• Korean Journal of Applied Biomechanics
• /
• v.27 no.1
• /
• pp.19-23
• /
• 2017

Objective: The aim of this study was to investigate the relationship between the ball velocity and the upper extremity kinematics for both dominant and non-dominant side in inexperienced participants about an overarm throwing task. Method: Seven women who are inexperienced in overarm throwing participated in this study (Age: $25.1{\pm}2.4years$, Height: $160.8{\pm}3.5$; Weight $56.5{\pm}7.8$). Participants visit the laboratory for three days with one day rest between test sessions. Whole body 3-dimensional (3D) motion capture was recorded during the overarm throwing trials with ten cameras Vicon motion analysis system (T-10, T40, Oxford Metrics Ltd, UK). Total 45 overarm throwing were recorded for each side for each test session. Ball speed also was measured 3 meters away behind the subjects and recorded for every trial. Results: Mean ball velocity was higher for dominant hand compared to non-dominant hand (p <.05). Trunk segment variables (maximum angles and angular velocities) showed the most consistent relationship with the ball velocity. Conclusion: The importance of the trunk segment during the throwing activities can be seen in some individuals. But inconsistent results between subjects emphasize the importance of the individuals' movement patterns especially for bilateral sports. The future studies should be conduct about the sequence of segments, kinetic variables and effect of training.

• Journal of Life Science
• /
• v.10 no.4
• /
• pp.403-407
• /
• 2000

For the biological control of the root-lesion nematodes, Pratylenchus spp., which damage directly and indirectly to the leaf perilla, the nematical effect of three nematode-trapping fungi, Arthrobotrys oligospora, A. conoides and A. dactyloides was evaluated in the field. Three species of Arthrobotrys were isolated from the culture soil of leaf perilla in 1998 and were observed the capture of the root-lesion nematodes, Pratylenchus spp. by adhesive hyphal networks or constricting rings on agar. At 40 days after treatment, the plant-parasitic nematodes and root-lesion nematode populations were approximately increased 3.5 fold in untreated control plot, while the nematode population in fungi treatment plots was similar to initial population. In the A. dactyloides plot, however, the population of plant-parasitic nematodes and Pratylenchus spp. was approximately reduced 65% and 53%, respectively. Thus, the fungus A. dachyloides should provide as biological agent for the control of Pratylenchus spp.

• KDI Journal of Economic Policy
• /
• v.32 no.3
• /
• pp.71-99
• /
• 2010

The concept of CoVaR introduced by Adrian and Brunnermeier (2009) is a useful tool to measure the risk spillover effect. It can capture the risk contribution of each institution to overall systemic risk. While Adrian and Brunnermeier rely on the quantile regression method in the estimation of CoVaR, we propose a new estimation method using parametric distribution functions such as bivariate normal and $S_U$-normal distribution functions. Based on our estimates of CoVaR for Korean banking industry, we investigate the practical usefulness of CoVaR for a systemic risk measure, and compare the estimation performance of each model. Empirical results show that bank makes a positive contribution to system risk. We also find that quantile regression and normal distribution models tend to considerably underestimate the CoVaR (in absolute value) compared to $S_U$-normal distribution model, and this underestimation becomes serious when the crisis in a financial system is assumed.

• Transactions of Materials Processing
• /
• v.19 no.6
• /
• pp.337-343
• /
• 2010

Current need of weight reduction in automotive part increases the application for high strength steel (HSS). The various types of high strength steels have been used to produce chassis part, control arms and trailing arms for weight reduction and increasing of fatigue durability such as dual phase steel (DP) and ferrite bainite steel (FB). But, DP and FB steels have proven to show inferiority in durability as well as press formability. Edge cracking occurred often in flange forming and hole expansion processes is the major failure encountered. This paper discussed the behavior of edge stretchability of high strength steel of DP and FB steels. Experimental works have been conducted to study the effect of punch clearance and burr direction on hole expansion ratio (HER). Also finite element simulation (FEM) has been preformed to clarify the mechanism of flange crack and support the experimental results on HER of DP and FB steels. It was simulated the whole process of blanking process following by hole expansion process and ductile fracture criterion named the modified Cockcroft-Latham model which was used to capture the fracture initiation. From the hole expansion tests and FEM simulation studies it was concluded that ferrite bainite steel showed better stretch-flangeability than dual phase steel. It was attributed to the lower work hardening rate of ferrite bainite steel than dual phase steel at the sheared edge.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.6
• /
• pp.357-363
• /
• 2008

Penetration rate of large molecule through skin is very low due to the barrier effect of stratum corneum. Novel microneedle treatment device with roll was designed for transdermal delivery of large molecular drugs such as vaccine and protein drugs. The permeation rates of FITC labelled bovine serum albumin (FITC-BSA) as a model protein were determined using modified Franz diffusion cell and hairless mouse skin which were treated by hydrogel or solution containing FITC-BSA. Fluorescent spectrophotometer was used to analyze the concentration of FITC-BSA. Microscope using fluorescent filter was used to capture the image and location of FITC-BSA in the skin. We confirmed that permeation rate of BSA was increased with the treatment by microneedle and was increased by the increasing frequency of treatment. Furthermore, the permeation rate observed from hydrogel treated skin was significantly higher than that from solution treated skin.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.10
• /
• pp.513-521
• /
• 2020

In this paper, we have developed a Fama - French five factor model (FF5 model) from Fama & French (2015) by using concept of time-varying coefficient. For a data set, we have used monthly data form Kenneth R. French home page, it include Japan portfolios (classified by using size and book-to-market) and 5 factors from July 1990 to April 2020. The first analysis, we used Augmented Dickey-Fuller test (ADF test) for the stationary test, from the result, all Japan portfolios and 5 factors are stationary. Next analysis, we estimated a coefficient of Fama - French five factor model by using a generalized additive model with a thin-plate spline to create the time-varying coefficient Fama - French five factor model (TV-FF5 model). The benefit of this study is TV-FF5 model which can capture a different effect at different times of 5 factors but the traditional FF5 model can't do it. From the result, we can show a time-varying coefficient in all factors and in all portfolios, for time-varying coefficients of Rm-Rf, SMB, and HML are significant for all Japan portfolios, time-varying coefficients of RMW are positively significant for SM, and SH portfolio and time-varying coefficients of CMA are significant for SM, SH, and BM portfolio.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.4
• /
• pp.81-90
• /
• 2006

Despite the government promoting women's participation in the engineering field, some statistics show that it has yet to be achieved. Potential reasons for this phenomenon include lower level of applications by women, or inherent gender gap in the professional field. Therefore, this study attempted to find impact of gender on college admission from the Lens Model perspective and Signal Detection Theory. This study consisted of three phases: identifying the necessary cues used in the admission process, analyzing existing data, and conducting two experiments to identify the effect of gender on admission decisions. Although the college application consisted of many cues, only five cues, school ranking, GPA, SAT score, resident status, and gender, were used to capture the officers' judgment policies for engineering admissions. Two experiments were conducted to investigate the impact of the gender factor in college admission. The enrollment officers first were presented with the existing data without the gender and asked to make dichotomous judgments. Secondly, the officers were asked to perform the judgment task with the gender cue present. Results showed that the gender did not play an important role in the judgments as expected. However, ideographical analyses on judgment strategies revealed that there were significant differences between the admission officers. Possible training implications are discussed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.634-643
• /
• 2004

In this paper are presented a concept of a new supersonic air inlet, which is designated a Multi-Row Disk (MRD) inlet, aiming at performance improvement under off-design conditions, and results of wind tunnel tests examined performance characteristics of the MRD inlet. The MRD inlet is frequently called ‘a skeleton inlet’ because of its appearance. The performance of a conventional axisymmetric inlet with a solid center body (spike) deteriorates under off-design Mach number conditions. It is due to the fact that total pressure recovery (TPR) governed by the throat area of inlet and mass capture ratio (MCR) governed by an incidence position of an oblique shock from the spike tip into the cowl can not be controlled independently in such air inlet. The MRD inlet has the spike that is composed of a tip cone and several disks arranged downstream of it, based on the experimental fact that several deep cavities on a conical surface have little negative effect on the boundary layer growth. The overall spike length of the MRD inlet is adjustable to the given flight speed by changing space between disks so that a spillage flow can be controlled independently from controlling the throat area. It could be made clear from the result of wind tunnel tests that the MRD inlet improves TPR by 10% compared with a conventional inlet with a solid spike under off-design conditions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.73-80
• /
• 2002

Dimethyl ether (DM) is one of the most attractive alternative fuel far compression ignition engine. Its main advantage in diesel engine application is high efficiency of diesel cycle with soot free combustion though conventional fuel injection system has to be modified due to the intrinsic properties of DME. Experimental study of DME and conventional diesel spray employing a common-rail type fuel injection system with a 5-holes sac type injector (hole diameter 0.168 ㎜/hole) was performed in a high pressure chamber pressurized with nitrogen gas. A CCD camera was employed to capture time series of spray images followed by spray cone angles and penetrations of DME were characterized and compared with those of diesel. Under atmospheric pressure condition, regardless of injection pressure, spray cone angles of the DME were wider than those of diesel and penetrations were shorter due to flash boiling effect. Tip of the DME spray was farmed in mushroom like shape at atmospheric chamber pressure but it was disappeared in higher chamber pressure. On the contrary, spray characteristics of the DME became similar to that of diesel under 3MPa of chamber pressure. Hole-to-hole variation of the DME spray was lower than that of diesel in both atmospheric and 3MPa chamber pressures. At 25MPa and 40MPa of DME injection pressures, regardless of chamber pressure, intermittent DME spray was observed. It was thought that vapor lock inside the injector was generated under the two injection pressures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.9
• /
• pp.939-950
• /
• 1992

The performance of common spreading code scheme employing multiple-capture receiver is compared to that of transmitter-oriented (T/O) code division multiple access (CDMA) scheme in view of the possibility of collision-free transmissions and the effect of secondary multiple-access interference. For performance comparisons, secondary multiple-access interference is characterized for the common code scheme and the T/O CDMA scheme that assures perfectly collision-free transmissions. Throughput performance is then evaluated for these two schemes with direct-sequence spread-spectrum/differential-phase-shift-keying (DS-SS/DPSK) data modulation and forward-error-control coding (BCH codes) in the presence of an additive white Gaussian noise (AWGN). It is shown that when the number of radios is relatively large, the maximum normalized throughput is greater for the common code scheme than for the T/O CDMA scheme at a moderate signal-to-noise ration(SNR).