• 한국환경과학회지
• /
• 제32권9호
• /
• pp.647-657
• /
• 2023

The study analyzes the forest status of each local government for Korean forests and believes that it can be used as basic data for setting the direction pursued by each local government. The study took into account the fact that the forest rate in Korea was 63.5%, because it was judged that the higher the proportion of forest area, the more important it was to use the characteristics of forests. The characteristics of forests were analyzed based on four factors in 12 factors to identify the location of the ground body by dividing seven types. In addition, basic information on carbon absorption sources was provided by grasping the ability of carbon absorption sources per year through the amount of forest resources to be analyzed. In addition, as a result of analyzing the characteristics of the weather for the promotion of carbon absorption sources, the flat area on the side of Gangneung Mountain was a warm forest with a warm index of 106.0.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.208-211
• /
• 2003

The dielectric carbon nitride thin films were deposited onto Si(100) using a pulsed laser ablation of pure graphite target combined with a high voltage discharge plasma in nitrogen gas atmosphere. We can be calculated dielectric constant, ${\varepsilon}_s$, with a capacitance Sobering bridge method. We reported to investigate the influence of the laser ablation of graphite target and DC high voltage source for the plasma. The properties of the deposited carbon nitride thin films were influenced by the high voltage source during the film growth. Deposition rate of carbon nitride films were found to increase drastically with the increase of high voltage source. Infrared absorption clearly shows the existence of C=N bonds and $C{\equiv}N$ bonds. The carbon nitride thin films were observed crystalline phase, as confirmed by x-ray diffraction data.

• 한국전기전자재료학회논문지
• /
• 제16권7호
• /
• pp.641-646
• /
• 2003

The dielectric carbon nitride thin films were deposited onto Si(100) substrate using a pulsed laser ablation of pure graphite target combined with a high voltage discharge plasma in the presence of a N$_2$ reactive gas. We calculated dielectric constant, $\varepsilon$$\_$s/, with a capacitance Schering bridge method. We investigated the influence of the laser ablation of graphite target and DC high voltage source for the plasma. The properties of the deposited carbon nitride thin films were influenced by the high voltage source during the film growth. Deposition rate of carbon nitride films were increased drastically with the increase of high voltage source. Infrared absorption clearly shows the existence of C=N bonds and C=N bonds. The carbon nitride thin films were observed crystalline phase confirmed by x-ray diffraction data.

• 한국분말재료학회지
• /
• 제1권2호
• /
• pp.181-189
• /
• 1994

The compacts of pure and phosphorus-coated iron powder with 0~0.8%C were sintered at $1100^{\circ}C$ for 40 min. in cracked ammonia gas atmosphere. The tensile and impact strengths were measured and the relationship of the results with carbon content, phosphorus, quenching and tempering was investigated. The results obtained can be summarized as follows : (1) The tensile strength of sintered compacts increased slowly with carbon content. Increase in tensile strength by heat treatment was evident especially in the low carbon specimen. The specimen with phosphorus showed higher strength compared to pure iron compacts value. (2) No inflection point of elasticplastic deformation on stress-strain curve was observed in sintered steel. The elastic modulus of sintered steel had the same tendency as tensile strength. But the elongation showed the opposite tendency. (3) The impact absorption energy of sintered steel without addition of phosphorus decreased successively with carbon content and by quenching and tempering. On the contrary, addition of phosphorus resulted in an increase of the impact absorption energy. Quenching and tempering did not affect the impact energy especially in high carbon content. (4) The main fracture source was pore in specimen and the propagation of crack occured mostly along the grain boundaries. But the intragranular fracture was also observed in high carbon, quenched and tempered specimen, and especially in the specimen with phosphorus.

• Elastomers and Composites
• /
• 제45권1호
• /
• pp.25-31
• /
• 2010

우리는 탄소 전구체로 활성탄 (AC), 활성탄 섬유 (ACF)와 탄소나노튜브 (MWCNT)와 티타늄 전구체로써 TNB를 사용하여 탄소-$TiO_2$ 복합체를 제조하였으며, 이들의 특성을 SEM, TEM, BET, XRD와 EDX를 이용하여 분석하였다. 그리고 이들의 광촉매 활성은 UV 램프 조사에서 일정한 농도의 MB 용액을 이용하여 측정하였다. UV 조사한 후에 MB의 농도는 UV-vis 분광광도기를 이용하여 측정하였다.

• Environmental Engineering Research
• /
• 제21권3호
• /
• pp.297-303
• /
• 2016

Global warming due to greenhouse gases is an issue of great concern today. Fossil fuel power plants, especially coal-fired thermal power plants, are a major source of carbon dioxide emission. In this work, carbon capture and utilization using sodium hydroxide was studied experimentally. Application for flue gas of a coal-fired power plant is considered. Carbon dioxide, reacting with an aqueous solution of sodium hydroxide, could be converted to sodium bicarbonate ($NaHCO_3$). A bench-scale unit of a reactor system was designed for this experiment. The capture scale of the reactor system was 2 kg of carbon dioxide per day. The detailed operational condition could be determined. The purity of produced sodium bicarbonate was above 97% and the absorption rate of $CO_2$ was above 95% through the experiment using this reactor system. The results obtained in this experiment contain useful information for the construction and operation of a commercial-scale plant. Through this experiment, the possibility of carbon capture for coal power plants using sodium hydroxide could be confirmed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.171-171
• /
• 2011

Co and Fe doped multi-wall carbon nano-tubes (MWCNTs) synthesized by microwave plasma enhanced chemical vapor deposition (PECVD) technique are investigated with synchrotron radiations at Pohang Light Source (PAL) and European Synchrotron Radiation Facility (ESRF). Near edge x-ray absorption spectroscopy (NEXAFS) measurement at C K, Co $L_{3,2}$ and Fe $L_{3,2}$-edges, and x-ray magnetic circular dichroism (XMCD) at Co and Fe $L_{3,2}$-edges have been carried at 7B1 XAS KIST and 2A MS beamline, respectively, to understand the electronic structure and responsible magnetic interactions at room temperature. X-ray absorption spectroscopy (XAS) at C K-edge shows significant p-bonding and Co and Fe L-edges proves the presence of $Co^{2+}$ and $Fe^{2+}$ in octahedral symmetry. Co and Fe doped MWCNTs show good XMCD spectra at 300K. The effect on the magnetism is also studied through swift heavy ion (SHI) radiations and magnetism is found enhanced and change in the electronic structure in Co-CNTs is investigated.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.111-112
• /
• 2017

Radon has been considered the greatest source of exposure within the total radiation exposure of the human body. xposure from radon, which exists in indoor air quality, lacks public perception, Radon, which exists anywhere on earth, is not regarded as a state of attention even if it is above the average level. Indoor radon exposure situations are not intentionally introduced, and essentially the attention and responsibilities of radon exposures are assumed to be in indoor occupants. So, these are caused by common uranium and thorium scattering on Earth, and are brought into the building by fine cracks or exposed indicators of the buildings. Therefore, this study aims to reduce the risk of radon rays and reduce radon, which induces diseases caused by breathing in the body of indoor air pollutants and emitting diseases by emitting alpha rays from the radon gas.

• 한국광학회지
• /
• 제15권5호
• /
• pp.449-454
• /
• 2004

광 리미터는 입사광의 세기가 커질때 투과율을 줄여서 눈과 센서를 보호하는 광소자이다. 최근에 높은 효율의 광 리미터 재료로 알려진 다중벽 탄소 나노튜브 분말을 증류수, 클로로포름, 에탄올, 에틸렌 글리콜과 같은 용매에 각각 섞어 현탁액을 만들고 실온에서 용매의 끓는점까지 온도를 변화시키면서 광 리미팅 효율의 변화를 관측하였다. 광원으로는 펄스폭이 6 ns이고 파장이 1064 nm인 Q-스위칭된 Nd:YAG 레이저 펄스를 사용하였다. 관측 결과, 다중벽 탄소 나노튜브 현탁액의 온도가 증가할수록 광 리미팅 효율이 나빠졌고 현탁액 용매의 끓는점, 점도 그리고 표면장력 값이 낮을수록 광 리미팅 효율이 좋아짐을 확인하였다.

• 한국대기환경학회지
• /
• 제31권5호
• /
• pp.472-481
• /
• 2015

Black carbon (BC) aerosols were monitored at the KIST site ($37.603^{\circ}N$, $127.046^{\circ}E$) and Cheonan-KOREATECH site ($36.766^{\circ}N$, $127.281^{\circ}E$) during the pre KORea-US Air Quality Study (KORUS-AQ) campaign using a couple of Muliti Angle Absorption Photometers (MAAP). BC mass concentrations were presented as $2.14{\pm}1.06{\mu}g/m^3$ and $0.94{\pm}0.60{\mu}g/m^3$ at KIST site (Seoul) and KOREATECH site (Cheonan), respectively. BC mass concentrations measured at KIST and KOREATECH sites from 22:00 on May 22 to 12:00 on May 23, 2015 showed 80% and 72% higher than average BC mass concentrations measured during campaign period, respectively. It indicates both sites could be influenced by a remote source. Similar patterns of BC concentrations between two sites from 20:00 to 24:00 on June 6, 2015 implies that the BC could be transported into both sites and then be stagnant inside the Korean Peninsula. Diurnal variation of BC in weekdays and weekends were also presented for the KIST and KOREATECH sites. Morning rush hour peak was observed at KIST site located in metropolitan area though no distinct morning rush hour peak was not observed at KOREATECH site located in a suburban area. This study revealed transport pathways of BC near the Korean Peninsula using back-trajectory analysis of BC measured both in a metropolitan area and in a suburban area.