• 한국환경과학회지
• /
• 제22권7호
• /
• pp.895-903
• /
• 2013

This study analyzed on characteristics of the ground-water capture zone in coastal areas and mid-mountainous area according to pumping rate. For this study, it targeted Jejudo island where is the volcanic island. To analyze, MODFLOW model and MODPATH model, which are the ground-water flow analysis models, were used. As a result of research, the following conclusions could be obtained. As a result of analyzing influence of a change in pumping time upon length of capture zone, the length of capture zone in coastal area was indicated to be greater in the changing ratio compared to the length of capture zone in mid-mountainous area. Next, in the coastal area, the pumping rate and the capture-zone length are changing similarly. However, in mid-mountainous area, the length of capture zone was indicated to grow when the pumping rate comes to exceed 1,500m3/day. As a result of analyzing influence of a change in pumping time upon capture area, the tendency of a change in the area was indicated similarly in coastal areas and mid-mountainous area. Especially, it could be known that the larger pumping rate leads to the more definite increase in tendency to a change in capture area. Based on this study, it was allowed to be possibly used in the suitable pumping rate in coastal areas and mid-mountainous area of the volcano island in the future. A follow-up research is judged to necessarily analyze the influence of tubular-well group upon capture zone by additionally analyzing a change in capture zone targeting the concentrated tubular well.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.480-485
• /
• 2008

In this study, two types of ramjet intake were designed for the flight condition of Mach number 2 and 5 and numerical analysis was performed. In order to widen the flight envelope range(Mach number $2{\sim}6$), movable intake concept was applied. The central body was designed so that the capture area ratio which is one of most important factors of ramjet intake design could be adjusted. And various types of cowl and movable insert part of shell were designed in order to control throat area which could increase total pressure recovery. The numerical results showed that the designed ramjet intake could be applied in various flights Mach number.

• 한국분무공학회지
• /
• 제27권3호
• /
• pp.126-133
• /
• 2022

The objective of this is to experimentally investigate the effect of mixed jet on the oxygen transfer characteristics with the primary nozzle area ratio of an annular nozzle ejector for the application of a microbial fuel cell. A direct visualization method with a high speed camera system was used to capture the horizontal mixed jet images, and a binarization technique was used to analyze the images. The clean water unsteady state technique was used for the oxygen transfer measurement. The air-water mixed jet discharging into a water tank behaved similar to a buoyancy or horizontal jet with the primary nozzle area ratio. It was found that an optimum primary nozzle area ratio was observed where the oxygen transfer performance reached its maximum value due to the decrease of air volume fraction and the increase of jet length and air bubble dispersion.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.207-210
• /
• 2008

본 논문에서는 램제트 기관의 성능을 결정짓는 공기흡입구를 램제트 엔진의 비행 목적에 맞게 비행 마하속도 4에서 기본설계를 수행하였다. 순항고도 12km, Mach $2{\sim}6$의 넓은 영역에서의 운용을 가능하게 하기 위하여 가변형 공기흡입구의 개념을 도입하였다.

• Composites Research
• /
• 제36권6호
• /
• pp.402-407
• /
• 2023

Activated carbon fibers (ACFs) are fibrous form of activated carbon (AC) with higher mechanical strength and flexibility, which make them suitable for building modules for applications including directional gas flow such as air and gas purification. Similarly, ACFs are anticipated to excel in the efficient capture of CO₂. However, due to the difficulties in fabricating monofilament carbon fibers at a laboratory scale, most of the studies regarding ACFs for CO₂ capture have relied on electrospun carbon fibers. In this study, we fabricated monofilament carbon fibers from PAN-based monofilament precursors by stabilization and carbonization. Then, ACFs were successfully prepared by chemical activation using KOH. Different weight ratios ranging from 1:1 to 1:4 were employed in the fabrication of ACFs, and the samples were designated as ACF-1 to ACF-4, respectively. As a function of KOH ratio, increase in surface area could be observed. However, the CO₂ adsorption trend did not follow the surface area trend, and the ACF-3 with second largest surface area exhibited the highest CO₂ adsorption capacity. To understand the phenomena, nitrogen content and ultramicropore distribution, which are important factors determining CO₂ adsorption capacity, were considered. As a result, while nitrogen content could not explain the phenomena, ultramicropore distribution could provide a reasoning that the excessive etching led ACF-4 to develop micropore structure with a broader distribution, resulting in high surface area yet deteriorated CO₂ adsorption.

• 한국물환경학회지
• /
• 제34권6호
• /
• pp.569-578
• /
• 2018

To minimize the negative alterations in hydrologic and water quality environment in urban areas due to urbanization, Low Impact Development (LID) techniques are actively applied. In Korea, LID facilities are classified as Non-point Pollution Reduction Facilities (NPRFs), and therefore they are evaluated using the performance evaluation method for NPRFs. However, while LID facilities are generally installed in small, distributed configuration and mainly work with the infiltration process, the existing NPRFs are installed on a large scale and mainly work with the reservoir process. Therefore, some limitations are expected in assessing both facilities using the same method as they differ in properties. To solve these problems, in this study, a new method for performance evaluation was proposed with focus on bio-retention LID facilities. EPA SWMM was used to reproduce the hydrologic and water quality phenomena in study area, and SWMM-LID module used to simulate TP interception performance by installing a bio-retention cell under various conditions through long-term simulations. Finally, an empirical formula for Load Capture Ratio (LCR) was derived based on storm water interception ratio in the same form as the existing method. Using the existing formula in estimating the LCR is likely to overestimate the performance of interception for non-point pollutants in the extremely low design capacity, and also underestimate it in the moderate and high design capacity.

• 한국항공우주학회지
• /
• 제32권8호
• /
• pp.29-36
• /
• 2004

초음속 흡입구 buzz는 입구에서의 충격파 패턴의 진동과 내부압력요동을 동반하는 불안정한 아임계 작동으로 정의할 수 있다. 이러한 유동섭동은 연소실 실화나 엔진의 구조직 손상을 일으킬 수 있다. 축대칭, 외부 압축형 흡입구에서 초음속 흡입구의 buzz 현상을 조사하기 위한 실험적 연구가 수행되었다. 자유류 마하수 2.0에서 카울 입구 직경이 30mm인 흡입구 모델이 시험되었다. 아임계 불안정성은 압력섭동의 주파수 및 입구에서의 충격파 구조 분석을 통해 조사되었다. 실험결과 전압럭 회복비는 0.42에서 0.78까지, 포획 면적 비는 0.34에서 0.98까지 변화했다. 아임계 유동의 주파수는 포획 면적비 감소에 따라 증가했으며 주파수는 범위는 $224{\sim}240Hz$였다.

• 한국추진공학회지
• /
• 제24권6호
• /
• pp.16-27
• /
• 2020

넓은 비행영역에서 스크램제트 엔진의 운용을 위해, 비행 조건의 변화에도 안정적인 성능을 나타내는 흡입구의 설계가 중요하다. 본 연구에서는 마하수 4~6, 받음각 -6도~6도의 넓은 비행영역에서 안정적인 성능을 얻기 위한 2D 고정형 흡입구의 설계 방법에 대한 연구를 수행하였다. 설계 방법 및 설계 주안점에 대해 제시한 후, 넓은 비행영역에서 높은 전압력 회복율과 유량 포획율을 갖는 흡입구를 설계함에 있어 가장 중요한 설계요소인 초기 압축각도와 비행 마하수 설계점에 따른 성능예측 및 분석을 수행하였다. 분석 결과를 바탕으로 넓은 비행영역에서 안정적인 성능을 나타내기 위한 두 가지 주요 설계요소의 선정기준을 제시하였다.

• Korean Chemical Engineering Research
• /
• 제53권3호
• /
• pp.382-390
• /
• 2015

Poly(methyl methacrylate) (PMMA) supports and amine additives were investigated to adsorb $CO_2$. PMMA supports were fabricated by using different ratio of pore forming agents (porogen) to control the BET specific surface area, pore volume and distribution. Toluene and xylene are used for porogens. Supported amine sorbents were prepared by wet impregnation of tetraethylenepentamine (TEPA) on PMMA supports. So we could identify the effect of the pore structure of supports and the quantity of impregnated TEPA on the adsorption capacity. The increased amount of toluene as pore foaming agent resulted in the decreased average pore diameter and the increased BET surface area. Polymer supports with huge different pore distribution could be fabricated by controlling the ratio of porogen. After impregnation, the support with micropore structure is supposed the pore blocking and filling effect so that it has low $CO_2$ capacity and kinetics due to the difficulty of diffusing. Macropore structure indicates fast adsorption capacity and low influence of amine loading. In case of support with mesopore, it has high performance of adsorption capacity and kinetics. So high surface area and meso-/macro- pore structure is suitable for $CO_2$ capture.

• 한국해안·해양공학회논문집
• /
• 제26권2호
• /
• pp.103-111
• /
• 2014

크기가 작은 다수의 부이들이 원형으로 배열되어 있을 때 부이를 통한 추출 파워를 포텐셜이론 통하여 살펴보았다. 부이의 크기와 배열 간격이 수심과 파장 그리고 설치면적의 반경에 비하여 작다는 가정 아래에서 다수부이로 채워진 수면에서의 경계조건식을 유도하고 이를 포함한 경계치문제를 고유함수전개법을 이용하여 해석하였다. 추출 파워와 입사파 에너지의 비인 취득 폭을 packing ratio, 배열 반경, 그리고 PTO 감쇠계수를 바꿔가면서 살펴보았다. 또한 다수의 소형 부이를 원형 배열하였을 때 추출된 파력이 같은 잠긴 체적을 갖는 대형 단일 부이보다 효율적임을 계산을 통하여 밝혔다.