• Carbon letters
• /
• v.11 no.3
• /
• pp.184-191
• /
• 2010

Carbon nanotubes are unique tubular structures of nanometer diameter and large length/diameter ratio. The nanotubes may consist of one up to tens and hundreds of concentric shells of carbons with adjacent shells separation of ~0.34 nm. Multiwalled carbon nanotubes were synthesized by arc-discharge technique. MWCNTs were formed at the cathode deposit along with other carbonaceous materials like amorphous carbon, graphite etc. However, to get the best advantage of carbon nanotubes in various advanced applications, these undesired carbonaceous materials to be removed which is a challenging task. In the present study, various techniques were tried out for purifying MWCNTs such as physical filtration, chemical treatment and thermal annealing. SEM, FTIR, TGA and BET techniques were used to characterize the CNTs at various stages. Results shows that suitable chemical treatment followed by thermal annealing under controlled flow of oxygen gives the better route for purification of carbon nanotubes.

• Textile Coloration and Finishing
• /
• v.27 no.4
• /
• pp.288-300
• /
• 2015

This study was executed to substitute Carbon-arc method, which is a method currently used for testing light-fastness of military textile products, with Xenon arc method. Specimens used in the study were classified according to the fabric material and color of military textile products and were composed of 11 items of 42 kinds with different colors. Light-fatness test was done by comparing the result of Carbon-arc(KS K 0700) and Xenon arc(KS K ISO 105-B02) method. In Xenon arc method, blue wool reference materials of 1~8 was used, and exposure condition preferred in American continent and light exposure method 3 were applied. After testing with both methods, grade of light-fastness, color difference, reflectance and color were examined. Even though there was a slight difference among 42 specimens used in the test, results exceeded the quality standard both in Carbon-arc-lamp and Xenon arc-lamp. Therefore, it was confirmed that applying KS K ISO 105-B02 together in the KS K 0700-regulated Ministry of National Defense standard and purchase order would also fit.

• The Journal of Korean Physical Therapy
• /
• v.18 no.6
• /
• pp.13-21
• /
• 2006

Purpose: To provide the basic method for physical therapy to contribute to early stage treatment of a burned patients. We investigated whether or not carbon arc lamp treatment and low level laser one among various laser treatments have the effect of reducing Cytokine, and to elucidate the effect of carbon arc lamp treatment and laser one. Methods: The 6-week old BALB/c types of 92 mice were used for the experimental test, and they were burned with $100^{\circ}C$ water, they were divided into 4 groups in accordance with the method of treatment respectively. And the blood and the tissue from the subject of each group were extracted and analyzed each time after they were cured for 3, 6, 9 days. For the analysis of the results, SPSS statistical program was used in this study. Results: The quantity of $TNF-{\alpha}$ and $IL-1{\beta}$ within the blood of a burned mouse increased more than that of a normal mouse(p<0.01). In only a burned mouse, carbon arc lamp treatment gave the effect on the decrease of $TNF-{\alpha}$ thickness the 6th day to the 9th day(p<0.01). $IL-1{\beta}$ quantity was more decreased than that of control group around the 6th day. In comparison with only a control group, low level laser treatment has more significant effect in decreasing the quantity of $TNF-{\alpha}$ a and $IL-1{\beta}$ than the two different methods(p<0.01). In case that the two treatment methods, carbon arc lamp treatment and low level laser, were executed together, there was the effect of decreasing $TNF-{\alpha}$ until the 6th day(p<0.01). Conclusion: Both low level laser treatment and carbon arc lamp one would be able to have an effect on the inflammation inhibition of burned patients and tissues reproduction. However, it must be also considered for the two treatments to be done at the same time.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.19 no.3
• /
• pp.185-193
• /
• 2015

Objectives The purpose of this report is to represent decubitus ulcer(pressure sore) improved by carbon arc and oriental medicine. Methods Patients with decubitus ulcer were treated with carbon arc, acupuncture, herbal medicine and simple dressing. Laser was irradiated at ulcer site once a day for 5 hour, using cored carbon number 3000,3002. Simple dressing with wound cleansing was performed to prevent reinfection. Herbal medicine and acupuncture treatment were applied to improve patients' general condition. Ulcer sizes and aspects were carefully checked by one week. Results Sizes of the decubitus ulcer decreased. Stage of ulcer was improved from stage 3 to stage 2. These results show that carbon arc may play a role in treating the decubitus ulcer with oriental medicine.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.21 no.2
• /
• pp.154-164
• /
• 2008

Epidermolysis Bullosa(EB) is rare, chronic mechanobullous disease, which easily produce bulla by minor trauma or spontaneously. There are three major forms of Epidermolysis bullosa - Epidermolysis bullosa simplex, Junctional epidermolysis bullosa, Dystrophic epidermolysis bullosa. This report is on the 21-year-old female patient who has Dystrophic epidermolysis bullosa(Recessive Dystrophic epidermolysis bullosa-mitis). The Korean medical treatments such as acupuncture and herbal medication were used, with light therapy : Carbon Are, which is known for effect of dermal resuscitation. As a result, Carbon Arc and Korean medical treatment's effect of dermal resuscitation is proved in this study. But more cases are necessary for establishing more effective treatment methods.

• Journal of Korean Society for Quality Management
• /
• v.44 no.3
• /
• pp.509-526
• /
• 2016

Purpose: We would like to find the alternative method for the weathering test on rubber coated fabrics and adhesive-coated fabrics for the military products, KS M 0706 (Sunshine carbon arc) to KS M ISO 4892-2 (Xenon arc). Methods: We measured the tensile strength of adhesive-coated fabrics and adhesive products treated with sunshine carbon arc and xenon arc during 100, 150 and 200 hours, respectively. All of the results were treated with statistical test, ANOVA method. We also validate the surface modifications caused by treatment method and time by using FT-IR ATR and, SEM. Results: In case of the thick adhesive-coated fabrics (app. 1 mm), there was no distinctive difference on tensile strength by treatment method and time. In case of the thin mask hood (app. 0.22 mm) and TENT (app. 0.5 mm), there was distinctive difference on tensile strength. Especially, carbon arc showed a huge lowering properties. We could validate the curing from light and moisture, and the functional group change from cross-linking and oxidation using FT-IR ATR. In case of IBS, there was a surface cracks on SEM images. In case of mask hood, there was no distinctive differences, except for a particle falling from decreased affinity between rubber and particles caused by carbon arc. Conclusion: We concluded that there was no problems for changing xenon arc weathering test with same treatment time on IBS, KM7, K21 and adhesive products. In case of TENT and mask hood, there was a difference in tensile strength in accordance with the change of the treated time and method.

• Annals of Occupational and Environmental Medicine
• /
• v.34
• /
• pp.19.1-19.9
• /
• 2022

Background: It is widely known that carbon dioxide (CO₂) arc welding generates carbon monoxide (CO). However, to the best of our knowledge, no case reports have been published regarding CO poisoning in CO₂ arc welders. Therefore, we aimed to report a case of CO poisoning-induced encephalopathy in a CO₂ arc welder in the Republic of Korea to inform about the dangers of CO exposure among CO₂arc welders. Case presentation: A 40-year-old man working as a CO₂ arc welder for 15 years visited a local hospital with a tremor, involuntary urination, and speaking gibberish, on April 9, 2019. He stated that he had intermittent headache and forgetting symptoms for the last 5 years, and had been lost on the way to work several times. On April 9, 2019, he was diagnosed with CO poisoning-induced encephalopathy through brain magnetic resonance imaging. He received hyperbaric oxygen therapy, and some of his symptoms improved. According to the exposure assessment of his work environment, he was continuously exposed to high concentrations of CO for 15 years while operating CO₂ arc welding machines. Conclusions: After evaluating the patient's work environment and evaluating his medical history, we concluded that his encephalopathy was caused by CO exposure during CO₂ arc welding. Thus CO₂ arc welders must be aware of the risk of CO poisoning and strive to avoid CO exposure.

• Korean Journal of Materials Research
• /
• v.18 no.5
• /
• pp.253-258
• /
• 2008

A simple method to deposit carbon nanotube films uniformly on large area substrates using an arc discharge method is reported in this paper. The arc discharge method was modified to deposit carbon nanotube films in situ on the substrates. The substrates were scanned several times over the arcing point for a uniform film thickness. Deposition was carried out under variable dc bias conditions at 600 torr of $H_2$ gas. The thickness uniformity of the single-wall carbon nanotube films as characterized by a four-point probe was within 30% deviation. The morphology and crystal quality of the single-wall carbon nanotube film were also characterized by field emission scanning electron microscopy and Raman spectroscopy.

• Carbon letters
• /
• v.3 no.3
• /
• pp.142-145
• /
• 2002

Multiwall carbon nanotubes (MWNT) were produced using the arc-discharge graphite evaporation technique. Composite films were developed using MWNT dispersed in polystirol polymer. In the present work, various properties of the polymeric thin film containing carbon nanotubes were investigated by optical absorption, electrical resistivity and the same have been discussed.

• Korean Journal of Metals and Materials
• /
• v.48 no.10
• /
• pp.907-913
• /
• 2010

Hot-rolled steel plates of SPHC and SS400 were oxidized at 600, 750 and $900^{\circ}C$ for 2 hr in air. With an increase in the oxidation temperature, their oxidation rates increased, and this was accompanied by the formation of pores and cracks in the thickened oxide scales, which were non-adherent. SPHC steels manufactured by either an arc furnace or a blast furnace displayed similar oxidation rates, indicating that their oxidation rates were insensitive to the manufacturing process. Medium-carbon SS400 steel displayed somewhat faster oxidation rates than low-carbon SS400 steel, indicating that the carbon content did not significantly influence the oxidation rates.