• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.307-312
• /
• 2003

The object of this study is to investigate a damage estimation of single edge cracked tensile specimens ($2_a$/W) as a function of acoustic emission (AE) according to the unidirectionally oriented carbon/epoxy composites, CFRP AE signals were analyzed and classified 3 regions by event counts, energy and amplitude for coressponding applied load. On tensile loading and using the results of the AE analysis, it was found that the event counts, cumulative counts or energy, and amplitude distributions useful for the prediction of damage failure.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.1083-1087
• /
• 1997

Every effort is now being exerted in industrialized and developing countries to reduce emission of greenhouse gases from electric power sector. In this paper, we provide supply-side resource mix strategies in the long-term generation expansion planning under the expected greenhouse gas regulations. Under the environmental regulations, we explore the least-cost generation expansion plan of Korea and determine the composition of future resource mixes. Our analysis is performed on the basis of the revised WASP package which can evaluate emission of carbon dioxide from each power plant. The evaluation process of carbon dioxide emissions, which can consider the efficiency and operating conditions of each generator simultaneously, has been incorporated into the probabilistic production cost simulation module of WASP.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.194-195
• /
• 2009

According to the issue "global warming", many regulations and agreements with countries in the world are becoming set and it is being fulfill now. Under the progress of Post Kyoto Protocol agreement, It will be sure that Korea rave a duty to reduce $CO_2$ emission from 2013. For them, Korea have to make a strategies about the Climatic Change Convention for all industries. Recently, a great attention about $CO_2$ emission in the world is focused on port, shipping line and airline. Most countries are establishing policies to prevent environment from these industry fields, but Korea has not yet made for them. Thus, Korea need to collect $CO_2$ emission data not only the routes of container from port but also activities in the port. In this paper, an estimation of $CO_2$ emission under the route of container transportation at Korea by using O/D analysis will be addressed. And then, it will be used to make a optimal routes of container transportation which can reduce $CO_2$ emission in future.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.1
• /
• pp.69-76
• /
• 2010

While increased use of motor cycles in the recent years for various demands could worsen air quality, only few studies have been conducted on estimation of emission factors and characterization of emissions from motorcycle. In this study, emissions from selected six models of motorcycle based on largest market share and production rate were investigated. To investigate gaseous and carbonaceous air pollutants, such as carbon monoxide (CO), total hydrocarbon (THC), nitrogen oxide ($NO_x$), elemental carbon (EC) and organic carbon (OC), total 124 motorcycles between 2003 and 2007 model year were tested with regulatory driving conditions, such as CVS-40 and CVS-47 mode. These motorcycles were further sub-categorized based on their displacement (< 50 cc, 50~150 cc, and $\geq$ 150 cc), type of stroke (2- and 4 strokes) and model year (2003~2005 and 2006~2007). Tested motorcycles with recent model year (2006~2007) exhibited less emissions of regulatory gaseous and carbonaceous air pollutants compared to old model year (2003~2005). Chemical analysis showed that CO present in highest concentration followed by THC and $NO_x$ for all tested motorcycles. Interestingly, two strokes motorcycle produced higher THC emission but less CO and $NO_x$ than those of four strokes. For all types of displacement and stroke, emission factors (gram per kilometer) of THC and CO except $NO_x$ with recent model year (2006~2007) showed decreased trend compared to old model year (2003~2005). In addition to this, due to mixed combustion between gasoline fuel and lubricant, two strokes motorcycle showed OC > EC emission trend.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.1
• /
• pp.65-71
• /
• 2019

The development of adsorbed natural gas (ANG) has emerged as one of potential solutions. It is desirable to reduce the weight of vessel by applying light-weighed a composite carbon fiber in order to response to a egulation of $CO_2$ emission. Through understanding of a composite carbon fiber, and material characteristic of a composite carbon fiber is required in order for better application of a reduction of weight and an analysis of material characteristic. Herein, this study suggest the composite carbon fiber vessel applied to the characteristic of carbon fiber, and it decides the preliminary shape based on the test of material characteristic for ANG vessel applied to a composite carbon fiber, and its basic shape calculate through on the netting theory. Moreover, the detail shape design is analyzed by a finite element analysis, and in the stage of detail sahp design and analysis of stress was performed on the typical shape using a finite element analysis, and the result of preliminary design was verified.

• Composites Research
• /
• v.30 no.5
• /
• pp.267-272
• /
• 2017

In this study, SiC powder was added to twill woven carbon fiber reinforced plastic (CFRP) composites to improve its mechanical properties. An acoustic emission (AE) frequency analysis method was suggested for the prediction of failure behaviors. Tensile tests were conducted and the fracture characteristics of each component of the SiC reinforced composite were evaluated using AE. The results showed that SiC powder improved the strength of twill woven CFRP composites and the fracture behavior of the SiC reinforced CFRP composite and its crack extension could be effectively evaluated on the basis of the specific AE frequency bands which are 100 to 228 kHz and 428 to 536 kHz upon the resin failure and 232 to 424 kHz due to addition of SiC powder and 576 to 864 kHz at the fiber breakage.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.4
• /
• pp.217-223
• /
• 1994

Carbon dioxide emission has been increased by 7% in an annual average toward 212.5 million tons in 1990 from 108.7 million tons in 1980. Among emissions in 1990, industry, residential / commercial, transportation, other and non-energy have occupied 91.12, 68.04, 42.13, 7.13 and 4.09 million tons respectively. The Korea-scenarios corresponding to those of IPCC that is Intergovernmental Panel on Climate Change (A : modest control of $CO_2$; B : stringent control of $CO_2$, C: shifting fuel to renewable and nuclear energy in the second half of the next century ; and D: shifting fuel to renewable and nuclear energy in the first half of the next century show that the global-scale contributions of atmospheric $CO_2$ concentration are 0.77, 0.64 and 0.78% in 2050 for cases A,B, and C respectively. In all cases, the contributions were smaller than 0.09 % in 1985.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.110-111
• /
• 2023

As carbon neutrality has recently emerged as a global issue, the carbon neutral roadmap of MOF has been established and various strategies have been proposed to achieve carbon neutrality in the entire marine industry. The port sector is also included in the target for greenhouse gas reduction, but emissions are not being measured due to limitations in data collection and no inventory construction. For building a carbon-neutral port, it is essential to calculate and forecast emissions and set reduction targets. Accordingly, in this study, CO₂ emitted from domestic port equipment was calculated according to the IPCC Guildeline's emission calculation method, and future emission was estimated. As a result of the analysis, about 420,000 tons of CO₂ was emitted based on the cargo volume in 2020, and emissions are expected to continue to increase in proportion to the increase and about 720,000 tons will be emitted by 2050. In order to achieve carbon neutrality of the port, it needs to promote emission reduction by converting the power source for oil-based equipment to eco-friendly fuel. Also container and miscellaneous ports which require complicated cargo handling need to effort to reduce CO₂.

• Smart Structures and Systems
• /
• v.19 no.2
• /
• pp.127-136
• /
• 2017

Fiber reinforced polymer (FRP) has received widespread attention in the field of civil engineering because of its superior durability and corrosion resistance. This article presents the damage mechanisms of a novelty composite called carbon nanofiber modified flax fiber polymer (CNF-modified FFRP). The ability of acoustic emission (AE) to detect damage evolution for different configurations of specimens under uniaxial tension was examined, and some useful AE characteristic parameters were obtained. Test results shows that the mechanical properties of modified composites are associated with the CNF content and the evenness of CNF dispersed in the epoxy matrix. Various damage mechanisms was established by means of scanning electron microscope images. The fuzzy c-means clustering were proposed to classify AE events into groups representing different generation mechanisms. The classifiers are constructed using the traditional AE features -- six parameters from each burst. Amplitude and peak-frequency were selected as the best cluster-definition features from these AE parameters. After comprehensive comparison, a correlation between these AE events classes and the damage mechanisms observed was proposed.

• Environmental Engineering Research
• /
• v.25 no.1
• /
• pp.71-79
• /
• 2020

This paper uses super-efficiency DEA model and Malmquist index to evaluate the carbon emission efficiency (CEE) values of the nine western provinces along the "Silk Road Economic Belt" for the period from 2000 to 2015, and analyses the influencing factors of the CEE. The major findings of this study are the following: (1) the overall CEE of the nine western provinces is not high, and there are significant inter-provincial differences in the CEE. Meanwhile, the provinces with higher levels of economic development generally have higher CEE. (2) The annual total factor productivity (TFP) of the nine western provinces, which is mainly determined by technological change, is greater than 1. Moreover, the total average growth rate of the TFP is 15.5%. (3) The CEE of the nine western provinces is not spatially dependent. In addition, the urbanization, openness, use of energy-saving technologies and research and development (R&D) investment have a significant positive impact on the CEE values, while the industrial structure, foreign direct investment, fixed asset investment, government expenditure levels and energy structure have a significant negative impact on the CEE. Among them, R&D investment is the primary factor in promoting the development of CEE, and the government expenditure has the greatest negative impact on the CEE.