• Computers and Concrete
• /
• v.15 no.2
• /
• pp.141-166
• /
• 2015

In the present study, a Finite Element Model has been developed and used to study the effect of diameter to wall thickness ratio (D/t) of steel tube filled with concrete under axial loading on its behavior and load carrying capacity. The model is verified by comparing its findings with available experimental results. Influence of thickness and area of steel tube on strength, ductility, confinement and failure mode shapes has been studied. Strength enhancement factors, load factor, confinement contribution, percentage of steel and ductility index are defined and introduced for the assessment. A parametric study by varying length and thickness of tube has been carried out. Diameter of tube kept constant and equals to 140 mm while thickness has been varied between 1 mm and 6 mm. Equations were developed to find out the ultimate load and confined concrete strength of concrete. Variation of lateral confining pressure along the length of concrete cylinder was obtained and found that it varies along the length. The increase in length of tubes has a minimal effect on strength of tube but it affects the failure mode shapes. The findings indicate that optimum use of materials can be achieved by deciding the thickness of steel tube. A better ductility index can be obtained with the use of higher thickness of tube.

• YAKHAK HOEJI
• /
• v.34 no.3
• /
• pp.215-218
• /
• 1990

An ion chromatographic method based on indirect photometric detection of UV transparent anions was developed. Separation of anion was accomplished on strong anion exchange column (Waters SAX) using UV detector at 254 nm. Among examined UV-active additives (Dns-H, Dns-glu, Dnsser, Dns-val), Dns-glu showed the highest sensitivity. Studies on the effects of the pH and ionic strength of eluent revealed that the increase of pH and ionic strength of the eluent decreased capacity factor. The best eluent for the separation of acetate, fluoride, chloride, nitrate and bromide was $1\;{\times}\;10^{-4}M$ Dns-glu in 5 mM phosphate buffer (pH 6.30). The detection limit of chloride ion was 2.1 ng in this condition.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.780-785
• /
• 2003

Recently the trends in information storage devices need small size, mobility, high capacity, and low power consumption etc. To satisfy those, the development of high performance actuator is an important issue. Compared with general linear actuator for optical disk drive, swingarm type rotary actuator is suitable to design in small form factor and has fast access time for random access. Swingarm actuator is designed considering the structural problem and the actuating force of VCM(Voice Coil Motor). The increase of mass caused by optical components makes vibration problems of swing-arm, therefore resonance frequency should be increased and inertia has to be reduced. ANSYS FEM tool is employed in optimizing swingarm. The VCM is designed using 3-D electro-magnetic analysis, and parameters of magnetic circuit are determined to matte large flux density. The large flux density enables to achieve low power consumption. VCM holder is designed to get the mass balance of total actuator and this balance reduces the magnitude of critical mode relative to pivot bearing, It is expected that swingarm type rotary actuator designed by this method is available to variable type of micro optical disk drives.

• The Journal of Korean Association of Computer Education
• /
• v.15 no.6
• /
• pp.53-64
• /
• 2012

This study was to compare and analyze actual conditions and awareness of high school students' mobile learning. Survey was used as a research method and percentile, t-test and F-test were conducted for the statistical analyses. Results revealed that in the case of actual conditions on mobile device and mobile learning, slight differences were shown in various sub-variables, depending on independent variables (gender, grade, track); year 2010 can be the most important year for the mobile learning; high school students seldom utilize mobile learning in a small piece of time; mobile learning using Apps was not widespread yet. In the case of awareness of mobile learning, statistically significant differences were found in the use capacity of mobile devices, the increase of learning performance, and the continual interests of mobile devices.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.353-356
• /
• 2003

As the wireless mobile telecommunication system has been developed with astonishment, its offering service has also widely been expanded including various data service. Currently, the wireless mobile telecommunication network presents voice service that covers for the most part of the whole service areas. For this reason, the availability of the switching capacity in the mobile switching center(MSC) is manipulated by the required volume of voice service. However, considering the increase of data service, it is desirable for the current switching method to be modified for more efficiency. In this Paper, we analyze the data traffic caused by providing data service in the wireless mobile telecommunication network. For this, we are firstly going to review the result of the analysis in the feature of the data traffic. Secondly, based on the review, we are also going to perform analyzing the other feature of the data traffic normally generated in the wireless mobile telecommunication network. We expect that this paper would be utilized as an elementary source for the feature of the SMS data .traffic and it will be an honour for ourselves to work on it.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2825-2827
• /
• 2000

In electric power industry. load balance has been one of the most fundamental and important management goals. Therefore. the strategy to achieve high quality load management now includes load balance besides the stabilization of electricity supply and quality management of electricity. Amongst many techniques of load management. direct load management has been actively studied and utilized to increase power facility and peak load suppression. Higher peak load situation is appeared during summer than during winter in Korea. and approximately 20% of the peak load is due to the load for air-conditioning. To cope with this peak load problem during summer KEPCO is performing a research project to develop a system to remotely control air-conditioning load using wireless communication. Currently, applicable facilities are limited to small-scale air-conditioning facility that has less than 2KW power capacity. This paper described the 1st year of efforts made in the study.

• Convergence Security Journal
• /
• v.8 no.2
• /
• pp.15-25
• /
• 2008

In today's broadcasting and communication systems, many applications are converged information in a complicated manner by interworking with various networks such as satellite networks. Specifically, as broadcasting and communication systems have become more advanced in terms of technology and capacity, the increase in information assets has created new types of threats and vulnerabilities that we're not previously apparent. This paper has proposed the following methodologies for analyzing the risks and estimating the economical that could arise in broadcasting and communication convergence systems. First, the assets are prioritized by grading them according to confidentiality(copyrights), integrity, and availability. Based on such an analysis, this paper presents a model that can be used for verifying the risk variables caused by changing threats and vulnerabilities. Second, this paper presents a method for quantitatively estimating the economical caused by countermeasure costs for each time period.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.17 no.4
• /
• pp.171-180
• /
• 2013

The purpose of this study is to evaluate the effectiveness of the seismic retrofit performance for a reinforced concrete structure with steel damper. The nonlinear static analysis of the RC frame specimens with and without retrofit using the steel damper was conducted and the reliability of the analysis was verified by comparing the analysis and test results. Using this analysis model and method, additional nonlinear analysis was conducted considering varying stiffness and strength ratios between RC frame and steel damper and the failure mode of RC frame. As the result of the study, the total absorbed energy increased and the damage of RC frame was reduced as stiffness and strength ratios increased. The seismic retrofit performance, evaluated by means of the yield strength, increasing ratio of the absorbed energy and damage of the frame, increased linear proportionally with the increase of the strength ratio. In addition, the seismic retrofit performance was stable for stiffness ratios larger than 4~5. The energy absorption capacity of the frame governed by shear failure was better than that of the frame governed by flexure failure.

• Wind and Structures
• /
• v.1 no.4
• /
• pp.317-336
• /
• 1998

In this paper the appraisal of a folding dome structure under the influence of wind loading is discussed. The foldable structure considered is constructed from an assembly of interconnected elements, together with a flexible membrane, all of which are initially store in a compact form and on deployment expand, like an umbrella, into a dome structure. Loading on the dome was obtained from a wind tunnel analysis of the pressure distribution over the roof of a 1:10 scale model of the structure. The critical loading obtained from the wind tunnel investigation was used, together with individual member and material tests, to form a series of numerical non-linear finite element models which were, in turn, used to investigate the forces within the structure. The numerical analysis was used to determine the critical wind loading that the structure can sustain, as well as providing a method by which to investigate the failure modes of the structure. In order to enhance the load carrying capacity of the dome it was found that both the strength and stiffness of the structural nodes needed to be enhanced and in addition, changes were necessary to substantially increase the stiffness of the individual member and caps.

• Advances in nano research
• /
• v.3 no.2
• /
• pp.111-121
• /
• 2015

$CoFe_2O_4$ nanotubes and porous nanorods were prepared via a simple one-pot template-free hydrothermal method and were used as an adsorbent for the removal of dye contaminants from water. The properties of the synthesized nanotubes and porous nanorods were characterized by electron diffraction, transmission electron microscopy and x-ray powder diffraction. The Adsorption characteristics of the $CoFe_2O_4$ were examined using polar red dye and the factors affecting adsorption, such as, initial dye concentration, pH and contact time were evaluated. The overall trend followed an increase of the sorption capacity reaching a maximum of 95% dye removal at low pHs of 2-4. An enhancement in the removal efficiency was also noticed upon increasing the contact time between dye molecules and $CoFe_2O_4$ nanoparticles. The final results indicated that the $CoFe_2O_4$ nanotubes and porous nanorods can be considered as an efficient low cost and recyclable adsorbent for dye removal with efficiency 94% for Cobalt ferrite nanotubes and for Cobalt ferrite porous nanorods equals 95%.