• Journal of Korea Port Economic Association
• /
• v.33 no.4
• /
• pp.73-82
• /
• 2017

Korea is the fifth largest producer of automobiles in the world, and this industry accounts for the highest portion of the entire manufacturing industry. It is an especially important industry occupying second place in the top 10 export items in Korea. Korea exports about 3 million units of cars produced in the country and abroad, based on new cars and excluding second hand cars. Japan, along with Korea, represents a high portion of the global automobile industry, and it exports more than 4 million cars to the rest of the world. In particular, both Korea and Japan export automobile and used cars produced within the country, almost all of them by PCC(Pure Car Carrier) or PCTC(Pure Car Truck Carrier). Therefore, automobile export ports are located near automobile factories, and are being used in export to foreign countries. However, there are inefficient problems, such as poor port facilities, yard space shortage for loading and unloading operations and lack of proficiency of cargo handling companies. As a result, there are delays in cargo operations, or ships waiting have occurred. Therefore, the purpose of this study is to measure and compare the efficiency of automobile export ports in Korea and Japan. To measure the efficiency of automobile export port, we used CRS and VRS models from DEA. The input and output parameters were set as length of quay, yard area and throughput of cars, and DMUs are 25 ports for evaluating the efficiency. As a result of the efficiency measurements, two Korean ports (Gwangyang and Ulsan) and three Japanes ports (Kanda, Omaezaki, Kanmon-Shimonoseki) showed high efficiency in both models. These results can be used to establish strategies for enhancing efficiency and competitiveness of automobile export ports in Korea and Japan.

• Resources Recycling
• /
• v.23 no.2
• /
• pp.3-16
• /
• 2014

Car exhaust $CO_2$ gas reduction and fuel efficiency of the car lighter for the current era is a big challenge. The developments of high-performance Nd magnets, Li-ion secondary battery and exhaust gas purification performance of PGM catalysts used in the lightweight EV and HEV are activated. Country in order to improve the car lighter and function that use the resources of rare metals are ubiquitous imported from China because of export supply control, as soaring prices have unstable supply and demand. Compared to the emissions from the next-generation automotive recycling, waste scarce resources need to be. This study investigated the recycling technology analysis and development of the information technology, or delivered to the researchers by giving national car industry aims to contribute to the development. Findings, pulmonary high-performance motor vehicle emissions in the exhaust gas purification PGM Catalysts, Li-ion battery and Nd magnets recycling technology, such as pre- and post-processing techniques to classify technology, pre-urban mining technology mechanical separation by screening techniques under development, the study and post-processing technology has, pyro and hydro metallurgical smelting technology is established. Waste Recycling in terms of economic efficiency of mechanical components for the intensive study of screening techniques is needed.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.10
• /
• pp.1046-1054
• /
• 2006

The raw water DOC contained 39.3% of hydrophilics, 42.9% of hydriophobic, and 17.8% of transphilic. The hydrophobic fraction in this raw water was mostly fulvic acid. Fulvic acid comprised of 62% and the rest was humic acid(38%). There was more carboxylic acid functional group(64%) than phenolic group(36%). HPI-N and HPI-C comprised of 17% and 22% in the hydrophilic portion, respectively. The fouling mechanisms on the membrane surface and into its porous structure were analyzed in terms of several kinetic models. In order to analyze the fouling kinetics, the various kinetic models described in this paper were used to fit the experimental results. The kinetic models and kinetic constants obtained for each operation condition. The permeate flux was rapidly declined by simultaneous pore blocking and cake formation. Also, the permeate flux declined with decreasing internal pore size resulted from organic deposition into the membrane pore. The results of the membrane fouling test using UF membrane according to NOM fractions. HPI-N caused more fouling than HPI-C. Humic acid caused more fouling than fulvic acid probably due to higher adsorption capacity. Since humic acid has higher adsorption capacity than fulvic acid, it would be more adsorbed onto the membrane pores.

• Journal of Korea Port Economic Association
• /
• v.23 no.2
• /
• pp.87-107
• /
• 2007

A rapid growth of interregional trade between China and Korea requires new development and expansion of ports. Currently, there is no rail-ferry system between China and Korea, however, a rapid growth of car-ferry industry shows possibilities. Several candidate cities and regions in East part of China and West part of Korea are selected. We identified times in clearance and station-to-station services as major benefits. We compared three transport modes including candidate cities and regions: container ships, car-ferry and rail-ferry. We used AHP (Analytic Hierarchy Process) as an evaluation method to select most competitive rail-ferry routes between two countries. We also used 7-point Likert scales to find out bottlenecks and factors to introduce rail-ferry services as other questionnaires. As a result, Rail Ferry System(RFS) is a little expensive due to wagon loading efficiency in cargo hold of the ship compared to Car Ferry System or Liner Shipping System. But RFS is recommendable in case of Block Train transport between Korea and EU area by may of TCR and TSR comparing Car Ferry System, because it can reduce total transport cost and connecting procedure at border lines of passing countries.

• The Journal of the Korea Contents Association
• /
• v.19 no.8
• /
• pp.473-482
• /
• 2019

People's leisure activities have increased due to changes in perception of social life. Camping cars are becoming popular due to the development of camping culture and traveling. However, there are not many users compared to the population of the camper due to the difficulty of economy and usability. Making it not easy to purchase or rent a camping car. Therefore, this study researches on camping service by combining shared services. It is aimed to provide a user centered camping shared service considering usage and economic efficiency. This study analyzed the concept, characteristics and current status of shared service and camping car with reference to domestic, overseas literature and internet data to provide basic data of camping car using shared service. In addition, through case study of shared vehicles, it is possible to grasp the current market. Integrate P2P, B2C, renting company and individuals to derive the design of A2P (All to People)service which connects and shares all. The user can have its own space available at the desired place and time. This study is a camping or unique mobile space service design that can be easily experienced in everyday life. It will reduce the strain of maintaining expenses and also process of pick up, return is freely making user-centered service design. This service design will lead to a diverse range of leisure activities and contribute to the upsweep of the camper industry.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.4
• /
• pp.457-464
• /
• 2021

Cargo securing safety, which is one factor for the safe operation of car ferry ships, has been applied since 2015 and evaluated by comparing the hull motion and securing load capacity generated by waves. To ensure the safe operation of the 3700 ton class car ferry, it is important to analyze the hull acceleration motion based on the sea wave information of the navigation area to determine the cargo securing load that can prevent the movement of cargo. In this study, the meteorological information of three wave buoys installed in Busan and Jeju area was analyzed for the past 5 years. In addition, the hull acceleration was measured in actual sea conditions and compared to that of numerical simulations. Under the condition of a significant wave height of 2.5 m from Feb to Mar, except typhoon seasons, the lateral acceleration was observed to be 1.5 m/s² in real ship measuring and 1.8 m/s² in numerical calculation. It was analyzed to be less than 40% under general weather conditions compared to the high wave warning using an approximate formula for estimating the hull motion by wave height. The cargo securing safety proposed in this study will be widely used based on the actual measuring acceleration with the sea wave height.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.829-832
• /
• 2009

Recently, IT-centered convergence between different industries has undergone rapid expansion, accompanied by major advances in u-IT development and digital convergence. Notably, in the automotive-IT convergence sector, automotive sensors and electronic devices interact closely and intelligently with each other, thereby increasing driver safety and convenience and creating the optimal driving environment. This has led to the generation of value-added for the future-oriented automotive industry. Sensing technologies - which are used to monitor traffic situations and transmit correct information (or warnings) on the road traffic situation to car drivers, and to provide accurate information to road traffic controllers - represent both the birth of high-safety, intelligent automotive technologies and the key to automotive manufacturing. In view of these developments, this paper examines the characteristics and structure of the automotive sensor industry, and outlines the policy implications for the automotive sensor industry with regard to the development of the automotive-IT convergence industry.

• Journal of Sensor Science and Technology
• /
• v.28 no.3
• /
• pp.157-163
• /
• 2019

The LiDAR sensor, which is widely regarded as one of the most important sensors, has recently undergone active commercialization owing to the significant growth in the production of ADAS and autonomous vehicle components. The LiDAR sensor technology involves radiating a laser beam at a particular angle and acquiring a three-dimensional image by measuring the lapsed time of the laser beam that has returned after being reflected. The LiDAR sensor has been incorporated and utilized in various devices such as drones and robots. This study focuses on object detection and recognition by employing sensor fusion. Object detection and recognition can be executed as a single function by incorporating sensors capable of recognition, such as image sensors, optical sensors, and propagation sensors. However, a single sensor has limitations with respect to object detection and recognition, and such limitations can be overcome by employing multiple sensors. In this paper, the performance of an eight-channel scanning LiDAR was evaluated and an object detection algorithm based on it was implemented. Furthermore, object detection characteristics during daytime and nighttime in a real road environment were verified. Obtained experimental results corroborate that an excellent detection performance of 92.87% can be achieved.

• Design & Manufacturing
• /
• v.17 no.3
• /
• pp.21-27
• /
• 2023

The mold industry in Japan, an advanced country in the mold industry, is also at a point of great change. The main causes are the Ukraine crisis and the collapse of the global supply chain (parts supply chain) caused by COVID-19. In addition, the prices of overseas products are rising sharply due to rapid exchange rate fluctuations (decrease in the value of the yen). Until now, Japan's monotsukuri industry has been actively pursuing overseas expansion, riding the trend of globalization. However, the trend began to rapidly reverse, and now the monotsukuri industry that had expanded overseas is showing a tendency to return to Japan. Another factor of change is the change in the automobile industry, which is the most demanded product in the mold industry. As the automobile industry evolves from gasoline cars to electric cars, the number of parts that make up a car will drastically decrease. This trend is expected to increase the demand for small-scale production of a variety of products in the mold industry, and furthermore, it is expected that short delivery times will be required in parts development. As in Korea, the production population working in the mold industry is rapidly decreasing in Japan as well. Even if you add up the total population working in manufacturing in Japan, it only accounts for about 15%. Even in Japan, it is judged that it will be difficult to sustain the monotsukuri industry with this small production population. Therefore, since improvement in production efficiency cannot be expected with the same manual dexterity as before, the mold industry is also demanding the development of mold technology at a different level than before to increase productivity. In this paper, I would like to introduce new Japanese mold technology collected through attending the Intermold exhibition. This is an example of applying a dedicated pin (Gastos) to a mold to prevent an increase in internal pressure during plastic injection molding, and a deep drawing press molding technology with an inherent hydraulic function.

• Journal of the Korea Convergence Society
• /
• v.9 no.7
• /
• pp.231-240
• /
• 2018

Automobile industry is facing a variety of risks, including the rise of international oil price and the increase of car prices. In addition to the government's deregulation, efforts should be made to improve management aiming at higher production efficiency. In this study, we established a model for evaluating the procurement logistics based on the Fuzzy-AHP-TOPSIS by using the factors that are actually used in real companies aimed at the improvement of procurement logistics. A total of three automobile factories of Company G were chosen as the evaluation subject. In the result of the Fuzzy-AHP analysis that was conducted on a sample of three car factories, solving the long-term quality problems, minimizing the stop time due to the shortage of materials, preventing the of equipment accident, and solving the short-term quality problems were proven to be the most important factors. TOPSIS analysis result indicated that Factory B had the best procurement logistics. Our study has significance that it can contribute to the improvement of efficiency in the automobile industry as the evaluation model suggested in this study can be used for regular evaluation related to the procurement logistics in the future.