• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.129-130
• /
• 2017

This paper suggests study of basic structure design and structural analysis for the twin car-ferries. The rules and methodology for the analysis of strength of medium and small high speed vessels with a length of more than 50m and a width / ratio of more than 12, such as car-ferries, have not been clarified yet. Therefore, in this paper, the scantling of the members is based on the Korea Classification standards, and the car-ferries standards were additionally applied to verify the structural strength of the design. The results of this study are expected to be useful as basic data related to structural design and structural analysis of high speed twin car-ferries.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.1-7
• /
• 2020

In recent years, cargo lashing has received much importance, to help prevent the sinking of passenger ships due to the failure of vehicle and cargo lashing during the transshipment of cargo. Consequently, the standards for lashing equipment and the structure of car ferries have been revised. According to the current standards, all vehicles loaded on a car ferry sailing in smooth sea areas must be secured if the wind speed and wave height exceed 7 m/s and 1.5 m, respectively. In this study, we measured the roll and pitch of a passenger ship sailing in smooth sea areas, and compared the measurements with the results of the New Strip Method (NSM). The vessel had a maximum pitch of 1.41° and a maximum roll of 1.37° at a wind speed of 6-8 m/s and a wave height of 0.5-1.0 m, and a maximum pitch of 1.49° and a maximum roll of 2.43° at a wind speed of 10-12 m/s and a wave height of 1.0-1.5 m. A comparison of the external forces due to the motion of the hull and the bearing capacity without lashing indicated that the bearing capacity was stronger. This suggests that vehicles without lashing will not slip or fall due to weather conditions. In future, the existing vehicle lashing standards can be revised after measuring the hull motions of various ships, and comparing the external force and bearing capacity, to establish more reasonable requirements.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1044-1050
• /
• 2021

After the occurrence of several passenger ship accidents in Korea, various systems are being developed for passenger ship safety management. A total of 162 passenger ships operate along the coast of Korea, of which 105 (65 %) are car-ferries with open vehicle decks. The car-ferry has a navigation pattern that passes through 2 to 4 islands. Safety inspections at the departure point(home port) are carried out by the crew, the operation supervisor of the operation management office, and the maritime safety supervisor. In some cases, self-inspections are carried out for safety inspections at layovers. As with any system, there are institutional and practical limitations. To this end, this study was conducted to suggest a method of detecting a vehicle using image processing and linking it to the calculations for ship stability. For vehicle detection, a method using a difference image and one using machine learning were used. However, a limitation was observed in these methods that the vehicle could not be identified due to strong background lighting from the pier and the ship in the cases where the camera was backlit such as during sunset or at night. It appears necessary to secure sufficient image data and upgrade the program for stable image processing.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.6
• /
• pp.440-450
• /
• 2016

The capsizing and consequent sinking of a coastal car ferry was recently reported, with numerous human casualties. The primary cause was determined to be a sudden turn with improperly stowed and secured cargo. Part I of this study introduces how long term acceleration components are determined from seakeeping analyses. A carferry with a displacement of 1,633 tonf was selected as the target vessel. Sea data that included the significant wave heights and periods were collected at four observation buoys, some of which were far away from two main voyage routes: Incheon-Jeju and Pusan-Jeju. Frequency response analyses were performed to obtain the linearized radiation force coefficients, hydrostatic stiffnesses, and wave excitation forces. Time response analyses were sequentially performed to produce the motion-induced acceleration processes. The probabilistic distributions of the acceleration components were determined using a peak and valley counting method. Long term extreme acceleration components were proposed as a final result.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.279-280
• /
• 2022

In the case of domestic coastal ships, an information system for the purpose of managing cargo loading, securing, and inspection processes is not in operation. It presents functional elements that meet the service requirements for information systems for more efficient execution of ship loading and unloading services at port. This is a study on the information system that manages the process of reservation, onboard arrangement, securing and inspection of sea freight.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.463-465
• /
• 2024

본 연구는 중국 동북3성과 우리나라간의 카페리 화물 물동량 예측을 수행하여 노후 카페리선박에 대한 경제성 평가에 기초자료로 활용하고자 하며 친환경 선박으로의 대체하는데 있어 정책금융 지원에 대한 근거자료를 확보 하고자 한다.

• Journal of Distribution Science
• /
• v.5 no.2
• /
• pp.55-78
• /
• 2007

Northeast Asia is one of the regions which have been developing so rapidly. Yellow sea, located between Korea and China, became a very important logistical zone because of its huge volume of cargo and big passenger traffic. These two countries continuously are enlarging their port facilities such as berths, container yards, storage capacity and their information system in this the Pan Yellow sea area. Two countries also introduce many new liner routes and car-ferry shipping services. Therefore there must be a severe competitions and conflicts among the countries and their companies and ports as well. Some experts worry about the over capacity of port and logistics facilities. This paper investigated the current conditions of Korea-China shipping route, container and car-ferry route, and found out the problems and tasks, with the support of many experts. There are so many alternatives and strategies to solve and rationalize the shipping route and the problems of ports of two countries. This paper suggest many strategies connecting with marketing 4Ps. As port service is also a kind of service product, we can categorize the strategies into 4Ps suggested by McCarthy. And this paper classify all these alternatives into 3 dimensions. There are competitive strategies, cooperative strategies and coopetition strategies. This paper propose some directions and ideas for adopting the strategy in the port and logistical topics between Korea and China, suggesting 3 dimensions of strategies. After this paper, many diagnoses and practical investigations should be executed to introduce optimal solutions and minimize the additional cost.

• Journal of Korea Port Economic Association
• /
• v.37 no.3
• /
• pp.35-53
• /
• 2021

Over the past 20 years, Korea's number of international passengers and freight transportation records has increased by 8.6% per year, respectively. However, despite the development of sea lanes and increased voyages, there have been constant calls for improving the inefficient management of international passenger ports. Hence, this paper presents improvements and further directions for international passenger port management. Focusing on the Incheon International passenger port as a representative case study, the main results show that the most important, urgent, possible measures for improving the port management include (i) the expansion of customs personnel and implementation of a 24-hours customs clearance system in operation, (ii) installation of buffer facilities between the ferry and ferry cargo and establishment of hinterland specialized in car ferry freight in a facility, and (iii) clear standards for cost-bearing subjects and limitation of high cost related to terminal use in institution. These results imply the need for government policy access and investment reflecting stakeholder opinions at various levels, such as operation, facilities, institution, and so forth, for efficient management of international passenger ports.

• Proceedings of the Korea Port Economic Association Conference
• /
• 2006.08a
• /
• pp.159-179
• /
• 2006

As the current trend to the main index of the port competitiveness evaluation, the competitiveness index of the port service comes to more important than the part of expense, location and facility. To reform the bottleneck of port has an effect on improving port service competitiveness. Therefore, this study shows the importance of analyzing bottlenecks on logistics to improve port competitiveness. It collected recent questionnaire data which are the subject as the Custom Service, the Chamber of Commerce and Industry, the Trade Association about bottlenecks of port logistics for working out bottlenecks of domestic port logistics and it produced the order of priorities of bottlenecks by multiplying each output priorities and weights of each process in user of Incheon inner-outer port which is focused on container freight by analysis of priority and Analytic Hierarchy Process(AHP). Unlike existing studies, this study has important values. It presents the priority evaluation only focused on the container freight was produced by port users who are categorized into shipping company, terminal operation company and forwarder, car-ferry in Incheon inner-outer port and making a application of logistics process. It means internal and external competitiveness improvement plan can be presented more concretely and detailed than past competitiveness attributes such as location, facility, service and expense. If the analysis of port logistics bottlenecks which was focused on container freight is extended to the part of general cargo and sundries such as haul grain, car, scrap iron, those studies will be able to provide Incheon port users with useful information and a model of analyzing overall bottleneck of logistics in Incheon port.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.12
• /
• pp.815-821
• /
• 2015

Maritime safety has been more critical recently due to the occurrence of shipboard accidents involving prime movers. As such, the propulsion shafting design and construction plays a vital role in the safe operation of the vessel other than focusing on being cost-efficient. Smaller vessels propulsion shafting system normally install high speed four-stroke diesel engine with reduction gear for propulsion efficiency. Due to higher cylinder combustion pressures, flexible couplings are employed to reduce the increased vibratory torque. In this paper, an actual vibration measurement and theoretical analysis was carried out on a propulsion shafting with V18.3L engine installed on small car-ferry and revealed higher torsional vibration. Hence, a rubber-block type flexible coupling was installed to attenuate the transmitted vibratory torque. Considering the flexible coupling application factor, reduction gear stability due to torque variation was analyzed in accordance with IACS(International Association of Classification Societies) M56 and the results are presented herein.