• Journal of Climate Change Research
• /
• v.2 no.2
• /
• pp.69-77
• /
• 2011

While increased use of energy and fossil fuel in the recent years could worsen air quality and climate change, only few studies have been conducted on estimation of greenhouse gas emissions and characterization of emission types by sectors and regions in Korea. In this study, greenhouse gases emissions based on resions(Si, Gun, Gu) and emitted sectors(industry, transport, cemmercial and institutional, residential, waste, agriculture, others) were investigated using GHG-CAPSS(Greenhouse GasClean Air Policy Support System) developed to support to national and regional greenhouse gases reduction strategies. GHG-CAPSS follows IPCC(Intergovernmental Panel on Climate Change) Guideline methodology to categorize the emission sources and estimation of greenhouse gases using bottom-up approach. Estimated total greenhouse gases emissions were 588,011 thousand tons as $CO_2$ equivalent. Industry(50.1%) sector exhibited the highest portion followed by transport(17.6%), commercial and institutional(12.6%), residential(12.6%), waste(2.6%), agriculture(2.5%). Based on regional estimation, Gyeonggi(14.9%) demonstrated the highest emitted greenhouse gases among big cities followed by Jeonnam(12.4%), Gyeongbuk(11.0%), Ulsan(9.2%) and Seoul(8.9%).

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.3
• /
• pp.15-21
• /
• 2021

This study studied the value of the spatial organization of the temple and the form of the garden located in the Seojang area in the southwestern regions of China. The value of the Lama temple was looked into by examining the relationship between Lamaism and Lama temple through the spatial organiz ation, building arrangement, and garden of temples that served as the center of history, culture, and politics of the time in the process of converging Buddhism introduced through China's central districts and India with folk beliefs in Seojang through the poor environment. To this end, the value of the space and garden of the Lama temple was derived through the representative Lama temples, Potala Temple, Norbulingka Temple, and Dazhao Temple. First, due to the unique environment in which ice caps and green areas coexist, the representative Lama temples in Seojang, Potala Temple, Norbulingka Temple, and Dazhao Temple, are widely distributed in the form of leaning against valleys and mountain ranges based on folk beliefs and Buddhism's Jatabuli(自他不二) and mandala. the target sites are largely divided into upper and lower spaces. Second, the target sites are largely divided into upper and lower spaces. Buildings for worship are located in the upper space, and spaces for practice and garden are located in the lower space. The garden existed in two main forms. Third, the garden existed in two main forms. Located in the center of the practice space, the garden had an ideal structure to plant bo tree to escape from the two false obsession and go to a world of truth that is with the Buddha behind the world through practice like Sakyamuni, and there was a garden around the temple where meditation and exchange took place. Evergreen coniferous forests are mainly planted in the forests.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.593-601
• /
• 2021

The axial fan is an element of a blower used for ventilation in various industrial fields. Many studies on aerodynamic performance have been conducted to assess axial fans using fluid dynamics. The subject was a large axial fan size, 1800 mm in diameter with 100 horsepower. The blower's axial fan consisted of blades, hubs, hub caps, and bosses are important components. The blade design has a great influence on the aerodynamic performance. 3D point data is extracted using an aerodynamic performance prediction program, and a 3D modeling shape is generated. The blades and hubs, which are important components, can be easily modified if processed by cutting owing to the environment in which blades and hubs are manufactured through die casting or gravity casting. In this study, the structural safety of components and the analysis results of weak areas at the rated operating speed of the axial fan were verified using the maximum stress and safety factor. The tip clearance reflected in the design was the rotation of the blade. To check whether there is interference with other components, the displacement result was derived to verify the structural safety of the axial fan.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.12
• /
• pp.41-50
• /
• 2021

This study investigated the changes in engineering characteristics of sand-tire chip mixtures during repetitive loading. To quantify the changes in the maximum shear modulus according to the tire chip content in the mixtures and the particle size ratio between sand particle and tire chip, the samples were prepared with tire chip content of TC = 0, 10, 20, 40, 60, and 100%, and the particle size ratios SR were also set to be SR = 0.44, 1.27, 1.87, and 4.00. The stress of the prepared sample was applied through a pneumatic cylinder. The experiment was conducted in the order of static loading (= 50 kPa), cyclic loading (= 50-150 kPa), static loading (= 400 kPa) and unloading. The stress applied to tested mixtures was controlled by a pressure panel and a pneumatic valve by using an air compressor. The shear wave velocity was measured during static and cyclic loadings by installing bender elements at the upper and lower caps of the mold. The results demonstrated that the change in maximum shear modulus of all tested materials with varying SR during repetitive loading is the most significant when TC ~ 40%. In addition, the mixture with smaller SR at a given TC shows greater increase in maximum shear modulus during repetitive loading.

• Journal of Plant Biotechnology
• /
• v.49 no.3
• /
• pp.178-186
• /
• 2022

The tetraploid Solanum acaule is a wild potato species from Bolivia widely used for potato breeding because of its diverse attractive traits, including resistance to frost, late blight, potato virus X, potato virus Y, potato leafroll virus, potato spindle tuber viroid, and cyst nematode. However, the introgression of useful traits into cultivated potatoes via crossing has been limited by differences in endosperm balance number between species. Somatic fusion could be used to overcome sexual reproduction barriers and the development of molecular markers is essential to select proper fusion products. The chloroplast genome of S. acaule was sequenced using next-generation sequencing technology and specific markers for S. acaule were developed by comparing the obtained sequence with those of seven other Solanum species. The total length of the chloroplast genome is 155,570 bp, and 158 genes were annotated. Structure and gene content were very similar to other Solanum species and maximum likelihood phylogenetic analysis with 12 other species belonging to the Solanaceae family revealed that S. acaule is very closely related to other Solanum species. Sequence alignment with the chloroplast genome of seven other Solanum species revealed four InDels and 79 SNPs specific to S. acaule. Based on these InDel and SNP regions, one SCAR marker and one CAPS marker were developed to discriminate S. acaule from other Solanum species. These results will aid in exploring evolutionary aspects of Solanum species and accelerating potato breeding using S. acaule.

• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.494-504
• /
• 2020

Ten historic sites (denoted as A- J in this study) of a tomb were found during the construction of the east-west expressway in District 2 of Hyangnam, Hwaseong, which is implemented by the Gyeonggi-do headquarters of the Korea Land & Housing Corporation. Thetombswere first detected at siteH, and further investigations revealed various tombs from the Three Kingdoms period; artifacts such as gilt-bronze shoes and caps were excavated from wooden coffins in the tombs. The pottery examined in this study was the only pottery artifact excavated from the site. Its raw clay was soft and loose, reddish brown, and had quartz and feldspar particles of < 1 mm, which appeared to have been added as reinforcing agents. The firing temperature of the pottery was estimated to be under 800-870 ℃ as the mica remains and tridimite, which is the phase transition mineral of quartz, was not produced; a slight endothermic peak was also detected because of the hydration of sericite at 800 ℃. The condition of the artifact was severely weakened because of various factors, such as soil pressure from the stratum formed over the site and repeated freezing and thawing. The artifact could not be collected alone, and thus, surrounding soil that had attached to the artifact was also collected; the artifact was transported to the laboratory and conservation treatment was conducted in a safe and systematic manner.

• The Journal of the Korea Contents Association
• /
• v.22 no.2
• /
• pp.58-70
• /
• 2022

The emergency preparedness exercise currently conducted by the government has been conducted as a message-based exercise for more than 50 years. Therefore, in this study, a simulation-based maintenance practice model was developed focusing on infectious disease situations, and the possibility of a training system applying scientific techniques was presented. As a result, First, a simulatioon logic assuming an infectious disease outbreak situation was developed. The situation of an infectious disease outbreak was made to occur when measures are not taken within 24 hours for the death due to disease, and when appropriate measures are not taken for contaminated food (24 hours), drinking water (12 hours), and drinking water shortage (24 hours). Second, in order to implement the simulation logic, simulation engine SW was developed for emergency medical team, epidemiological investigation team, dead burial team, quarantine and disinfection team, etc., and situation map SW was developed so that these contents could be expressed in the situation map. As suggested in this paper, if scientific techniques are applied to the simulation-based government practice model to expand the scope, training will be possible by creating practical situations that can occur in the real world, and the Chungmu plan and various emergency preparedness plans will be verified.

• The Korean Journal of Mycology
• /
• v.51 no.4
• /
• pp.429-440
• /
• 2023

Wild Lentinula edodes (shiitake) strains are an important breeding material for developing new varieties suitable for various consumer preferences and environmental conditions. The morphological characteristics of 100 wild shiitake strains collected from 14 regions were investigated in a sawdust block cultivation. The characteristics of their fruiting bodies were diverse. Among them, 38% of the caps was convex, 33% was broadly umbonate, 27% was applanate, and 2% was shallowly depressed. In terms of their stipes, 55, 23, and 22% were the column, clavate, and funnel type, respectively. The shape of the cap was the most diverse on Mt. Hwaak, whereas the shape of the stipe showed various phenotypes from various regions. Even among strains collected from the same forest, different types of mushrooms were observed. In conclusion, wild shiitake strains that have adapted to various environmental stress can be used to develop new varieties. Thus, securing various genetic resources and studying their traits are important for researching breeding technology.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.1
• /
• pp.24-31
• /
• 2007

Global fates of polychlorinated biphenyl(PCB) were investigated with a fugacity based multimedia transport and fate model, Globe-POP(persistent organic pollutant). The accumulation of PCB was directly affected by the emission patterns of PCB into the atmosphere and surface areas of environmental compartments. Partition coefficients and reaction rates also influenced on the accumulation patterns of PCB. The emission patterns of PCB in 10 climate zones were consistent for the past 70 years, while the contribution of PCB in high-latitude zones to the globe has increased by cold condensation. Considering the amounts of emission and accumulation of PCB, the North temperature zone is regarded as an important source and sink of PCB. Meanwhile, in spite of no significant sources, POPs accumulate in Antarctic environments mainly due to extremely low temperature. Finally we suggested that a global water balance accounting for snow/ice should be incorporated into multimedia environmental models for high-latitude zones and polar regions with the seasonal snow pack and/or permanent ice caps. The modified model will be useful to evaluate the influence of climate change on the fate of POPs.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.3
• /
• pp.161-171
• /
• 2020

Direct seeding is one of the rice seedling establishment methods that is increasingly being practiced by farmers to save labor and reduce costs. However, this method often causes poor germination under flooding conditions after sowing. In this study, we developed japonica elite lines with quantitative trait loci (QTL) associated with anaerobic germination (AG) tolerance to overcome poor germination and seedling establishment in wet direct seeding. The QTL introgression lines were developed from a cross between weedy photoblastic rice as the AG donor and the Nampyeong variety via phenotypic and genotypic selection. Compared to Nampyeong, the survival rates of the selected lines were improved by approximately 50% and 240% under field and greenhouse conditions, respectively. To improve selection efficiency by marker assisted selection, the QTL markers associated with AG tolerance were converted to cleaved amplified polymorphic sequence markers designed based on next-generation sequence analysis. These lines retained similar agronomic traits and yield potential to the parent, Nampyeong. Among these lines, we selected the most promising line, which exhibited high survival rate and good agricultural traits under flooding conditions and named the line as Jeonju643. This line will contribute to breeding programs aiming to develop rice cultivars adapted to wet direct seeding. This study demonstrates the successful application of marker-assisted selection to targeted introgression of anaerobic genes into a premium quality japonica rice variety.