• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.1-8
• /
• 2020

This study presents a shear strength estimation model, in which the shear failure of a reinforced concrete (RC) member is assumed to be governed by the flexure-shear mechanism. Two shear demand curves and corresponding potential capacity curves for cracked tension and uncracked compression zones are derived, for which the bond mechanism developed between reinforcing bars and surrounding concrete is considered in flexural analysis. The shear crack concentration factor is also addressed to consider the so-called size effect induced in large RC members. In addition,unlike exising methods, a new formulation was addressed to consider the interaction between the shear contributions of concrete and stirrup. To verify the proposed method, an extensive shear database was established, and it appeared that the proposed method can capture the shear strengths of the collected test specimens regardless of their material properties, geometrical features, presence of stirrups, and bond characteristics.

• Asia Marketing Journal
• /
• v.22 no.4
• /
• pp.27-45
• /
• 2021

This study examines the effects of celebrity endorsed advertising from a new perspective of the prior research that emphasizes the matchup between the brand and the celebrity. Due to the recent sharing experiences of the celebrity and their fans on SNS, it is hypothesized that the shared stories would impact viewers' responses that are often expressed in their likes, dislikes, shares and comments on SNS. In this study, the episodic type of advertising is hypothesized to have more favorable and active responses from viewers than the typical celebrity image-focused ads would have. By crawling and analyzing viewers' responses on YouTube toward 12 BTS endorsed ads, the hypotheses are confirmed as higher ratio of likes, lower ratio of dislikes and significantly higher ratio of comments over both total views and total likes were found. For the rationale behind, total 1800 comments were categorized into 4 major content types such as attached, experiential, empathic and self-related ones that are all considered as important factors influencing the strong ad effect. The results showed that the episodic ads have marginally more emotional comments than the celeb image ads. The difference was only found in experiential and empathic responses but not in self-related responses. Contrary to the hypothesis, the comments expressing attachment were found more for the celebrity image-focused ads than the episodic ones. It does not seem to suggest that the celebrity image focused ads are better to capture viewers' attachment towards the celebrity and the ad endorsed, but that the episodic ads draw viewers into relatively deeper level of attachment such as empathy by perceiving the authenticity of the celebrity and the brand. In conclusion, the shared stories on SNS can be a factor in the match-up theory on celebrity endorsed ad effects.

• Journal of Korea Trade
• /
• v.25 no.2
• /
• pp.75-94
• /
• 2021

Purpose - This article will take the Korean manufacturing industry as an example to estimate Korea's global value chain status from the perspective of overall and sub-industry, hoping to provide a theoretical reference for Korean manufacturing to climb the global value chain. Design/methodology - Based on the WIOD data. The data is calculated by using MATLAB (2014a) coding. The data for 6 sectors are classified according to the International Standard Industrial Classification revision 3 (ISIC Rev. 3), the WIOD data are used to calculate and compare the position, participation and dynamics of the Korea, China and USA' manufacturing industry in the 1995-2016. Findings - The empirical results supported conclusions of the theoretical model. In the Korean GVC of electrical and optical sector, while stronger forward linkages than backward linkages to GVC are advantageous for an average advanced country, the benefits of downstream tasks are pronounced for non-advanced countries. And proved the correlation for an index to capture a country's upstream position or downstream position, it makes sense to compare that Korea's exports of intermediates in the same sector that are used by China and USA. Originality/value - The first is to re-examine the characteristics of South Korea's participation in global value chains under a more systematic and accurate theoretical framework, which provides a new empirical reference for related research; the second is to content covers of the manufacturing 6 sectors, so as to more completely describe the characteristics of Korean manufacturing's participation in global value chains; The value of this paper is providing empirical evidence of the effect of Korea's the GVC of manufacturing sectors. In the GVC of 6 sectors, first three have a higher position in the value chain and are in the upper middle and upper reaches of the GVC. The latter two have a low GVC position index, which has become the main sector that pulls down the overall position of Korea's manufacturing industry.

• Progress in Medical Physics
• /
• v.32 no.4
• /
• pp.145-152
• /
• 2021

Purpose: During the treatments of cancer patients with a linear accelerator (LINAC) using photon beams with energies ≥8 MV, the components inside the LINAC head get activated through the interaction of photonuclear reaction (γ, n) and neutron capture (n, γ). We used spectroscopy and measured the dose rate for the LINAC in operation after the treatment ended. Methods: We performed spectroscopy and dose rate measurements for three units of LINACs with a portable high-purity Germanium (HPGe) detector and a survey meter. The spectra were obtained after the beams were turned off. Spectroscopy was conducted for 3,600 seconds, and the dose rate was measured three times. We identified the radionuclides for each LINAC. Results: According to gamma spectroscopy results, most of the nuclides were short-lived radionuclides with half-lives of 100 days, except for ⁶⁰Co, ⁶⁵Zn, and ¹⁸¹W nuclides. The dose rate for three LINACs obtained immediately in front of the crosshair was in the range of 0.113 to 0.129 µSv/h. The maximum and minimum dose rates measured on weekends were 0.097 µSv/h and 0.092 µSv/h, respectively. Compared with the differences in weekday data, there was no significant difference between the data measured on Saturday and Sunday. Conclusions: Most of the detected radionuclides had half-lives <100 days, and the dose rate decreased rapidly. For equipment that primarily used energies ≤10 MV, when the equipment was transferred after at least 10 minutes after shutting it down, it is expected that there will be little effect on the workers' exposure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.2
• /
• pp.239-250
• /
• 2022

LoRa is a physical layer technology designed to secure highly reliable long-range communication with introducing loco parentis tree network and chirp spreading spectrum. Since since a leaf can send message to more than one parents simultaneously with a single transmission in a region, packet delivery ratio increases logarithmically as the number of gateways increases. The delivery ratio, however, dramatically collapses even under loco parentis tree topology due to the limitations of ALOHA-like primitive MAC, . The proposed method is intended to exploit SDMA approach to reuse frequency in an area. With the view, TxPower of each sender for each message in a concurrent transmission is elaborately controlled to survive the collision at different gateway. Thus, the gain from the capture effect improves the capacity of resource-hungry Low Power and Wide Area Networks.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.3
• /
• pp.199-204
• /
• 2022

The Pacific giant octopus (Enteroctopus dofleini) is one of the most important species in the East Sea fishery of Korea. The annual production of Pacific giant octopus in 2021 was 3,880 metric ton between Gangwon province and Gyeongsangbuk province. Most of the fishing gears for the octopus fishery were based on behavioral properties such as thigmotaxis and chemotaxis. Wooden octopus box is also one of the fishing gears, which is application of thigmotaxis for the octopus capture in fishing industry. In this study, the tank experiments were designed to examine the behaviour and the effect of surface roughness to the infiltration of the octopus quantitatively. Three different types of octopus boxes were used for the experiments with different surface roughness on the average of 701.6 ㎛, 141.7 ㎛ and 2.09 ㎛ for each gear. 22 trials were conducted from June to September 2021. The normality of the experiments was tested using Shapiro-Wilk normality test (p-value < 0.05). The significance of results was conducted by Kruskal-Wallis rank sum test (Chi-squarded = 21, Degree of freedom = 3, p-value < 0.05). The use of wooden octopus box with rough surface was found to enhance the catch efficiency and observe infiltration behaviour of the octopus frequently.

• Physical Therapy Korea
• /
• v.29 no.3
• /
• pp.180-186
• /
• 2022

Background: The craniocervical flexion test (CCFT) was developed for the activation and endurance of deep cervical flexors. However, the muscle thickness and muscle thickness changing ratio of the sternocleidomastoid (SCM) and deep cervical flexor (DCF) muscles in subjects with and without forward head posture (FHP) have not been reported. Objects: To determine the difference in thickness of the SCM and DCF muscles and the difference in the muscle thickness changing ratio between SCM, DCF, and DCF/SCM 20 mmHg and DCF/SCM 30 mmHg between subjects with and without FHP. Methods: Thirty subjects with and without FHP were enrolled. The muscle thickness of the SCM and DCF was measured when maintained at a baseline pressure of 20 mmHg and a maximum pressure of 30 mmHg using a pressure biofeedback unit during the CCFT. Ultrasonography was used to capture images of SCM and DCF muscle thickness during the CCFT, which was calculated using the picture archiving and communication system (PACS). Results: We observed a significant difference within the pressure main effect between SCM and DCF at a baseline pressure of 20 mmHg and a maximum pressure of 30 mmHg (p < 0.05). However, there was no significant difference in the muscle thickness and muscle thickness changing ratio for SCM and DCF during CCFT between subjects with and without FHP. Conclusion: There was no significant difference in the muscle thickness recruitment pattern during CCFT in posture changes between subjects with and without FHP.

• Advances in aircraft and spacecraft science
• /
• v.9 no.5
• /
• pp.449-462
• /
• 2022

Space-telescopes placed in the Sun-Earth second Lagrange point (L2) observe the sky following a scan strategy that is usually based on a spin-precession motion. Knowing which regions of the sky will be more observed by the instrument is important for the science operations and the instrument calibration. Computing sky observation parameters numerically (discretizing time and the sky) can consume large amounts of time and computational resources, especially when high resolution isrequired.This problem becomesmore critical if quantities are evaluated at detector level instead of considering the instrument entire Field of View (FoV). In previous studies, the authors have derived analytic solutions for quantities that characterize the observation of each point in the sky in terms of observation time according to the scan strategy parameters and the instrument FoV. Analytic solutions allow to obtain results faster than using numerical methods as well as capture detailed characteristics which can be overseen due to discretization limitations. The original approach is based on the analytic expression of the instrument trace over the sky. Such equations are implicit and thusrequiresthe use of numeric solversto compute the quantities.In this work, a new and simpler approach for computing one ofsuch quantities(mean observation time) is presented.The quantity is first computed for pure spin motion and then the effect of the spin axis precession is incorporated under the assumption that the precession motion is slow compared to the spin motion.In this sense, this new approach further simplifies the analytic approach, sparing the use of numeric solvers, which reduces the complexity of the implementation and the computing time.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.2
• /
• pp.120-134
• /
• 2023

In this study, hydrodynamic characteristics of dam break flow were investigated by a series of experiments. The experiments were performed in a 2-D rectangular flume with obtaining instantaneous images of dam break flow to capture the free surface elevation, and pressure distributions on vertical wall and bottom of the flume. The initial water depth of the dam break flow was changed into 3 different heights, and the gate opening speed was changed during the experiments to study the effect of the gate speed in the dam break flow. Generation of dam break phenomena could be classified into three stages, i.e., very initial, relatively stable, and wall impact stages. The wall impact stage could be separated into 4 generation phases of wall impinge, run-up, overturning, and touchdown phases based on the deformation of the free surface. The free surface elevation were investigated with various initial water depth and compared with the analytic solutions by Ritter (1892). The pressures acting on the vertical wall and bottom were provided for the whole period of dam break flow varying the initial water depth and gate open speed. The measurement results of the dam break flow was compared with the hydrodynamic characteristics of green water phenomena, and it showed that the dam break flow could overestimate the green water loading based on the estimation suggested by Buchner (2002).

• Journal of the Korean Geotechnical Society
• /
• v.22 no.4
• /
• pp.73-83
• /
• 2006

Seepage analysis through unsaturated zone based on the theory of unsaturated flow is commonly performed to evaluate dam safety. However, the concepts of unsaturated soil behavior have not been transferred into the hands of practicing geotechnical engineers since the problems involving unsaturated soils often have the appearances of being extremely complex. There is variability and uncertainty associated with the unsaturated hydraulic properties that in turn will lead to variability in predicting unsaturated soil behavior such as seepage rate and the pore water pressure distribution. In this paper, measurements of the soil-water characteristic curve and saturated hydraulic conductivity for the core material of dam were conducted. Then, finite element stochastic analysis was used to capture the effect of unsaturated hydraulic properties on the seepage behavior of dam. It is observed that the amount of seepage increases, as the values of unsaturated soil parameters a and n increase. The values of m and p showed opposite trend.