are being evaluated as potential energy-storage devices in an expanding number of applications. In this study, samples of carbon black (CB) treated at different temperatures ranging from $650^{\circ}C$ to $1100^{\circ}C$ were used as electrodes to improve the efficiency of a capacitor. The surface properties of the heat-treated CB samples were characterized by X-ray photoelectron spectroscopy and X-ray diffraction. The effect of the heat-treatment temperature on the electrochemical behaviors was investigated by cyclic voltammetry and in galvanostatic charge-discharge experiments. The experimental results showed that the crystallinity of the CBs increased as the heat-treatment temperature increased. In addition, the specific capacitance of the CBs was found to increase with the increase in the heat-treatment temperature. The maximum specific capacitance was 165 $F{\cdot}g-1$ for the CB sample treated at $1000^{\circ}C$.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.913-916
• /
• 1999

Recent developments of carbon nanotubes are reviewed［1,2,3,4］. We use Tersoff carbon potential for bonded interactions［5］ and Lennard-Jones 12-6 potential for non bonding interactions［6］to describe mechanical properties of the temperature-dependent armchair single wall carbon nanotube. At first we report that through defect number and bonding energy calculation, how single wall carbon nanutube is capped in the constant temperature. (300K, 2000K, 3000K, 4000K) At second, we perform MD simulation, which are performed on the energy optimized structure of carbon nanotube.