• International Journal of Computer Science & Network Security
• /
• 제21권8호
• /
• pp.161-166
• /
• 2021

The term parking management system usually refers to the custom built hardware intensive systems installed in building and malls. However, there are many places where such expensive solutions cannot be installed due to various reasons, like cost and urgent/temporary setup requirements. This project focuses on developing a parking management system based on image processing to detect vacant parking slot in an area where automated systems are not installed. Camera images of the parking area are subjected to image processing algorithm which marks virtual slots in the area and extracts occupancy information to guide the incoming drivers about availability and position of vacant spaces. The application consists of two interfaces: one for the guidance of the incoming drivers and the other one for the administrator. The later interface also informs the administrator if a car is not parked properly in the virtual slot. This parking system would reduce the stress and time wastage associated with car parking and would make the management of such areas less costly.

• 한국산학기술학회논문지
• /
• 제18권3호
• /
• pp.374-380
• /
• 2017

약 IoT(Internet of Things)는 인터넷을 기반으로 모든 사물을 연결하여 사람과 사물, 사물과 사물, 사물과 시스템 간의 정보를 상호 소통하는 지능형 기술 및 서비스 등을 지칭 한다. 사물인터넷환경의 발전은 더욱 경량화되고 지능적인 센서, 가볍고 다양한 환경에 적용 가능한 네트워크 프로토콜의 발전을 수반하고 있다. 이러한 요소기술의 발전은 안전기능과 사용자 편의성 등을 적용한 스마트카 환경의 빠른 발전을 도모하고 있다. 이러한 발전은 긍정적인 효과를 발위하기도 하지만 보안 문제가 해결되지 않는다면 스마트카 서비스는 개인 생활의 큰 재앙을 유발 할 수 있다. 스마트카는 기존 차량에 여러 형태의 통신기능이 적용되고 차량을 제어 할 수 있는 다양한 기능이 제공되며 이에 대한 인증우회, 데이터 위변조를 통한 차량의 불법 제어를 통한 오동작 유발, 차량 운행 정보 탈취를 통한 개인 행태 정보 유출 등 다양한 보안 위협을 유발할 수 있다. 이에 본 논문에서는 사물인터넷 환경에서의 스마트카 서비스의 형태를 알아보고 스마트카 서비스가 가지는 보안 위협을 시나리오 기반으로 도출하고 이에 대한 대응 방안을 제시함으로서 안전한 스마트카 활용 방안을 제시하고자 한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.246-249
• /
• 2007

It is very important that there are saving resource and energy in the future as well as in these day. Weight saving of structural parts, which are formed by extrusion, plays a key role in manufacturing field. Extruded aluminum parts' cross sections are constant in the axial direction by conventional extrusion method. Especially these aluminum parts used in the car need other processes to vary the cross section in the axial direction. Thus, applications of these parts are limited by high cost. if the cross section of the parts is variable by only extrusion, application of extruded aluminum parts will more increase. Therefore, a new CNC extruder which can control the section area of a car part was invented the nation's first. Using the extrusion machine, the experiment was performed to validate the workability.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.334-338
• /
• 2012

현재 우리나라에서는 일반 자동차 부품처럼 보급되고 있는 자동차 블랙박스는 하드웨어 기반의 장비로, 추후 애로사항 수정 및 추가기능 업데이트가 불가능하다. 또한 여러 가지 물리적 문제로 인하여 많은 운전자들이 불편을 겪고 있다. 현재 출시된 블랙박스는 GPS와 영상정보만 수집하여 추후 저장된 사고기록을 바탕으로 사고원인의 규명 할 때 신뢰성이 낮은 결과가 나올 수 있다. 본 논문에서는 앞에서 서술한 기존 자동차 블랙박스의 문제점을 해결하고자 기존의 블랙박스에서 취급하는 정보 이외에 OBD프로토콜을 통해 수집되는 자동차 내부정보를 다루는 안드로이드 OS용 자동차 블랙박스 어플리케이션을 개발하고자 한다.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.75-81
• /
• 1999

In this paper, the details of electronically controlled CVT is described , which Kia Motor company recently developed in prototype form for hybrid passenger car. This transmission has two input shafts, one for engine and the other for traction motor. The shaft for traction motor is located at rear side which is extended from primary pulley shaft and connected to traction motor through adapter gear box. Adopting two input system, various driving mode is available such as motor alone driving in hybrid vehicle application. As far as electrohydraulic system concerned , this transmission uses two bleed type variable force solenoids for line pressure and ratio control, and one on-off solenoid for clutch control. Another feature for this transmission is that oil pump for transmission is separate from CVT for supplying oil pressure even at vehicle standstill.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.118-126
• /
• 2003

Digital Manufacturing is a technology facilitating effective developments and agile productions of the product via digital computer models representing physical and logical schema and the behavior of the real manufacturing systems including manufacturing resources, environments and products. For the successful application of this technology, a digital factory as a well-designed and an integrated environment is essential. In this paper, we constructed the sophisticated digital factory of a Korean automotive company's body shop, and conducted precise simulations of unit cell, lines and the whole factory for the collision check, the production flow analysis and the off-line programming. We expect that this digital factory of the body shop helps us achieve great savings in time and cost for many manufacturing preparation activities of the new car development.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1100-1103
• /
• 2007

For the past decade many effort has been delivered to understand noise generation mechanism for the small size engine cooling fan. As a result of that effort, the low noise fan such as the Wave fan was developed. Now the Wave fan becomes the well known low noise engine cooling fan. But in case of the new car development, the system in the new car will be different from previous one. So we need system optimization for every new model. In case of special application, a low speed fan should be developed to match system requirement. In that case, we meet severe engineering requirement by conducting fan system optimization instead of the simple fan scaling. In this paper, I will show you the system optimize process.

• Communications for Statistical Applications and Methods
• /
• 제18권4호
• /
• pp.549-557
• /
• 2011

In this paper, we apply cluster analysis to "Okayama parking data" that is one of the spatial point patterns data that includes locations and the fare structure of car parking space in Okayama central area. This study classifies the characteristics of small areas through Okayama parking data as well as visualizes the results of the cluster analysis. We develop web applications that connect the results of a cluster analysis and overlay objects including points of balloons and rectangles of small areas over a map of Okayama central area.

• 대한의생명과학회지
• /
• 제17권3호
• /
• pp.185-190
• /
• 2011

Adenovirus type 5 (Ad5) vectors have been used for gene transfer to a wide variety of cell types in vivo and in vitro. The advantages of adenovirus vectors include the high titer of virus readily obtained in large scale preparations, their ability to transduce dividing and non dividing cells, and the high level of transgene expression. Since adenovirus vectors do not integrate in host cell DNA, there is a lack of insertional mutagenesis. However, many human tumor cells lack expression of the adenovirus 5 receptors and contain areas of hypoxia. In order to identify the pattern of replication and gene expression of oncolytic adenovirus in hypoxic condition, multiple different fiber modified Ads (Ad5F/S11, Ad5F/S35, Ad5F/K7, Ad5F/K21, and Ad5F/RGD) was compared. The replication of all fiber modified adenovirus was inhibited in hypoxic condition in HEK 293 cells, but gene expression has variety on different tumor cell lines and the level of coxackievirus and adenovirus receptor (CAR) expression. These data suggest that CAR expression pattern and hypoxic condition of tumor are considered for optimal oncolytic adenovirus application.

• Journal of information and communication convergence engineering
• /
• 제6권2호
• /
• pp.222-227
• /
• 2008

The important problem in designing a Fuzzy Logic Controller(FLC) is generation of fuzzy control rules and it is usually the case that they are given by human experts of the problem domain. However, it is difficult to find an well-trained expert to any given problem. In this paper, I describes an application of genetic algorithm, a well-known global search algorithm to automatic generation of fuzzy control rules for FLC design. Fuzzy rules are automatically generated by evolving initially given fuzzy rules and membership functions associated fuzzy linguistic terms. Using genetic algorithm efficient fuzzy rules can be generated without any prior knowledge about the domain problem. In addition expert knowledge can be easily incorporated into rule generation for performance enhancement. We experimented genetic algorithm with a non-trivial vehicle controling problem. Our experimental results showed that genetic algorithm is efficient for designing any complex control system and the resulting system is robust.