• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.977-987
• /
• 2014

Since 1960's, international construction market have explosively increase and have reached up to 600 Bil. US$ through active participation of construction firms and steady support of government. Nevertheless, owners, clients and financial institutions required reasonable criteria to effectively assess the overseas business capabilities of construction firms. However, the existing methods for construction firms rarely considers the perspective of overseas business capabilities. To overcome these problems, this study proposes an evaluation system for overseas business capabilities of construction firms. First, the needs for new evaluation system is derived through FGI, and the direction of new evaluation system is presented by reviewing the limitations of existing methods. Also, the capabilities that are required for the performances for overseas businesses were analyzed through expert interviews. Finally, 31 primary evaluation indices consisting of 3 criteria - appropriateness of index, possibility of quantification, possibility of data gathering - are derived under 9 categories and 3 perspectives through surveys and consultation meeting. The preliminary investigation of 24 Korean construction firms are conducted for comparing the existing evaluation systems and to verify its applicability. The proposed method could provide a rational criterion to evaluate the construction firms, improve internal capacity of firms, and ultimately supports the success of the construction industry.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.247-265
• /
• 2017

With the increasingly diverse, sophisticated and complex character animations that can be represented in 3D animations, the importance of rigging, which can most directly affect animating quality, is becoming more and more important. In addition, rapidity is another crucial aspect of 3D animation production. So, the importance of technical director's role which is accurate and rapid handling of rigging pipeline building and immediate application and, corrections of errors during the longest and manpower consuming animation production is more becoming key. Baek Ji Won and Kim Jae-woong (2014) said, "The technical director is adding new importance to the new job, which is created by 3D animation, in conjunction with the limited production period, manpower, budget and production process." Most major overseas studios are developing in-house software to handle rigging and animation processes. Software development code is used to freely develop and modify production pipelines in accordance with the direction of the work. They are making efforts to build an optimal environment for animators. However, too many efforts and ineffective efforts have been made to develop, adapt, and stabilize the rigging process for small producers, creators, and students who do not have the capacity to develop their own in-house software or hire a technical director. This study suggests the most suitable auto-rigging tool among the many auto-rigging tools released in the market, and suggests the most accurate and quick auto-rigging process setting method for those who have insufficient knowledge about 3D character rigging. The efficiency of use of auto-rigging tool was examined.

• Journal of Life Science
• /
• v.24 no.12
• /
• pp.1301-1307
• /
• 2014

Adipose-derived stem cells (ADSCs) are considered promising tools for tissue regeneration. However, ADSCs have very poor proliferation capacity. Therefore, fetal bovine serum (FBS) is generally added to the culture media of ADSCs. As FBS contains many uncharacterized components that may affect cellular functions, methods for serum-free cultures of ADSCs have been widely investigated. In this study, to develop an efficient method for a serum-free culture of ADSC-T, we used an ADSC line established by introducing the simian virus 40 (SV40) T gene into primary ADSCs. We then investigated the effect of amino acids, vitamins, and other components on the growth of ADSC-T. When the ADSC-T cells were plated with DMEM/F12 serum-free medium, the cells did not proliferate, and the mixture of amino acids, vitamins, and B27 supplement did not increase the growth of the cells. However, when the ADSC-T cells were provided with serum-free DMEM/F12 after they had been cultured with serum-supplemented DMEM for 24 h, the cells proliferated, and the vitamins and B27 supplement increased the cell growth. Stem-Pro serum-free medium also appeared to be useful as a suspension culture for the ADSC-T cells. The ADSC-T cells secreted large amounts of proteins of around 70 kDa. Insulin-like growth factor (IGF) and fibroblast growth factor basic (FGF basic) were secreted by ADSC-T in larger amounts in the serum-free culture than in the serum-supplemented culture.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.1
• /
• pp.61-77
• /
• 2005

Statement of problem. The implant prosthesis has been utilized in various clinical cases thanks to its increase in scientific effective application. The relevant implant therapy should have the high success rate in osseointegration, and the implant prosthesis should last for a long period of time without failure. Resorption of the peri-implant alveolar bone is the most frequent and serious problem in implant prosthesis. Excessive concentration of stress from the occlusal force and biopressure around the implant has been known to be the main cause of the bone destruction. Therefore, to decide the location and angulation of the implant is one of the major considering factors for the stress around the implant fixture to be dispersed in the limit of bio-capacity of load support for the successful and long-lasting clinical result. Yet, the detailed mechanism of this phenomenon is not well understood. To some extent, this is related to the paucity of basic science research. Purpose. The purpose of this study is to perform the stress analysis of the implant prosthesis in the partially edentulous mandible according to the different nature locations and angulations using three dimensional finite element method. Material and methods, Three 3.75mm standard implants were placed in the area of first and second bicuspids, and first molar in the mandible Thereafter, implant prostheses were fabricated using UCLA abutments. Five experimental groups were designed as follows : 1) straight placement of three implants, 2) 5$^{\circ}$ buccal and lingual angulation of straightly aligned three implants, 3) 10$^{\circ}$ buccal and lingual angulation of straightly aligned three implants. 4) lingual offset placement of three implants, and 5) buccal offset placement of three implants. Average occlusal force with a variation of perpendicular and 30$^{\circ}$ angulation was applied on the buccal cusp of each implant prosthesis, followed by the measurement of alteration and amount of stress on each configurational implant part and peri-implant bio-structures. The results of this study are extracted from the comparison between the distribution of Von mises stress and the maximum Von mises stress using three dimensional finite element stress analysis for each experimental group. Conclusion. The conclusions were as follows : 1. Providing angulations of the fixture did not help in stress dispersion in the restoration of partially edentulous mandible. 2. It is beneficial to place the fixture in a straight vertical direction, since bio-pressure in the peri-implant bone increases when the fixture is implanted in an angle. 3. It is important to select an appropriate prosthodontic material that prevents fractures, since the bio-pressure is concentrated on the prosthodontic structures when the fixture is implanted in an angle. 4. Offset placement of the fixtures is effective in stress dispersion in the restoration of partially edentulous mandible.

• Journal of the Korean Dietetic Association
• /
• v.9 no.1
• /
• pp.71-80
• /
• 2003

Food intake patterns and iron nutritional status of male and female college students were studied based on dietary iron density. Dietary data were collected using the method of 24-hour recalls for 3 consecutive days from 106 students, and fasting blood were drawn to measure iron nutritional status indicators such as total iron binding capacity, serum iron, hematocrit, hemoglobin, and red blood cell count. Mean daily iron intakes of male and female students were 13.3㎎ and 10.0㎎, which were 107% and 63% of the RDA, respectively. However, dietary iron density were similar between male and female students as 5.9㎎/1,000㎉ and 5.7㎎/1,000㎉, respectively. The diets were divided into two groups according to iron density; high iron density group (6㎎/1,000㎉ or more) and low iron density group (less than 6㎎/1,000㎉). The students in high density group had lower intakes of energy, especially fat, than those in low density group. Female students in high density group showed significantly higher intakes of iron, and non-heme iron and folate than those of low density group. The students in high density group consumed more rice, hamburger, and eggs, while those in low density group consumed more Ra-myon and alcoholic beverages. The students in high density group consumed greater proportions of iron from plant-origin foods. Vegetables, legumes and seasonings were the food groups that female students in high density group consumed significantly more than those in low density group. Also the percentages of female students with iron deficiency were higher in low density group. These results suggest that diet with high iron density is important to improve iron nutritional status of women, and further research about the effective way to increase iron density in our diet is needed.

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.35-40
• /
• 2019

In this study, the mass flow rate of the heat release rate equation, which is the major factor of the oxygen consumption method, was analyzed for the fundamental investigation of the cone-calorimeter (5 m length and 0.3 m diameter). The shapes of a completely empty inside, 3 mm pore diameter mesh and pore diameter 10 mm honeycomb with 0.76 porosity were constructed using the cone-calorimeter. To calculate the mass flow rate, four bi-directional probes and thermocouples were installed in a uniform position in the vertical direction of flow. The velocity gradient and flow perturbation were measured from the increase in Reynolds number. As the flow capacity increased, the speed gradient increased in all three shapes relative to the turbulence intensity. In addition, the deviation of extended uncertainty to the mass flow was completely low in the order of empty space, mesh (d_p = 3 mm) and honeycomb (d_p = 10 mm and 𝜖 = 0.76) at the 95% confidence level. The results can be used in designs to improve the flow stability of the cone calorimeter.

• The Journal of the Korea Contents Association
• /
• v.15 no.5
• /
• pp.151-167
• /
• 2015

Korean movie maintain their market share from the highest 59.7% to the lowest 42.1% during the last ten years in Korea. However, with the multiplex and wide release strategy, the monopolies of four major distribution companies and three multiplex chain, the polarization of Korean movie's Box Office performance is deepening. With Gini-Index, concentration of film admission has been deepened in intensity from 0.53 in 2004 to 0.85 in 2014. Using Thomas Piketty's method, Movie attendance proportion of Highest 10% of the box office ranking for 2014 sharply increased to 71.2% from 30.28% in 2004 and the lowest 50% of box office ranking dropped from 11.03% in 2004 to 0.08% in 2014. Concentrations of the number of Screen, Screening, the seating Capacity have the same analogy with the polarization of film admission. However, concentration of seating share has maintained a modest increase from 0.22 in 2004 to 0.38 in 2014. This analysis shows that polarization of Korean movie box office performance is not the sole result of Natural selection of market but the result of the monopolies of distribution companies and Multiplex chains.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.3
• /
• pp.260-272
• /
• 2001

All-ceramic restorations have had a more limited life expectancy than metal ceramic restorations because of their low strength. Their relatively lower strength and resistance to fracture have restricted the use of all-ceramic crowns to anterior applications where occlusal loads are lower. But there has been increasing interest in all-ceramic restorations because patients are primarily concerned with improved esthetics. Many efforts have been made to in prove the mechanical properties of dental ceramics. This study was designed to elucidate the influence of the luting agent on the strength of the Empress 2 crown (staining technique) cemented on human teeth. Seventy extracted human permanent molar teeth were chosen. Teeth were prepared for Empress 2 crowns with milling machine on a surveyor. A dental bur was placed in the mandrel that was positioned so that the long axis of the bur was perpendicular to the surveyor base. Dimensions of the Empress 2 crown preparation were $6^{\circ}$ taper on each side, $1.5{\pm}0.1mm$ shoulder margin, and 4mm crown height. The luting cements used in this study were as follow: 1. Uncemented 2. Zinc phosphate cements (Confi-Dental) 3. Conventional glass ionomer cement : Fuji 1 (GC) 4. Resin-modified glass ionomer cements : Fuji plus (GC) 5. Adhesive cements : Panavia F (Kuralay), Variolink II (Vivadent), Choice (Bisco). Fracture test using Instron. The crowns were loaded in compressive force to evaluate the effect of these cements on the breaking strength of these all-ceramic crowns. A steel ball with a diameter of 4mm was placed on the occlusal surface and load was applied to the steel ball by a cylindrical bolt with a crosshead speed of 0.5mm per minute until fracture occurred. The fractured surface was examined using Scanning Electron Microscopic Image (SEM) to discover the correlation between fracture strength and bonding capacity. Within the limitation of this in vitro study design, the results were as follows : 1. fomentations significantly increased the fracture resistance of Empress ceramic crowns compared to control. Uncemented (206.9 N): ZPC (812.9 N): Fuji 1 (879.5 N): Fuji Plus (937.7 N): Choice (1105.4 N): Variolink II (1221.1 N): Panavia F (1445.2 N). 2. Resin luting agent, treated by a silane bond enhancing agents, yielded a significant increase in fracture resistance. In some of the Panavia F group, a fracture extended into dentin. 3. According to SEM images of fractured Empress crowns, the stronger the bond at both interfaces(crown and die), the more fracture strength was acquired.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.107-114
• /
• 2008

In wireless access systems, there has been much interest in enhancing the performance of orthogonal frequency division multiplexing OFDM) in a frequency selective fading channel. If the channel is static and is perfectly known to both the transmitter and the receiver, the water-filling technique with adaptive modulation is known to be optimal. However, for OFDM systems, this requires intensive traffic overheads for reporting channel side information on all subcarriers to the transmitter In this paper, we propose an adaptive modulation and coding scheme for bit-interleaved coded OFDM (BIC-OFDM) for downlink packet transmissions with reduced feedback information. To minimize the feedback information, we employ a rate adaptation method based on the OFDM symbol rather than on each subcarrier. To illustrate the performance gap between the optimal water-filling and the proposed scheme, we will compare cutoff rates for both schemes. It is shown that the loss is less than 2dB while the proposed scheme significantly reduces the feedback payloads. Also, the OFDM system in multiuser environment with subcarrier grouping is considered. It is shown that by exploiting multiuser diversity the throughput of the proposed scheme approaches the channel outage capacity as the number of users and the number of subcarrier groups increase.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.9
• /
• pp.279-292
• /
• 2014

Energy aware server cluster aims to reduce power consumption at maximum while keeping QoS(quality of service) as much as energy non-aware server cluster. In the existing methods of energy aware server cluster, they calculate the minimum number of active servers needed to handle current user requests and control server power mode in a fixed time interval to make only the needed servers ON. When loads change rapidly, QoS of the existing methods become degraded because they cannot increase the number of active servers so quickly. To solve this QoS problem, we classify load change situations into five types of rapid growth, growth, normal, decline, and rapid decline, and apply five different thresholds respectively in calculating the number of active servers. Also, we use a flexible scheme to adjust the above classification criterion for multi threshold, considering not only load change but also the remaining capacity of servers to handle user requests. We performed experiments with a cluster of 15 servers. A special benchmarking tool called SPECweb was used to generate load patterns with rapid change. Experimental results showed that QoS of the proposed method is improved up to the level of energy non-aware server cluster and power consumption is reduced up to about 50 percent, depending on the load pattern.