• 열처리공학회지
• /
• 제16권3호
• /
• pp.141-147
• /
• 2003

The effects of heat treatment on the fatigue life and welding residual stress of welded plates were investigated in this study. The plates were welded by flux cored arc welding process, and post weld heat treated at $600^{\circ}C$ for 1 hour. The residual stresses of welded plates before and after post weld heat treatment were measured by hole drilling method. To measure the fatigue life of welded plates, low cycle fatigue tests under strain control and high cycle fatigue tests under load control were performed respectively, by using cylindrical specimens containing weld metal and heat affected zone. The obtained result shows that the post weld heat treatment reduces the residual stress, and resultantly changes the fatigue life of welded plate. Goodman diagrammatic analysis has also been performed to study the effect of post weld heat treatment on the high cycle fatigue life.

• 한국화재소방학회논문지
• /
• 제22권5호
• /
• pp.43-47
• /
• 2008

최근에 이차이온질량분석기(Secondary Ion Mass Spectrometry)를 이용한 1 2차 용융흔 구별에 관한 연구가 많은 관심을 끌고 있다. 동선의 깊이 분포에 따른 $^{12}C^-$, $^{63}Cu^-$, $^{18}O^-$, $^{35}Cl^-$ 이차 이온을 검출하기 위해 Cs+ 일차 이온빔을 사용하였고, 본 논문에서는 과전류에 의한 동선의 열적 확산에 대해 분석하였다. 분석결과 PVC 절연피복이 덮인 동선이 보다 더 깊이 탄소와 염소가 확산함을 보였으나, 산소는 절연피복이 덮이지 않은 동선이 더 깊이 확산된 것을 보였다.

• 한국재료학회지
• /
• 제25권5호
• /
• pp.238-246
• /
• 2015

$H_2S$ is a flammable toxic gas that can be produced in plants, mines, and industries and is especially fatal to human body. In this study, CuO nanowire structure with high porosity was fabricated by deposition of copper on highly porous singlewall carbon nanotube (SWCNT) template followed by oxidation. The SWCNT template was formed on alumina substrates by the arc-discharge method. The oxidation temperatures for Cu nanowires were varied from 400 to $800^{\circ}C$. The morphology and sensing properties of the CuO nanowire sensor were characterized by FESEM, Raman spectroscopy, XPS, XRD, and currentvoltage examination. The $H_2S$ gas sensing properties were carried out at different operating temperatures using dry air as the carrier gas. The CuO nanowire structure oxidized at $800^{\circ}C$ showed the highest response at the lowest operating temperature of $150^{\circ}C$. The optimum operating temperature was shifted to higher temperature to $300^{\circ}C$ as the oxidation temperature was lowered. The results were discussed based on the mechanisms of the reaction with ionosorbed oxygen and the CuS formation reaction on the surface.

• 한국수소및신에너지학회논문집
• /
• 제12권3호
• /
• pp.231-238
• /
• 2001

Electrocatalytic activity of palladium for hydrogen oxidation and reduction was studied using AC impedance method. The system under study was arranged in electrolytic mode consisting of Pd electrode under study, Pt counter electrode and Nafion electrolyte between them. Two types of Pd electrodes were used - carbon-supported Pd (Pd/C) and Pd foil electrode. Pd/C anode contacting pure hydrogen showed a steady decrease of charge transfer resistance with the increase of anodic overpotential, which is an opposite trend to that found with Pd foil anode. But Pd foil cathode also exhibited a decrease of the resistance with the increase of cathodic overpotential. The relationship between imposition of overpotential and subsequent change of the charge transfer resistance is determined by the ratio of the rate of faradaic process to the rate of mass transportation; if mass transfer limitation holds, increase of overpotential accompanies the increase of charge transfer resistance. Regardless of the physical type of Pd electrode, the anode contacting hydrogen/oxygen gas mixture did not reveal any independent arc originated from local anodic oxygen reduction.

• 한국응용과학기술학회지
• /
• 제2권2호
• /
• pp.47-53
• /
• 1985

Correlation among the wax-pigment composites which is base vehicles for the crepas was investigated in terms of fadeness. The base wax synthesized and pigments are compounded with petroleum lubricant and exposed under carbon arc individually. The yellowing phenomenon was appeared on the reference papers coated with the spindle oil which was then exposed. The papers were again extracted with distilled water and pH of them were ranged between 6.2-6.5. Color difference from Adam-Nickerson equation, ${\vartriangle}E$ of base wax is 0.15 and that of spindle oil are varied from 0.66 to 15.62. Since the main components of the petroleum lubricant are aromatic hydrocarbons which have absorptions characteric of UV ranging from 240 to 280 nm, fadeness characteristics of the composites are largely depend upon the change of molecular structure of spindle oil by absorbing UV. Thus the spindle oil having the following physical properties has the better resistance of fadness and is recommended to use in compounding the base wax-pigment composites: ${\cdot}$ main component: paraffinic hydrocarbon ${\cdot}$ pour point: below - $15^{\circ}C$ ${\cdot}$ UV absorption characteristics: ${\lambda}max.$ : 268-290nm ${\cdot}$ absorbancy: below 0.1(0.03ml of sample/50ml of $CHCl_3$)

• 한국염색가공학회지
• /
• 제8권3호
• /
• pp.24-30
• /
• 1996

In order to investigate the light fastness of amino azo disperse dyes, some kinds of disperse dyes were prepared and dyed to polyester fabric under the different conditions, such as single or mixture state. After the dyed fabric was irradiated with carbon arc light for several hours, the color differences and K/S values of fabric were measured. The light fastness of amino azo disperse dye was decreased by the introduction of OH group to the dye molecule. But when the amino azo dye was mixed with the anthraquinone disperse dye, the light fastness was increased. It was considered that the dye molecules were aggregated on account of hydrogen bonding via OH groups, resulting the decrease of surface area of dye molecule which might be irradiated by the light.

• 전기학회논문지
• /
• 제57권4호
• /
• pp.635-640
• /
• 2008

New gas mixtures are now finding applications such as interrupting media for high-voltage circuit breakers. These mixtures consist of a high content of carbon tetrafluoride($CF_4$) added to sulfur hexafluoride($SF_6$). Nowdays $SF_6$ has been established for the use in gas insulated substations due to its high insulation withstand level and good arc quenching capability. At this paper Breakdown characteristics were investigated for $SF_6/CF_4$ mixtures when AC voltage and standard lightning impulse voltage(LI) was applied in a needle-plane electrodes. And partial discharge(PD) experiments were carried out in the test chamber which was made in needle-plane electrode. And ${\Phi}$-Q-N distribution of partial discharge signals was analyzed. The total pressure of the $SF_6/CF_4$ mixtures was varied within the range of 0.1-0.5 Mpa in the test chamber. The breakdown voltage in needle-plane electrode displayed N shape characteristics for increasing the content of $SF_6$ at positive impulse voltage and the PD inception voltage was increased slightly when pressure of $SF_6/CF_4$ Mixtures was increased. Maximum PD inception voltage is showed in 80% SF6/20%$CF_4$.

• 한국추진공학회지
• /
• 제23권2호
• /
• pp.68-77
• /
• 2019

고체 및 액체 로켓 추진 기관 내열부품으로 사용하기 위하여 C/SiC 복합 재료를 LSI(Liquid Silicon Infiltration) 공법으로 개발하였다. 조성비에 따른 내열 특성은 아크 플라즈마, 초음속 토치 시험으로 평가하였으며 $H_2O$ 및 $CO_2$ 산화에 의한 유효 삭마식을 제시하였다. 연소시험을 통하여 고체 및 액체 추진기관용 노즐목 삽입재, 확대부 내열재 및 연소실 내열부품 등 다양한 형상으로 제작이 가능함을 확인하였으며 높은 내삭마 성능과 열구조 성능이 입증되었다.

• Tribology and Lubricants
• /
• 제35권2호
• /
• pp.106-113
• /
• 2019

We investigated the application of tetrahedral amorphous carbon (ta-C) coatings to fabricate a glass lens manufactured using a glass molding process (GMP). In this work, ta-C coatings with different thickness (50, 100, 150 and 200 nm) were deposited on a tungsten carbide (WC-Co) mold using the X-bend filter of a filtered cathode vacuum arc. The effects of thickness on mechanical and tribological properties of the coating were studied. These ta-C coatings were characterized by atomic force microscopy, scanning electron microscopy, nano-indentation measurements, Raman spectrometry, Rockwell-C tests, scratch tests and ball on disc tribometer tests. The nano-indentation measurements showed that hardness increased with an increase in coating thickness. In addition, the G-peak position in the Raman spectra analysis was right shifted from 1520 to $1586cm^{-1}$, indicating that the $sp^3$ content increased with increasing thickness of ta-C coatings. The scratch test showed that, compared to other coatings, the 100-nm-thick ta-C coating displayed excellent adhesion strength without delamination. The friction test was carried out in a nitrogen environment using a ball-on-disk tribometer. The 100-nm-thick ta-C coating showed a low friction coefficient of 0.078. When this coating was applied to a GMP, the life time, i.e., shot counts, dramatically increased up to 2,500 counts, in comparison with Ir-Re coating.

• Journal of Acupuncture Research
• /
• 제38권4호
• /
• pp.325-330
• /
• 2021

In this Case Report, a patient with Buerger's disease who had a leg amputation below his lower right knee and a vascular bypass of right leg, developed a wound caused by his prosthetic leg and subjective discomfort. The patient received skin flap surgery but the wound did not heal properly. He was admitted to the Korean Medicine Hospital where his wound, right leg coldness, and phantom pain were treated with combined Korean medicine. The patient was hospitalized again where he underwent micro-drilling surgery. The patient was re-admitted to the Korean Medicine Hospital where he received combined Korean medicine treatment (CKMT) and carbon arc light treatment (CALT) for his wound, leg coldness, stiffness, and hypoplasia. The temperature of his right leg increased, the numeric rating scale score for assessing pain fell from 5 to 1.5, and subjective discomfort was reduced (< 20%) suggesting this may be an effective treatment.