• Journal of Microbiology and Biotechnology
• /
• v.21 no.9
• /
• pp.988-994
• /
• 2011

A significant amount of nitrous oxide ($N_2O$), which is one of the serious greenhouse gases, is emitted from nitrification and denitrification of wastewater. Batch wastewater nitrifications with enriched nitrifiers were carried out under oxygen-limited condition with synthetic (without organic carbon) and real wastewater (with organic carbon) in order to find out the effect of ammonium concentration on $N_2O$ emission. Cumulated $N_2O$-N emission reached 3.0, 5.7, 6.2, and 13.5 mg from 0.4 l of the synthetic wastewater with 50, 100, 200, and 500 mg/l ${NH_4}^+$-N, respectively, and 1.0 mg from the real wastewater with 125 mg/l ${NH_4}^+$-N. The results indicate that $N_2O$ emission increased with ammonium concentration and the load. The ammonium removal rate and nitrite concentration also increased $N_2O$ emission. Comparative analysis of $N_2O$ emission from synthetic and real wastewaters revealed that wastewater nitrification under oxygen-limited condition emitted more $N_2O$ than that of heterotrophic denitrification. Summarizing the results, it can be concluded that denitrification by autotrophic nitrifiers contributes significantly to the $N_2O$ emission from wastewater nitrification.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.1
• /
• pp.129-134
• /
• 2010

Low-carbon Green Growth is highlighted as the main political issue from in and outof Korea. Recently Korean government announced the vision for low-carbon green growth. Considering this as a starting point the carbon emission estimation has become an important factor in the city planning. In order to realize the carbon reduction planning, this research was focused on the trend analyzes between the carbon exhaust estimation as well as the land use change for the past 40 years in Jinju. The image processing data of past aerial photography and the land suitability assessment databases were used to collect the useful information's for the land trend analysis for 40 years. As the results, the land use changes by new residential developments have led to increase the carbon emissions and population concentration rapidly. The urban management planning for low carbon and green growth should consider carbon emissions by population growth derived from land use change. Further research need to estimate the accurate carbon exhaust using relationship model with fuel consumption, carbon estimation, and land use.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.1046-1057
• /
• 2017

Country-specific emission factors should be developed and used instead of IPCC defaults to improve national GHG inventories to Tier 2 and above. Since the country-specific emission factors depend on the type of energy source, energy process, and time trend, identifying the value of each energy source is an important part of building an accurate inventory. In this study, calorific value and carbon emission factor for petroleum energy sources on the basis of calorific value conversion standard for energy source, which are notified in Korea, are collected by 2013 and 2016, and calorific value, carbon content and carbon emission factor And a comparative analysis was conducted. In addition, net calorific values and carbon emission factors calculated for each petroleum based energy source are compared with those shown in 2006 IPCC Guideline.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.1
• /
• pp.30-36
• /
• 2005

This study is to investigate a damage estimation of single edge notched tensile specimens as a function of acoustic emission(AE) according to the uni-directionally oriented carbon fiber/epoxy composites, CFRP In fiber reinforced composite materials, AE signals due to several types of failure mechanisms are typically observed. These are due to fiber breakage, fiber pull-out matrix cracking, delamination, and splitting or fiber bundle breaking. And these are usually discriminated on the basis of amplitude distribution, event counts, and energy related parameters. In this case, AE signals were analyzed and classified 3 regions by AE event counts, energy and amplitude for corresponding applied load. Bath-tub curve shows 3 distinct periods during the lifetime of a single-edge-notch(SEN) specimen. The characterization of AE generated from CFRP during SEN tensile test is becoming an useful tool f3r the prediction of damage failure or/and failure mode analysis.

• Composites Research
• /
• v.35 no.2
• /
• pp.61-68
• /
• 2022

Composite materials have been used in aerospace industry and many applications because of many advantages such as specific strength and stiffness and corrosion resistance etc. However, it is vulnerable to impacts, these impact lead to formation of cracks in composite laminate and failure of structures. In this paper, we analyzed Mode I fracture toughness of Carbon/Epoxy laminates using acoustic emission signal. DCB test was carried out to analyze Mode I failure characterization of Carbon/Epoxy laminates, and AE sensor was attached to measure AE signal induced by failure of specimen. Fracture toughness was calculated using cumulative AE energy and measured crack length using camera. The calculated fracture toughness was applied in FE model and the result of FE analysis compared with DCB test results. The results show good agreement with between FEM and DCB test results.

• Journal of Korean Society of Rural Planning
• /
• v.26 no.2
• /
• pp.61-70
• /
• 2020

The purpose of this study is to calculate the annual carbon reduction of crops according to the carbon fixation method of agricultural land, therefore to analyze whether the economic inducement of farmers to switch from single cropping to double cropping if the amount of carbon reduction were traded on the Korea Exchange. The analysis targets were Gyeonggi Province, which was divided into four areas to compare the difference between agricultural income and carbon income by crop and cropping system. Agricultural profit was estimated by multiplying the prior data of 2012 by the change rate of the consumer price index, and carbon income was calculated through the carbon reduction for each crop and the average transaction price of KAU19 traded on the Korea Exchange. According to the analysis, the profit rate of double cropping in all areas is -110.4% to 23% compared to single cropping, when only agricultural profit is taken into account, with no economic inducement for farmers to change the cropping system. However, when carbon income is taken into account together, the profit rate of double cropping rises significantly from 122.5% to 238.9% over a single operation in all areas, resulting in an economic inducement to switch the cropping system. This research is meaningful in that farming households could raise their income by additional carbon income, and that carbon credits could be supplied at Korea Exchange to further boost the carbon emission exchange.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.2
• /
• pp.37-46
• /
• 2004

The electrochemical adsorption of the Ag ions from aqueous solution on pelletized activated carbon monolith was investigated over wide range of operation time. The adsorption capacities of pelletized activated carbon monolith are associated with their internal porosity and are related properties such as surface area, pore size distribution. The chemical industry generates wastewater that contains toxic matters like heavy metals in small concentrations so that their economic recovery is not feasible. But, the method using activated carbon monolith can be used to withdrawal of heavy metals in waste water. After the electrochemical treatment, the quantitative properties in Ag ion solutions are also examined by pH concentration and studied elemental analysis by ICP-Atomic Emission Spectrometer and Energy Disperse X-ray (EDX) spectra. It is consider that the pH is very important factor at the reason of water pollutant with increasing acidity in industrial field. The result of quantitative analysis using Inductively Coupled Plasma-Atomic Emission Spectrometer of metal after electrochemical reaction in Ag ions solution depending on time are shown that the amount of Ag ions deposited was decreased with growth of Ag particles on the carbon surfaces as increasing electrochemically treated time. And, surface morphologies are investigated by scanning electron microscopy (SEM) to explain the changes in adsorption properties.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.49-50
• /
• 2000

5.2" microtip field emission displays (FEDs) with high voltage applications are fabricated. Nano-structural analysis on microtips is performed for the reliable operation of FEDs. Chemical compositions on the apex of microtips are fully analyzed. A charging mechanism on spacers is simulated and experimentally confirmed with micro-images. A gas-aging mechanism is also studied with integration step of FEDs. The brightness of more than 300 $cd/m^2$ is achieved. In addition, as a new concept, 9" color carbon nanotube FEDs (CNT-FEDs) are introduced using well-aligned carbon nanotubes on glass substrates by paste squeeze and surface treatment techniques. A number of carbon nanotubes, $5-10/{\mu}m2$, are uniformly distributed over a large area. The turn-on fields of 1 $V/{\mu}m$ and field emission currents of 1.5 mA at 3 $V/{\mu}m$ are acquired. Different mechanisms between microtip FEDs and CNT-FEDs are discussed.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.04a
• /
• pp.109-109
• /
• 2000

Recently, carbon nanotube has been investigating for field emission display ( (FED) applications due to its high electron emission at relatively low electric field. However, the growing of carbon nanotube generally requires relatively high temperature processing such as arc-discharge (5,000 ~ $20,000^{\circ}C$) and laser evaporation (4,000 ~ $5,000^{\circ}C$) methods. In this presentation, low temperature growing of carbon nanotube by plasma enhanced chemical vapor deposition (PECVD) using nickel catalyst which is compatible to conventional FED processing temperature will be described. Carbon n notubes with average length of 100 run and diameter of 2 ~ $3\mu$ill were successfully grown on silicon substrate with native oxide layer at $550^{\circ}C$using nickel catalyst. The morphology and microstructure of carbon nanotube was highly depended on the processing temperature and nickel layer thickness. No significant carbon nanotube growing was observed with samples deposited on silicon substrates without native oxide layer. This is believed due to the formation of nickel-silicide and this deteriorated the catalytic role of nickel. The formation of nickel-silicide was confirmed by x-ray analysis. The role of native oxide layer and processing parameter dependence on microstructure of low temperature grown carbon nanotube, characterized by SEM, TEM XRD and R없nan spectroscopy, will be presented.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.3
• /
• pp.291-300
• /
• 2013

The main purpose of this study is to analyse economic feasibility of low-carbon-oriented gear for anchovy boat seine. The results of benefit/cost analysis showed that use of the low-carbon fishing gear is economically feasible. Considering the fuel saving and relatively low $CO_2$ emission by reducing the resistance of gear, net present value by such type 1 gear improvement was estimated about -2,490 ~ -1,580 million won with the benefit-cost ratio 0.81~ 0.88. And net present value by such type 2 gear improvement was estimated about 6,540 ~ 7,780 million won with the benefit-cost ratio 1.79 ~ 1.94. Development of lowcarbon trawl gear would render significant contributions to reducing $CO_2$ emission in fishing operations and lead to reduce fishing costs due to fuel savings.