• Steel and Composite Structures
• /
• 제32권6호
• /
• pp.753-767
• /
• 2019

Vibration control in mechanical equipments is an important problem where unwanted vibrations are vanish or at least diminished. In this paper, free vibration active control of the porous sandwich piezoelectric polymeric nanocomposite microbeam with microsensor and microactuater layers are investigated. The aim of this research is to reduce amplitude of vibration in micro beam based on linear quadratic regulator (LQR). Modified couple stress theory (MCST) according to sinusoidal shear deformation theory is presented. The porous sandwich microbeam is rested on elastic foundation. The core and face sheet are made of porous and three-phase carbon nanotubes/resin/fiber nanocomposite materials. The equations of motion are extracted by Hamilton's principle and then Navier's type solution are employed for solving them. The governing equations of motion are written in space state form and linear quadratic regulator (LQR) is used for active control approach. The various parameters are conducted to investigate on the frequency response function (FRF) of the sandwich microbeam for vibration active control. The results indicate that the higher length scale to the thickness, the face sheet thickness to total thickness and the considering microsensor and microactutor significantly affect LQR and uncontrolled FRF. Also, the porosity coefficient increasing, Skempton coefficient and Winkler spring constant shift the frequency response to higher frequencies. The obtained results can be useful for micro-electro-mechanical (MEMS) and nano-electro-mechanical (NEMS) systems.

• Computers and Concrete
• /
• 제25권3호
• /
• pp.215-224
• /
• 2020

In the present study, according to the important of porosity in low specific weight in comparison of high stiffness of carbon nanotubes reinforced composite, buckling and free vibration analysis of sandwich composite beam in two configurations, of laminates using differential quadrature method (DQM) is studied. Also, the effects of porosity coefficient and three types of porosity distribution on critical buckling load and natural frequency are discussed. It is shown the buckling loads and natural frequencies of laminate 1 are significantly larger than the results of laminate 2. When configuration 2 (the core is made of FRC) and laminate 1 ([0/90/0/45/90]_s) are used, the first natural frequency rises noticeably. It is also demonstrated that the influence of the core height in the case of lower carbon volume fractions is negligible. Even though, when volume fraction of fiber increases, the critical buckling load enhances smoothly. It should be noticed the amount of decline has inverse relationship with the beam aspect ratio. Investigating three porosity patterns, beam with the distribution of porosity Type 2 has the maximum critical buckling load and first natural frequency. Among three elastic foundations (constant, linear and parabolic), buckling load and natural frequency in linear variation has the least amount. For all kind of elastic foundations, when the porosity coefficient increases, critical buckling load and natural frequency decline significantly.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.28-32
• /
• 2010

Technical demands for aspheric glass lens formed in market increases its application from simple camera lens module to fiber optics connection module in optical engineering. WC is often used as a metal core of the aspheric glass lens, but the long life time is issued because it fabricated in high temperature and high pressure environment. High hard thin film coating of lens core increases the core life time critically. Diamond Like Carbon(DLC) thin film coating shows very high hardness and low surface roughness, i.e. low friction between a glass lens and a metal core, and thus draw interests from an optical manufacturing industry. In addition, DLC thin film coating can removed by etching process and deposit the film again, which makes the core renewable. In this study, DLC films were deposited on the SiC ceramic core. The process variable in FVA(Filtered Vacuum Arc) method was the substrate bias-voltage. Deposited thin film was evaluated by raman spectroscopy, AFM and nano indenter and measured its crystal structure, surface roughness, and hardness. After applying optimum thin film condition, the life time and crystal structure transition of DLC thin film was monitored.

• 한국재료학회지
• /
• 제25권10호
• /
• pp.531-536
• /
• 2015

GNPs have several excellent mechanical properties including high strength, a good young's modulus, thermal conductivity, corrosion resistance, electronic shielding, etc. In this study, CF/GNP/Epoxy composites were manufactured using GNP weight ratios of 0.15 wt%, 0.3 wt%, 0.5 wt%, 0.7 wt% and 1 wt%. The composites were manufactured with a mechanical method (3-roll-mill). Tensile, impact and wear tests were performed according to ASTM standards D3039, D256 and D3181, respectively. The results show that the CF/GNP0.3wt%/Epoxy composites have good mechanical properties, e.g., tensile strength and impact and wear resistance. In this study, both carbon fabric and GNPs were used as reinforcements in the composites. The mechanical properties increased and weight loss decreased as the GNP content in the resin films was increased.

• Carbon letters
• /
• 제18권
• /
• pp.30-36
• /
• 2016

Well-dispersed Ag₃VO₄ nanoparticles @polyacrylonitrile (PAN) nanofibers were synthesized by an easily controlled, template-free method as a photo-catalyst for the degradation of methylene blue. Their structural, optical, and photocatalytic properties have been studied by X-ray diffraction, transmission electron microscopy, field-emission scanning electron microscopy equipped with rapid energy dispersive analysis of X-ray, photoluminescence, and ultraviolet-visible spectroscopy. The characterization procedures revealed that the obtained material is PAN nanofibers decorated by Ag₃VO₄ nanoparticles. Photocatalytic degradation of methylene blue investigated in an aqueous solution under irradiation showed 99% degradation of the dye within 75 min. Finally, the antibacterial performance of Ag₃VO₄ nanoparticles @PAN composite nanofibers was experimentally verified by the destruction of Escherichia coli. These results suggest that the developed inexpensive and functional nanomaterials can serve as a non-precious catalyst for environmental applications.

• 한국수소및신에너지학회논문집
• /
• 제32권1호
• /
• pp.86-91
• /
• 2021

In order to save the energy in vehicles using renewable energy, it is necessary to reduce the weight of parts with polymer matrix composites. Carbon nanotube (CNT) is the nano-scale reinforcement used to increase the interlaminar strength of fiber reinforced composites or enhance the fracture toughness of polymer. However, since the degree of improvement in mechanical properties varies according to the various experimental conditions such as shape of reinforcement, types of matrix and dispersion of reinforcement, research to find the optimal conditions is essentially needed. In this study, CNT/epoxy composites with different CNT concentration were fabricated under the same conditions, and the optimal CNT content (2 wt%) was found through Mode 1 fracture toughness test. Furthermore, through optical microscopy, it was confirmed that the fracture toughness was rather decreased due to the CNT aggregation when the CNT content exceeded 2 wt%.

• Advances in nano research
• /
• 제14권3호
• /
• pp.261-271
• /
• 2023

The present study follows three main goals. First, an analytical solution with high accuracy is developed to assess the effects of embedding pre-strained shape memory alloy (SMA) wires on the critical buckling temperatures of rectangular sandwich plates made of soft core and graphite fiber/epoxy (GF/EP) face sheets based on piecewise low-order shear deformation theory (PLSDT) using Brinson's model. As the second goal, this study compares the effects of SMAs on the thermal buckling of sandwich plates with those of carbon nanotubes (CNTs). The glass transition temperature is considered as a limiting factor. For each material, the effective ranges of operating temperature and thickness ratio are determined for real situations. The results indicate that depending on the geometric parameters and thermal conditions, one of the SMAs and CNTs may outperform the other. The third purpose is to study the thermal buckling of sandwich plates with advanced hybrid SMA/CNT/GF/EP composite face sheets. It is shown that in some circumstances, the co-incorporation of SMAs and CNTs leads to an astonishing enhancement in the critical buckling temperatures of sandwich plates.

• 한국고분자학회지:고분자과학과기술
• /
• 제21권2호
• /
• pp.149-156
• /
• 2010

전기방사 탄소섬유와 s-VGCFs는 그 미세구조의 특성 때문에 응용분야가 서로 다르다. 전기방사 탄소나노섬유는 유기물을 섬유화하고 그것을 탄화하기 때문에 VGCFs에 비해서 낮은 가격에 대량생산이 가능하고 촉매를 사용하지 않기 때문에 전극으로 사용할 경우 금속불순물에 대한 부반응의 우려가 없다. 한편, 결정성이 낮고 세공이 잘 발달되어 비표면적이 크기 때문에 이온을 흡착해서 에너지를 저장하는 전기화학 캐패시터나 가스 흡착 분리나 촉매의 지지체로 사용하는데 장점이 있다. 이에 비해서 s-VFCFs는 섬유의 직경이 기존의 VGCF에 비해서 작으면서 잘 발달된 흑연구조가 동심원 구조를 하고 있어 굴곡강도가 크고 열 및 전기전도도가 우수하여 납축전지나 Li 이온전지의 충전제로 사용하여 역학적 특성과 향상시켜 주는 역할을 한다. 또한, 금속과 복합화하여 가벼우면서도 강도를 증가시켜주는 보강재로 사용가능하다.

• Computers and Concrete
• /
• 제18권5호
• /
• pp.1053-1063
• /
• 2016

As concrete is most usable material in construction industry it's been required to improve its quality. Nowadays, nanotechnology offers the possibility of great advances in construction. For the first time, the nonlinear buckling of straight concrete columns armed with single-walled carbon nanotubes (SWCNTs) resting on foundation is investigated in the present study. The column is modelled with Euler-Bernoulli beam theory. The characteristics of the equivalent composite being determined using the Mori-Tanaka model. The foundation around the column is simulated with spring and shear layer. Employing nonlinear strains-displacements, energy methods and Hamilton's principal, the governing equations are derived. Differential quadrature method (DQM) is used in order to obtain the buckling load of structure. The influences of volume percent of SWCNTs, geometrical parameters, elastic foundation and boundary conditions on the buckling of column are investigated. Numerical results indicate that reinforcing the concrete column with SWCNTs, the structure becomes stiffer and the buckling load increases with respect to concrete column armed with steel.

• 공업화학
• /
• 제23권3호
• /
• pp.313-319
• /
• 2012

본 연구에서는 Polyacrylonitrile (PAN)계 탄소섬유 표면에 구리도금 표면처리가 탄소섬유 강화 복합재료의 기계적 계면 특성에 미치는 영향에 관하여 관찰하였다. 탄소섬유 표면특성은 주사전자현미경, X-선 광전자 분광법, X-선 회절분석기, 접촉각 측정기로 측정하였고, 탄소섬유 강화 복합재료의 기계적 계면 물성은 층간전단강도(interlaminar shear strength, ILSS)와 파괴인성(critical stress intensity factor, $K_{IC}$)측정을 통하여 알아보았다. 실험결과로부터, 기계적 계면물성은 탄소섬유 표면에 COOH group과 도금된 구리함량이 증가됨에 따라 순차적으로 증가되는 것이 확인되었으나, 도금시간을 길게 하여 과량의 구리가 도입되었을 경우 기계적 계면 물성을 도리어 감소시키는 것으로 확인되었다. 결론적으로 구리함량이 탄소섬유 복합재료의 기계적 계면물성을 결정하는 중요 요소라 판단되나, 최적의 함량이상에서는 계면분리에 의한 물성저하의 원인이 될 수 있다.